1 / 2

Bridge design 2

Bridge design 2. The next bridge that Javier designed was a Arch Bridge. For this design, we used two boxes to make the gap that the bridge will cross. We also used a piece of cardboard to put underneath the passageway to make an arch.

osgood
Download Presentation

Bridge design 2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Bridge design 2 • The next bridge that Javier designed was a Arch Bridge. • For this design, we used two boxes to make the gap that the bridge will cross. • We also used a piece of cardboard to put underneath the passageway to make an arch. • We used two boxes on both sides of the arch to make sure the arch was sturdy. • Lastly, we used a piece of cardboard that went on top of the boxes and arch to make the passageway.

  2. Bridge 2 review • After we tested the arch bridge, we noticed that this bridge was a little stronger than the beam bridge. • It began to dip slightly when we added a heavier textbook on to the cardboard.

More Related