2-1. key sanitation condition no. 2 condition and cleanliness of food contact surfaces

Sep 22, 2011

200 likes | 586 Views

2-3. Goal:Monitoring should provide assurance that food contactsurfaces including gloves and outer garments are properlydesigned, constructed and maintained to facilitate sanitation,and that they are adequately and routinely cleaned and sanitized.. 2-4.What to Monitor:? Condition of the food contact surfaces;? Cleanliness and sanitation of food contact surfaces;? Type and concentration of sanitizers(s) used; and? Gloves and outer garments which might contact food 20

Share Presentation

Embed Code

Link

oshin

Download Presentation

2-1. key sanitation condition no. 2 condition and cleanliness of food contact surfaces

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

2-1: Key Sanitation Condition No. 2 Condition and cleanliness of food contact surfaces

2-2: Food Contact SurfaceThose surfaces that contact human food and those surfaces from which drainage onto the food or onto surfaces that contact the food ordinarily occurs during the normal course of operations ( 21 CFR 110.3) Typical food contact surfaces include utensils, knives, tables, cutting boards, conveyor belts, ice makers, ice storage bins, gloves, aprons, etc..

962 views • 29 slides

Change of Condition

Change of Condition. Chapter 12. Competencies. Describe the different methods of softening steel Describe the different methods of hardening steel Describe the difference between Martensite and Austinsite. Phase Diagram.

462 views • 24 slides

Basic Building Condition Assessment – Part 2

Basic Building Condition Assessment – Part 2. Prepared for Delivery through AGLEARN. Standard Terminology. Common Definitions. May be found at the following website:. http://fsweb.wo.fs.fed.us/eng/documents/mtcconst.htm. Maintenance.

529 views • 28 slides

Condition 1

Condition 1. TPS2511 (Texas). 5V, 1.5A. A. 230V AC. Power supply. GND. TPS2511 (Texas). B. A. B. One smart phone/ Ipad is connected to P ort A which is drawing 1.5A current and user wants to connect another cell-phone which requires 500mA to P ort B.

209 views • 3 slides

Threat Condition Force Protection Condition

J2. Threat Condition Force Protection Condition .

222 views • 3 slides

The Condition of Religious Knowledge Proverbs 2:1-9

The Condition of Religious Knowledge Proverbs 2:1-9. I. The Conditions of Man for Religious Growth . 1. We must be receptive . 2. We must be Attentive . 3. We must apply God’s Word. 4. We must have a craving to grow.

183 views • 5 slides

2 6 ML condition Experimental group

College students’ learning motivation and learning performance Tsai-Ping Linda Lee ( 李采蘋 ) Providence university ,TAIWAN. Research Question The following question were used to this study: RQ1:Will the use of English pop songs in English teaching motivate students to learn English?

166 views • 1 slides

System Condition 2

Efficient use. Inefficient use. Abundant and breakdown easily. Persistent and Unnatural. Dissipative use. Tight Technical Cycles. System Condition 2. Efficient use of resources and land. Inefficient use of resources and land. Resources from poorly managed ecosystems.

218 views • 7 slides

MATL Structure (condition 2)

MATL Structure (condition 2). e. B A f. c e. c  e = c  e. B A. c  B A. f . c B A. c  B A. f. MATL Structure (condition 2). e. B A f. c e. c  e = c  e.  B A (  f). B A. c  B A. f . c B A. c  B A. f. MATL Structure (condition 2). e. B A f. c e.

127 views • 5 slides

Cleaning & Sanitation of Food Contact Surfaces

Cleaning & Sanitation of Food Contact Surfaces. Tonya Farness, MPH Walden University PUBH-6165-2 Dr. Howard Rubin Spring Quarter, 2011. The Importance of Cleaning.

733 views • 13 slides

Condition

Condition. Learning Objectives. Describe condition and different methods for measuring or indexing condition Calculate and interpret length-weight relationships Describe the advantages and disadvantages of different methods for describing condition Describe the RLP technique

710 views • 37 slides

1-1. Key Sanitation condition No. 1:

1-1. Key Sanitation condition No. 1: Safe supply for water that contacts food and food contact surfaces; Safe water supply for production of ice; and No cross-connections between potable and non-potable water. 1-2. Water is one of the most important components of

275 views • 12 slides

4-1. Key Sanitation Condition No. 4:  Condition of hand washing facilities;

4-1. Key Sanitation Condition No. 4:  Condition of hand washing facilities;  Condition of hand sanitizing facilities; and Condition of toilet facilities. 4-2. Goal: To support a necessary hand washing program to prevent

284 views • 5 slides

Waterjetting—New Standards for Assessing End Condition Cleanliness

Waterjetting—New Standards for Assessing End Condition Cleanliness. Monday, July 9, 2012; 11:00 AM - 12:00 PM (Eastern) Richard A. Burgess KTA-Tator, Inc.

750 views • 46 slides

3-1. Key Sanitation Condition No. 3:

3-1. Key Sanitation Condition No. 3:  Employee ‘practices’ to prevent cross-contamination; Separation of raw and ready-to-eat foods; and  Plant design to prevent cross-contamination. 3-2. Cross-Contamination:

266 views • 15 slides

7-1. Key Sanitation Condition No. 7: Manage persons who are diagnosed with or have

7-1. Key Sanitation Condition No. 7: Manage persons who are diagnosed with or have symptoms of an illness, wounds or other afflictions that could be a source of microbial contamination. 7-2. Goal: The primary goal of monitoring employee health is

78 views • 4 slides

6-1. Key Sanitation Condition No. 6: Proper labeling, storage and use of

6-1. Key Sanitation Condition No. 6: Proper labeling, storage and use of Potential toxic compounds. 6-2. Goal: To ensure that the labeling, storage and use of toxic compounds are adequate to protect food from contamination. 6-3. ‘What’ to Monitor:

101 views • 7 slides

Basic Building Condition Assessment – Part 2

322 views • 28 slides

4-1. Key Sanitation Condition No. 4:  Condition of hand washing facilities;

64 views • 5 slides

1-1. Key Sanitation condition No. 1:

129 views • 12 slides

Condition

Condition. Session 5. Objectives. Explain the Selection Construct - If Statement - If – else statement - Multi if statement - Nested if statement Switch statement. Conditional Statement. Conditional statements enable us to change the flow of the program

262 views • 19 slides

More Related

2-1. key sanitation condition no. 2 condition and cleanliness of food contact surfaces

2-1. key sanitation condition no. 2 condition and cleanliness of food contact surfaces

Presentation Transcript

2-1: Key Sanitation Condition No. 2 Condition and cleanliness of food contact surfaces

Change of Condition

Basic Building Condition Assessment – Part 2

Condition 1

Threat Condition Force Protection Condition

The Condition of Religious Knowledge Proverbs 2:1-9

2 6 ML condition Experimental group

System Condition 2

MATL Structure (condition 2)

Cleaning &amp; Sanitation of Food Contact Surfaces

Condition

1-1. Key Sanitation condition No. 1:

4-1. Key Sanitation Condition No. 4:  Condition of hand washing facilities;

Waterjetting—New Standards for Assessing End Condition Cleanliness

3-1. Key Sanitation Condition No. 3:

7-1. Key Sanitation Condition No. 7: Manage persons who are diagnosed with or have

6-1. Key Sanitation Condition No. 6: Proper labeling, storage and use of

Basic Building Condition Assessment – Part 2

4-1. Key Sanitation Condition No. 4:  Condition of hand washing facilities;

1-1. Key Sanitation condition No. 1:

Condition

Cleaning & Sanitation of Food Contact Surfaces