80 likes | 353 Views
Radar Signal Processing October 3, 2007. Michael Neuberg Christopher Picard. Encoder Interface Project. Encoders are used to determine the exact rotational position for elevation or azimuth of the radar dish The encoders will go in the platform seen here:. Encoder Interface Project.
E N D
Radar Signal ProcessingOctober 3, 2007 Michael Neuberg Christopher Picard
Encoder Interface Project • Encoders are used to determine the exact rotational position for elevation or azimuth of the radar dish • The encoders will go in the platform seen here:
Encoder Interface Project • The data from the encoder will be interfaced to a Xilinx FPGA • This will convert the SSI data from the encoder to data that the DSP can use • The encoders being used have a angular resolution of 0.01degrees • A circuit board will be made to interface these devices once the logic for the FPGA is complete
Xilinx FPGA • The FPGA being implemented is the Xilinx Spartan 3E • Current progress has been slow, but I am beginning to program board • Programming using ISE Webpack in VHDL Specifications of Spartan 3E: • 2,160 to 33,192 logic cells • 66 to 376 I/O • External PROM • 18 x 18 multipliers • 18 kbit dual port RAM • Low cost
ISE Webpack • This is the design tool kit that is provided by Xilinx • It features FPGA programming along with being able to simulated data • Problems now with being able to do at school (working on fixing it) ISE example
CHILL Facility Visit • Currently, a new radar dish is being built at CHILL • Here are some pictures of the facility at this time • The top picture shows the dish that will be put up • The bottom shows the concrete where the dish will sit
VCHILL (radar data) • CHILL has recorded great amounts of data • Here are some examples of this: BLIZZARD TORNADO