MODULE 1 - INTRODUCTION

MODULE 1 - INTRODUCTION SPRING - 2008 ME 302 - INTRODUCTION TO ENGINEERING DESIGN & GRAPHICS

Required Hours Hours for ME 302 2 Hours in ETC. 3.108 3 Hours in ETC. 3.142 ME majors will meet one additional hour on Monday afternoons, (either from 3:00 - 4:00 or from 4:00 - 5:00 P.M. in Room ETC. 2.108)

THOMAS KRUEGER • Office:ETC. 3.104B • Office Number:471-3014 • Cell Phone (512) 809-6070 • Email:tkrueger@mail.utexas.edu • Administrative Associate:Diana Ziegler • Office:ETC. 5.128

CLASS SCHEDULE AND OFFICE HOURS

FLOOR PLAN OF THE THIRD FLOOR

Objectives To instruct students on modern graphics and modeling fundamentals for engineering design. • Some things you will learn: • freehand sketching • drafting techniques • geometric modeling • visualization methods • computer-aided drafting and design • data reporting ME 302 students will complete a team project introducing the modern engineering design graphics process using 3D rapid prototype modeling.

Textbooks Textbook: J. H. Earle: GRAPHICS FOR ENGINEERS, Addison-Wesley Publishing Company, (latest edition). Workbook: Barr, et al., ENGINEERING DESIGN GRAPHICS SKETCHING WORKBOOK, 5th Edition, Schroff Development Corporation, Mission, Kansas. Barr, et al., ENGINEERING & COMPUTER GRAPHICS WORKBOOK – Using SolidWorks 2006

EQUIPMENT • large bow compass • 10” 30x60 transparent triangle • 6” 45x45 transparent triangle • combination scale • mechanical “Pentel” pencil • eraser – soft plastic block or pencil-type • HB grade lead for compass

Expectations • Attendance • Lecture and Manual Lab (~2 hours) • Computer Lab (~3 hours) • 1 Hour lecture on Monday afternoons • Absences excused only with written statement • Conduct • No food or beverages in labs or classrooms at any time. • Courteous and respectful behavior expected at all times. • You may leave room without permission if quiet, temporary, and infrequent. • Complete scholastic honesty.

Grading Policy • POINT SYSTEM • 20 points each for manual graphics sheet and 60 points per CAD Lab • 150 points for each of 3 quizzes • 150 points for CADD Lab #9 (ME 210) • 450 points for final exam • 1000 points for ME 302 Lecture portion • GRADES • A = at least 90% of total points • B = at least 80% of total points • C = at least 70% of total points • D = at least 60% of total points • F = less than 60% of total points • PENALTIES • 1% of total grade for each un-excused absence • 20% loss of points for assignments one period late and un-excused • 100% loss of points for assignments more than one period late and un-excused

Miscellaneous • COURSE DROP DATES • refer to course schedule • LOST ITEMS • put name and phone # on all your items (text, notebook, equipment, etc) • look in ETC 3.104 for lost items • DISABILITIES • UT Austin provides upon request appropriate academic adjustments for qualified students with disabilities. For more information, contact the Office of the Dean of Students at 471-6259, 471-4241 TDD or the College of Engineering Director of Students with Disabilities at 471-4382.

MODULE 1 - INTRODUCTION

MODULE 1 - INTRODUCTION

Presentation Transcript

Module 1 Introduction

z/VM Module 1: Introduction

CSI3531 Module 1 - Introduction

Module 1: Introduction

Activity 1: Module Introduction

Module 1 Introduction to SP

MODULE 1 INTRODUCTION

Module 1: Introduction

Module 1: Introduction to MIS

1. 1. Module Introduction

Module 1 Introduction to Radiation

Module 1: Course Introduction

Module 1 - Introduction

Module 1 Introduction - HIPT

Module 1 Introduction to Bioinformatics

Module 1 Introduction

Module 1 | Anaemia an introduction

Module 1: Introduction