1 / 24

PET/CT: Radiation Safety and Protection

PET/CT: Radiation Safety and Protection. GN Chimon PhD CEO Singapore Radiopharmaceuticals: FORTIS HEALTHCARE. Educational Objectives. Radiation regulatory limits PET exposure/dose calculations Radiation safety. Outline. Introduction to principles of radioactive materials

ownah
Download Presentation

PET/CT: Radiation Safety and Protection

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PET/CT:RadiationSafetyandProtection GN Chimon PhD CEO Singapore Radiopharmaceuticals: FORTIS HEALTHCARE

  2. Educational Objectives • Radiation regulatory limits • PET exposure/dose calculations • Radiation safety

  3. Outline • Introduction to principles of radioactive materials • Radiation regulatory limits • PET exposure/dose calculations • Radiation safety principles • PET isotope shielding • Typical exposure to staff

  4. Types of Radiation • Ionisation: electron in the inner orbit receives sufficient energy to escape from the nucleus, forming a positive and negative ion • Ionisation radiation is emitted when an electron from an outer shell falls in to take the place of the electron that was ejected • Ionisng radiations cause ionisation when they pass through matter • Different types of ionising radiation have different energies: -particles can be stopped by a sheet of paper. -particles can be stopped by 1 cm of plastic. -rays and x-rays need lead for shielding, the thickness depending on the energy of the radiation

  5. Activity of Radioactive Materials • The activity of radionuclide is a measure of the radioactivity of the substance. It is determined by the number of disintegrations per second (Bq). The activity of a radioactive material varies with time exponentially • A = A0 e-t • A = current activity at time t • A0 = original or initial activity • e = base natural log • t = amount of time elaspsed from A to A0 • λ = Radioactive decay constant • Relationship between half life and radioactive decay constant: • T½ = In2/

  6. Radionuclide Half-Life • The half-life is a characteristic of the radionuclide. It is not related to the atomic number or mass number of the material • After 2 half- lives the activity is one quarter (1/2)2 its initial value • After 3 half-lives the activity is one eighth (1/2)3 its initial value • After 10 half-lives, the activity is (1/2)10 = (1/1024) i.e. about one-thousandth its initial value • In general, the activity after n half-lives is (1/2)n its initial value

  7. Equivalent Dose • Equal absorbed doses of different radiations do not necessarily produce biological effects of the same magnitude • one unit of absorbed dose to a tissue from alpha radiation is much more harmful than one unit of absorbed dose from beta radiation • The absorbed dose of each type of radiation, must be multiplied by a radiation weighting factor WR which reflects the ability of the particular type of radiation to cause damage • The quantity obtained after such multiplication is known as the equivalent dose i.e. • Equivalent Dose = Absorbed Dose x Radiation Weighting Factor

  8. Weighting Factors

  9. Unit Equivalent Dose: mSv/Sv • UED is the sievert (Sv). Represents doses received by human beings • Radiation dose depends on the activity (Becquerel, Bq) of a radioactive source, the distance from the source, whether there is any shielding, and the exposure time. The old unit for the equivalent dose is expressed in rem • 1 Sv = 100 rem • 1 mSv = 100 mrem • 1 Sv=0.1 mrem • The sievert expresses biological effect on the human body. In radiation protection it is the biological effect of radiation which is of interest

  10. Regulatory Requirements • The Federal Code of Regulations 10 CFR20 establishes the effective dose equivalent limits (NCRP116) • Occupational = 50 mSv/yr = 5000 mrem/yr • Public = 1 mSv/yr = 100 mrem /yr • Shielding design limits (NCRP 147) • Occupational = 5 = 500 mrem/yr = 10 mrem/wk • Public = 1 mSv/yr = mrem/yr = 2 mrem/wk

  11. Radiation Dose from PET Radiopharmaceuticals A D

  12. Average Activity • Activity decays exponentially during any substantial period of exposure to radiation • PET radionuclides have short half-lives

  13. Shielding Basics • Radiation dose design limits • Radiation safety principles • Time, Distance, Shielding • The ALARA principle • As Low as Reasonably Achievable • Consider surrounding (all six directions)

  14. Radiation Safety Principles • Time • Exposure varies linearly with time •  reducing exposure time by half reduces absorbed dose by half • Minimize time personnel must spend in high exposure rate areas • Uptake rooms • Scanner rooms • Hot patient proximity

  15. Radiation Safety Principles • Distance • Exposure follows inverse-square law (1/D2) • Increase distance by 2 decrease the exposure by 4 • Within a meter, 2/D may be more accurate

  16. Radiation Safety Principles: HVL

  17. Occupancy Factor • Allows for partial occupancy with T the occupancy factor. P represents design dose per Wk • T is the weekly (40 hr) fraction of the time the location is occupied • Shielding barrier is acceptable if it decreases the dose to P/T. - if T<1, the “full-time” dose will be P/T; any shielding requirements unlikely

  18. Barrier Thickness: How Much Shielding? • Typically Physicist given an exposure level and shielding goal • Calculate the attenuation factor and corresponding # of HVL to achieve it • Xbarrier= Target Exposure / Actual Exposure • NHVL= -In(Xbarrier) / In(2) • Barrier thickness depends on barrier material (attenuation) • Tbarrier= NHVLx HVLbarrier

  19. Sample Calculation • NM Tech exposure during PET scan • Assume 6.5 mCi of F-18 FDG located 3 m away for 30 minutes • Activity @ start = 6.5 mCi; @ end = 5.4 mCi • Average activity, A = 5.95 mCi • D = 3 m, T = 0.5hr/40hr = 0.0125 • Dose/patient = 0.43 µSv/wk • Dose for 80 patients/wk= 34 µSv/wk

  20. Sample Calculation • NM Tech exposure during PET injection • Assume 15 mCi of F-18 FDG located 1 m away for 5 minutes • Average activity, A = 15 • D = 1 m, T = 0.083 hr/40 = 0.0021 • Dose/patient = 0.0017 mrem/wk • Dose for 80 patients/wk= 0.14 mrem/wk

  21. Sample Calculation • Public area adjacent to radiopharmacy • Assume unshielded exposure 10 mrem/wk • Shielding design limits: 2 mrem/wk • Office: Occupancy = 1 • Attenuation factor • Xbarrier = 2 mrem / 10 mrem = 0.2 • NHVL = –In(0.2)/In(2) = 2.32 • TLEAD = NHVL x HVLLEAD = 2.32 x 5 mm = 11.6 mm

  22. Sample Calculation • Public area adjacent to radiopharmacy • Assume unshielded exposure 10 mrem/wk • Shielding design limits: 2 mrem/wk • Waiting area: Occupancy 1/20 • Attenuation factor • Xbarrier= (20) * 2 mrem / 10 mrem = 4 • Xbarrier= P/T = < 1 implies no shielding required

  23. PET/CT facilities represents uniquechallenges for shielding • Annihilation radiation is energetic & highly penetrating • Eγ = 511 keV; HVL ~ 5 mm Pb (broad-beam) • Movement of radioactive patients in the clinic results in radiation sources that are stationary in neither space nor time • e.g., T1/2 of F-18 ~ 110 min • Space is a premium – making distance hard to exploit • Adjacent location within PET facilities are usually occupied • Increasing demand for PET-CT examinations • Scanners operate continuously for 8-10 hours/day

  24. Thank You Be Safe

More Related