600 likes | 2.02k Views
APPLICATION OF SOLAR ENERGY . TOPIC:- SOLAR THERMAL POWER PLANTS PREPARED BY:-KARTIK THAKKAR (09ME 13) ANAND THAKKAR (09 ME 18). OBJECTIVE TO UTILISE SOLAR ENERGY FOR POWER GENERATION METHODS
E N D
APPLICATION OF SOLAR ENERGY TOPIC:- SOLAR THERMAL POWER PLANTS PREPARED BY:-KARTIK THAKKAR (09ME 13) ANAND THAKKAR (09 ME 18)
OBJECTIVE • TO UTILISE SOLAR ENERGY FOR POWER GENERATION • METHODS • LOW TEMPERATURE SOLAR POWER PLANT USING FLAT PLATE COLLECTOR (600-1000) • MEDIUM TEMPERATURE SOLAR POWER PLANT USING CONCENTRATED SOLAR COLLECTORS (2500 - 4000, 10 - 30 KW) • HIGH TEMPERATURE SOLAR POWER PLANT USING TOWER SYSTEM (5000 - 7000,50 – 200 KW) TYPES OF SOLAR THERMAL POWER PLANTS
RANGE: 600 TO 1000 C • VERY LOW EFFICIENCY ABOUT 2% TO 3% • FLUIDS HAVING LOW BOILING TEMPERATURE AT ATMOSPHRIC PRESSURE LIKE REFRIGERANT R-11, BUTANE GAS. 1. LOW TEMPERATURE SOLAR POWER PLANTS
SINCE THE WATER CAN BE ONLY HEATED 800 C IN FLAT COLLECTORS, THE SYSTEM NEEDS TO USE WORKING FLUID HAVING LOW BOILING TEMP. LIKE A BUTANE GAS. • THE SYSTEM CONSISTS OF AN ARRAY OF FLAT PLATE COLLECTORS AND CIRCULATING PUMP. • THE HEATEDWATER ISCIRCULATED IN A HEAT EXCHANGER CALLED BUTANE BOILER, WHERE IT GENERATES THE BUTANE GAS AT HIGH PRESSURE. • THEBUTANEGAS ISSUPPLIED TOA BUTANE TURBINE TO PRODUCE MECH. POWER DUETO EXPANSION OF BUTANE GAS. (A) LOW TEMPERATURE FLAT PLATE COLLECTOR SOLAR POWER SYSTEM
THE VAPOURCOMING OUT OF THE TURBINE IS CONDENSED IN A CONDENSER AND SENT BACK FOR RECIRCULATIION WITH HELP OF BUTANE FEED PUMP. • THE MECHANICAL POWEROUTPUTOF TURBINE IS CONVERTED INTO ELECTRIC POWER BY GENERATOR • THE BUTANE GAS IS SUPPLIED TO A BUTANE TURBINE TO PRODUCE MECH. POWER DUETO EXPANSION OF BUTANE GAS. • THE VAPOUR COMING OUT OF THE TURBINE IS CONDENSED IN A CONDENSER AND SENT BACK FOR RECIRCULATIION WITH HELP OF BUTANE FEED PUMP. • THE MECHANICAL POWER OUTPUT OF TURBINE IS CONVERTED INTO ELECTRIC POWER BY GENERATOR
THE SYSTEM WORKS ON RANKINE CYCLE USING R-11 AS REFRIGERANT. • THE SYSTEM USES A SOLAR POND FOR COLLECTION AND STORAGE OF SOLAR ENERGY. • THE HEAT OF HOT BRINE SOLUTION FROM SOLAR POND IS USED TO EVAPORATE THE WORKING SUBSTANCE R-11 AT CONSTANT PRESSURE IN THE BOILER. • VAPOUR IS USED TO RUN THE VAPOUR TURBINE TO PRODUCE MECHANICAL POWER WHICH IS UTILIZED TO RUN A GENERATOR TO PRODUCE THE ELECTRICAL POWER. (B) SOLAR POND ELECTRIC POWER PLANT
THE EXHAUST OF TURBINE IS CONDENSED IN THE CONDENSOR AT CONSTANT PRESSURE WITH THE HELP OF COOLING WATER. • THE CONDENSATE IS RETURNED TO THE BOILER BY A PUMP AND CYCLE IS REPEATED AGAIN. • THEY ARE ONLY SUITABLE FOR VERY LOW POWER GENERATION HAVING VERY LOW EFFICIENCY.
RANGE:- 250-400 C • PARABOLIC IN LINE FOCUSSING TYPE COLLECTORS ARE USED AND GENERALLY PREFERRED BECAUSE OF LAW COST AND REQUIRED SUN TRACKING IN ONE PLANE ONLY. • WHERE PARABOLOID CONCENTRATING COLLECTORS HAVING HIGHER COST AND REQIRED SUN TRACKING IN TWO PLANES. • THE SYSETM CONSIST OF LARGE PARABOLIC TROUGH COLLECTORS DUELY INSTALLED SUN TRACKING DEVICE TO COLLECT THE SOLAR RADIATION WHICH IS USED TO HEAT A FLUID. 2. MEDIUM TEMPERATURE SOLAR POWER PLANT
THE WATER IS EVAPORATED BY HEAT AND CONVERTED INTO STEAM WHICH IS UTILISED TO RUN A TURBINE COUPLED TO ELECTRIC GENERATOR. • THE EXHAUST STEAM OF TURBINE IS CONDENSED IN THE CONDENSER WITH THE HELP OF COLD WATER CIRCULATED IN THE CONDENSER. • THE HOT WATER LEAVING THE CONDENSE4R IS EITHER SENT TO COLLING TOWER OR ITS HEAT ENERGY CAN BE USED AS PROCESSED HEAT IOF THE PLANT IS USED IN THE INDUSTRY. • THIS TYPE OF PLANT GENERALLY WORKS ON RANKINE CYCLE BUT IT CAN ALSO RUN ON BRAYTON USING AIR AS FLUID. • A 30 MW PLANT HAVE BEEN INSTALLED IN RAJASTHAN UNDER THE DEPARTMENT OF NON CONVENTIONAL ENERGY SOURCES.
CAPACITY: 50 MW - 200 MW (a) SOLAR THERMAL POWER PLANTS USING DISH COLLECTORS (b) CENTRAL TOWER RECEIVER POWER PLANT USING HELIOSTATS 3. HIGH TEMPERATURE THERMAL POWER PLANTS
THE SOLAR DISH COLLECTORS RECEIVE SOLAR RADIATION WHICH ARE COLLECTED AT COMMON FOCUSSING POINT. • SMALL VOLUME OF FLUID ARE HEATED TO HIGH TEMPERATURE & HIGH PRESSURE AND THIS HEAT IS UTILISED TO RUN A PRIME MOVER BASED ON THE STIRLING CYCLE. • DUE LIMITATUION OF SIZE AND SMALL QUANTITY OF FLUID DISH TYPE SOLAR POWER PLANTS ARE NOT SUITABLE FOR GENERATION OF POWER BEYOND FEW KW. • THIS TYPE OF POWER PLANT HAS BEEN BUILT AT HYDERABAD WHICH GENERATES 30 KW POWER AT ABOUT 30% EFFICIENCY. (a) SOLAR THERMAL POWER PLANTS USING DISH COLLECTORS
RANGE:- 600-700 C • IT USES AN ARRAY OF PLANE MIRRORS CALLED HELIOSTATS WHICH ARE INDIVIDUALLY CONTROL AND TRACKED TO REFLECT THE SOLAR RADIATION ON A RECEIVER KEPT ON TOWER OF ABOUT 500m HEIGHT. • PRODUCED STEAM IS SUPPLIED IN A CONVENTIONAL STEAM POWER PLANT COUPLED TO AN ELECRIC GENERATOR TO GENERATE ELECTRIC POWER. • THE PRESENT COST OF POWER GENERATION IS VERY HIGH UPTO 4.6 CRORES/MW. • A PILOT PLANT OF 50KW IS BUILT IN ITALY BUT WE CAN GENERATE POWER UPTO 10 MW. (b) CENTRAL TOWER RECEIVER POWER PLANT USING HELIOSTATS