E N D
1. Land-Use Planning and Engineering Geology Chapter 20
2. Land Use Planning – Why? Safety?
Is it the best use of a tract of land?
Will the intended use be a misuse of the land?
Are the resources required (water – for example) for the intended use available?
Is there a potential for pollution from this intended use of a tract of land?
3. Conversion of Rural Land Between 1997 to 2001 2.2 million acres of rural land were converted to developed uses
The rate of development is accelerating and the amount of available land has not increased
Some lands will not support any or all forms of uses
4. Land use in the United States
5. Land converted to developed land
6. Considerations in Planning What is the optimum use of a tract of land?
We must consider:
Biological factors
Ecological factors
Geological factors
Economic factors
Political factors
Aesthetic factors
7. Land-Use Options Multiple Use – using the same land for two or more purposes
Parks or green areas used for recreation and to catch fresh water during a storm to allow it to infiltrate into the ground water
Sequential use – utilize the land for two or more different purposes, one after another
Mines are used to provide the commodities found in the subsurface, then they are re-used for sanitary waste dumps, storage, or in-filled for parks
8. Multiple land use
9. Sequential Land Use
10. Federal Government and Land-Use Planning Historically, federal lands are not equally distributed throughout the states
Originally, federal emphasis was on resource development rather than preservation
Federal lands fall into two categories:
Lands intended for preservation (national parks and wilderness areas)
Lands intended for multiple use and compatible use such as grazing, logging, mining, exploration and drilling for petroleum (national forest)
11. Land ownership by state, 1997
12. Maps as a Planning Tool Land use planning requires abundant information, maps often provide much of the information:
Topography, bedrock geology, surface materials and geology, soils, depth to ground water, vegetation, population information, location of fault zones and flood plains, and more
Maps can assist planners in long term planning, establishing restrictive zoning for earthquake or flood hazards, avoidance of other hazards as well
13. Map representation of geologic considerations
14. U.S. land-use classifications
15. Maps as a Planning Tool Computers have aided planners
Information required by planners is voluminous
Computers have played an increasing role for planners to manipulate large volumes of quantitative information
Geographic Information Systems (GIS) allow planners to manipulate the data to see and use what data is useful to a planning task while minimize, or obscuring, unimportant data
GIS can allow a planner to see distinct “layers” of information that are important to the decision making process
16. Digitized maps can represent data
17. Composite map for land-use planning
21. Engineering Geology Geologic factors and considerations vary depending on the site and the project
A few considerations for a major project may include:
Rock types present in project area, are they uniform or variable
Are they fractured or faulted?
If they are, are the faults active?
Is there a landslide risk?
What types of soil or soils are present? Are they suitable for the project?
What are the hydrologic factors? Surface and subsurface
The list is nearly endless
22. Failure of structure on unstable soil
23. Relative magnitudes of loss of life and property damage from various geologic hazards
24. Engineering Geology Major projects often encounter major obstacles
Alaskan Oil Pipeline Project (1300 km long)
Spans a variety of geologic settings (rock types, structures, faults, slopes, soils, mountains, streams)
Active earthquakes, seasonal flooding, animal migration routes – all required solutions
Climate factors – North Slope is very cold with permafrost and a variable permafrost table
27. Permafrost and permafrost table
28. Differential subsidence of railroad tracks due to partial thawing of permafrost
29. Role of Testing and Scale Modeling Models are physically constructed (at a reduced scale)
Models may be tested in a computer
Failures of a variety of structures can be tested – dams, bridges, or earthquake resistant buildings
30. Scale modeling
31. Case Histories Leaning Tower of Pisa: the flow of the unstable soft clay layers
Panama Canal: Dipping layers of young volcanic rocks, lava flows, and pyroclastic deposits and dipping beds of shale and sandstone
Boston’s “Big Dig”: Glacial sediments and weakly metamorphosed mudstone
32. Geologic factors complicated construction of the Panama Canal
33. Boston’s “Big Dig”: Slurry walls keep excavations from collapsing and nearby building foundations from failing
34. Dams - Failures and Consequences A catastrophic dam failure can impact many cities, thousands of lives, and cause millions of dollars worth of property damage
St. Francis Dam: coarse sandstones; schists and mica-rich metamorphic rocks; a fault
Baldwin Hills reservoir: an active fault zone
Three Gorges Dam: control the flooding, enhance navigation, and produce energy
36. A regional overview of Hoover Dam
37. Failure of the St. Francis Dam in California
38. Benefits and issues in dam construction