1 / 10

Tomasz Targosinski Ph. D. Eng Poland 70 GRE 21-23 October 2013

Examples of strange direction indicators according ECE/TRANS/WP.29/GRE/2013/6 ( slower timing to emphasize effect ). Informal document GRE- 70 -46 ( 70 th GRE, 21-23 October 2013, agenda item 4(b)). Tomasz Targosinski Ph. D. Eng Poland 70 GRE 21-23 October 2013.

paul2
Download Presentation

Tomasz Targosinski Ph. D. Eng Poland 70 GRE 21-23 October 2013

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Examples of strangedirection indicators according ECE/TRANS/WP.29/GRE/2013/6(slower timing to emphasize effect) Informal documentGRE-70-46 (70th GRE, 21-23 October 2013, agenda item 4(b)) Tomasz Targosinski Ph. D. Eng Poland 70 GRE 21-23 October 2013

  2. "5.6. For direction indicator lamps of categories 1, 1a, 1b, 2a or 2b the flash may be produced by sequential activation of their light sources if the following conditions are met: (a) Each light source, after its activation, shall remain lit until the end of the ON cycle; (b) The sequence of activation of the light sources shall proceed in the direction from the inboard edge towards the outboard edge of the apparent surface; (c) The variation shall finish no more than 200 ms after the beginning of the ON cycle; (d) For the orthogonal projection in the direction of the axis of reference of a rectangle, circumscribing the apparent surface of the direction indicator and having its longer sides parallel to the H-plane, the ratio of the horizontal to the vertical sides shall not be less than 1.7. Compliance to the conditions mentioned above shall be verified in flashing mode.

More Related