Waves and Sound

1. Waves and Sound

2. The world is full of waves. Some waves like those in water are obvious. Others, like sound and light waves are less apparent. The wave properties of sound and light are discovered only by careful observations and experiments. In this section we want to introduce the basic properties of waves with a wave model that emphasizes those aspects of wave behavior common to all waves. Although sound waves, water waves, and radio waves are clearly different, the wave model will allow us to understand many of the important features they share. The wave model is built around the idea of a traveling wave, which is an organized rhythmic disturbance that carries energy and that travels with a well-defined wave speed.

3. Mechanical Waves Mechanical waves are waves which require a substance through which they can move. We call such a substance the medium of the wave. For instance, the medium of a water wave is the water, the medium of a sound wave is the air, and the medium of a wave on a stretched string is the string. As a wave passes through a medium, the atoms that make up the medium are displaced from their equilibrium positions. This is a disturbance of the medium. The water ripples in the picture below are a disturbance of the water’s surface. A wave disturbance is created by a source. The source of a wave might be a rock thrown into water, your hand plucking a stretched string, or an oscillating loudspeaker pushing on the air. Once created, the disturbance travels outward through the medium at the wave speed v. This is the speed with which a ripple moves across the water or a pulse travels down a string.

4. Very important note: It is the disturbance which travels through the medium. The medium as a whole does not travel! A wave does transfer energy, but it does not transfer some of the medium from here to there. For instance, the ripples on the pond (the disturbance) move outward from the splash of the rock, but there is no outward flow of water. Likewise, the particles of a string oscillate up and down but do not move in the direction of a pulse traveling along the string. A wave transfers energy, but it does not transfer any material or substance outward from the source.

5. Transverse and Longitudinal Waves Most waves fall into two general classes of waves: transverse and longitudinal. In a transverse wave, the particles in the medium move perpendicular to the direction in which the wave travels. In a longitudinal wave, the particles in the medium move parallel to the direction in which the wave travels. Transverse Wave Shaking the end of a stretched string up and down creates a wave that travels along the string in a horizontal direction while the particles that make up the string oscillate vertically. Longitudinal Waves If you give the first spring a sharp push, a disturbance travels down the chain of springs by compressing and expanding the springs. The masses move in the same direction as the wave.

6. Water waves have characteristics of both transverse and longitudinal waves. When a water wave passes, individual water molecules describe a circular path as shown to the right, exhibiting both transverse and longitudinal motion. The rapid motion of the earth’s crust during an earthquake can produce a disturbance that travels through the entire earth. The detection and analysis of these waves is the most important tools we have for understanding the earth’s interior. The two most important types of earthquake waves are S waves (which are transverse) and P waves (which are longitudinal). The P waves are faster, but the S waves are more destructive. Residents of a city a few hundred kilometers from an earthquake will feel the P waves as much as a minute before the S waves, giving them a crucial early warning. For all of these types of waves, the medium as a whole does not travel through space; the individual particles in the medium undergo back-and-forth motions around their equilibrium positions.

7. Traveling Waves When you drop a pebble in a pond, waves travel outward. But how does this happen? How does a mechanical wave travel through a medium? In answering this question, we must be careful to distinguish the motion of the wave from the motion of the particles that make up the medium. The wave itself is not a particle, so we cannot apply Newton’s laws to the wave. However, we can use Newton’s laws to examine how the medium responds to a disturbance. No new physical principles are required to understand how a wave moves. The motion of a pulse along a string is a direct consequence of the tension acting on the segment of the string. An external force may have been required to create the pulse, but once started the pulse continues to move because of the internal dynamics of the medium.

9. Sound Waves A sound wave consists of variations in pressure moving through a medium. Let’s see how a sound wave in air is created using a loudspeaker. When the loudspeaker moves forward, it compresses the air in front of it, as shown below. When the speaker moves backward, it creates a region of expansion. The compression/expansionmake up the disturbance that travels forward through the air. This is much like the sharp push on the end of a slinky. Thus a sound wave is a longitudinal wave. We usually think of sound waves as traveling in air, but sound can travel through any gas, through liquids, and even through solids. The motion of a sound wave in air is determined by the physics of the gas. Once created, the wave will propagate forward, its motion being entirely determined by the properties of the air.

10. Wave Speed Is a Property of the Medium The above discussion of waves on a string and sound waves in air show that the motion of these waves is due to the properties of the medium. A careful analysis of these waves would lead to the important and somewhat surprising conclusion that the wave speed does not depend on the shape or size of the pulse, how the pulse was generated, or how far it has traveled. The speed of a wave depends only on the properties of the medium. So what properties of a string determine the speed of waves traveling along the string? The only likely candidates are the strings mass, length, and tension. Because a pulse doesn’t travel faster on a longer and thus more massive string, neither the total mass m nor the total length L is important. Instead, the speed depends on the mass-to-length ratio, which is called the linear density. Linear density characterizes the type of string we are using. A fat string has a larger value of  than a skinny string made of the same material. Similarly, a steel wire has a larger value of than a plastic string of the same diameter.

11. Wave Speed Is a Property of the Medium • How does the speed of a wave on a string vary with the tension and the linear density? • A string with a greater tension will exert larger forces on the segments of the • string. The string will respond more rapidly, so the wave will move at a higher • speed. Wave speed increases with increasing tension. • A string with greater linear density has more inertia. It will respond less • rapidly, so the wave will move at a lower speed. Wave speed decreases with • increasing linear density. • A full treatment yields the following equation for the wave speed: FT = tension in the string μ = linear mass density = m/L

12. Picturing Waves Describing waves, both pictorially and mathematically, takes a bit more thought than describing particles and their motion. Until now, we have been concerned with quantities, such as position and velocity, which depend only on time. In other words, if we asked “Where is the object?” we would need only to specify what time t it is. The object’s position x depends only on the time t. We write this mathematically as x(t). Functions of the single variable t are all right for a particle, because a particle is in only one place at a time. But a wave is not “localized” like a particle is; a wave is spread out throughout space at each instant of time. To describe a wave mathematically requires a function that specifies what the medium is doing not only at an instant of time (when) but also at a point in space (where). In other words, we need a function of twovariables. In what follows, we’ll consider a wave on a string.

13. Snapshot and History Graphs Consider the wave pulse shown below moving along a stretched string. For now we’ll look at somewhat artificial triangular-shaped pulse to clearly show the edges of the pulse. The graph shows the strings vertical displacement y as a function of position x along the string, at a particular instant of time. This is a snapshot graphof the wave, much like what you might take with a camera. It’s a picture of the actual physical wave form at an instant in time.

14. As the wave moves, we can take more snapshots. If we place these next to each other, we get a clear picture of the wave’s motion, as shown below. Note that the wave’s shape stays the same as it moves.

15. Another way of showing several snapshots is to simply show them separately, one below the next. This shows us how the wave moves along the string as time passes. An example is shown below. The pictures to the left show a sequence of snapshots, showing how the wave moves along the string as time goes from t1 to t2 and so on. The wave pulse moves forward a distance x = vt during the time interval t. That is, the wave moves with a constant speed v. Notice also the motion of the point indicated on the string. The wave moves horizontally, while this point moves up and down. As we mentioned, the motion of the medium is distinct from the motion of the wave. Since the point on the string moves perpendicularly to the wave motion, this is a transverse wave. Each of these shots is a y-vs-x graph at a certain time t.

16. As a different way of picturing the wave, suppose we follow the dot marked on the string and make a graph showing how the displacement of this dot changes with time. The result, shown at right, is a y-vs­-t graph at a certain position (the position of the dot). We might call this a point history graph, since it tells the history of that particular point in the medium. Important note. Notice that the above graph is reversed from the snapshots on the previous page. Why? Because as the wave moves toward the dot, the steep leading edge causes the dot to rise quickly. On the y-vs-t graph, earlier times (smaller values of t) are to the left, and later times are to the right. Thus the leading edge of the wave appears on the left side of the point’s history graph.

17. The graph below shows a snapshot graph of a wave on a string that is moving to the right. A point on the string is noted. Which of the choices is the history graph for the subsequent motion of this point?

18. Sinusoidal Waves Waves can come in many different shapes. One very common shape is that described by the sinusoidal functions, sine and cosine. The way to produce a sinusoidal wave is to move an end of a string up and down in simple harmonic motion. In this case, many of the quantities carry over directly—the amplitude of the SHM is the amplitude of the wave; the same goes for the frequency and period. The graph on the left shows a sinusoidal wave moving through a medium. The source of the wave is at x = 0. Notice how the wave moves with steady speed toward larger values of x at later times t.

19. The graph below shows a point’s history graph for a point on a string as a sinusoidal wave passes by. The periodT of the wave, shown on the graph, is the time interval for one cycle of the wave to pass by a particular point. The period is related to the frequency f by T = 1/f.

20. The figure above on the left shows a snapshot graph for a sinusoidal wave. The two graphs above correspond. On the left we see that the wave stretches out in space, and moves to the right with speed v. The amplitudeA of the wave is the maximum value of the displacement. The crests of the wave (the high points) have displacement ycrest = A. The troughs (the low points) have displacement ytrough = -A. A sinusoidal wave repeats itself both in space and in time. The wavelength is the distance spanned by one cycle of the wave (a cycle being a full repeat of the shape). The wavelength in the left picture above is from crest to crest, but it could just as well be drawn from trough to trough. Wavelength is the spatial analog of period. The period T is the time in which the disturbance at a single point in space repeats itself. The wavelength  is the distance in which the disturbance at one instant of time repeats itself.

21. Since the waveform travels with constant speed v and advances a distance of one wavelength, λ, in a time interval of one period, T, we can write for the wave speed the following equation:

22. For this sinusoidal wave: • What is the wavelength? • 0.5 m • 1 m • 2 m • 4 m • For this sinusoidal wave: • What is the frequency? • 50 Hz • 100 Hz • 200 Hz • 400 Hz

23. Reflections of Waves

25. Superposition of Waves The Principle of Superposition When two or more waves are simultaneously present at a single point in space, the displacement of the medium at that point is the sum of the displacements due to each individual wave.

26. When wave pulses meet, they assume a shape that is the sum of the individual pulse shape. That is, the amplitudes add together. The two pulses move apart after overlapping, and they continue on unaffected as though they hadn’t run into another wave. This principle applies to all types of waves.

27. Constructive and Destructive Interference We say that two sound sources are in phase if they move outward together and move inward together. Suppose you are directly in the middle of two speakers which are in phase with one another. What is the wave form like at your position? Since a condensed region leaves from both speakers at the same time, and both travel the same distance, these two condensations will meet and precisely overlap at your ears. The same goes for when rarefactions leave the speakers. When two waves always meet condensation-to-condensation and rarefaction-to-rarefaction (crest-to-crest and trough-to-trough) they are said to be exactly in phase and to exhibit constructive interferenceat you location.

28. Describe what happens in the following situations: • A wave pulse hits a wall. • A wave pulse hits a free end (ring and rod). • A wave pulse on a skinny rope hits a fat rope. • A wave pulse on a fat rope hits a skinny rope. • Define the following terms: • Principle of superposition • Constructive interference • Destructive interference • Standing wave • Node • Antinode

30. The conditions for constructive interference: If d1 is the distance from source 1 to the observer, and d2 is the distance from source 2 to the same observer, the difference in the path lengths must be an integer multiple of the source wavelength. Δd = nλ( n = 0, 1, 2, 3, . . .) Here, Δd= |d2 – d1| is the path-length difference.

31. Now suppose you move to a location that is not in the middle of the speakers. If the distance from one speaker to you and the distance from the other speaker to you differ by a special amount, you will actually hear nothing at all! What must the difference in path lengths be? We call the situation when crest overlaps with trough destructive interference. Both constructive and destructive interference arise from the fact that overlapping waves follow the superposition principle. If you are at a position of destructive interference, the waves at your position are exactly out of phase.

33. The conditions for destructive interference: If d1 is the distance from source 1 to the observer, and d2 is the distance from source 2 to the same observer, the difference in the path lengths must be out of phase by half a wavelength. Δd = (2n + 1)λ/2( n = 0, 1, 2, 3, . . .) Here, Δd= |d2 – d1| is the path-length difference.

34. In a standing wave, the individual points on the string oscillate up and down, but the wave itself does not travel.

35. Creating Standing Waves The reflections at the ends of the string cause two waves of equal amplitude and wavelength to travel in opposite directions. These are the conditions that cause a standing wave. Superposition creates a standing wave.

37. The possible modes for standing waves The condition for standing waves of wavelength λ to exist on a string of length L fixed at both ends: In words: integer multiples of half-wavelengths must fit onto the string. We can rearrange: Here, f1 is the fundamental frequency. The mode number, n, tells us how many antinodes are on the string.

41. Warm Up Describe how a Ruben’s Tube works.

42. What physical aspect of a sound wave do we humans perceive as pitch? What physical aspect of a sound wave do we humans perceive as loudness? What physical aspect of a sound wave do we humans perceive as timbre?

43. Circular or Spherical Wave Fronts Plane wave fronts

45. Quantities such as loudness (and brightness) depend not only on the rate of energy transfer, or power, but also on the area that receives that power.

46. Example A bright, tightly focused laser beam pointer emits 1 mW of light power into a beam that is 1 mm in diameter. What is the intensity of the laser beam?

47. Intensity

48. Question. A plane wave, a circular wave, and a spherical wave have the same intensity. Each of the waves travels the same distance. Afterward, which wave has the largest intensity? A. The plane wave B. The circular wave C. The spherical wave

49. Loudness of Sound Suppose you are listening to one person singing. If nine people join in, so a total of 10 people are singing in unison, will the song be 10 times as loud as the soloist? No! Even though the intensity will be 10 times as great, the loudness will not be. In fact, you will perceive the sound of 10 people singing together to be approximately twice as loud as the sound of one person. Now, let’s add another 90 people, for a total of 100 singers. This will increase the intensity by another factor of 10, but it will seem to you only twice as loud as the 10 person ensemble, and four times as loud as the original soloist. In general, increasing the sound intensity by a factor of 10 results in an increase in perceived loudness by approximately a factor of 2. This allows our ears to be sensitive over a huge range of intensities. The quietest sound you can detect and the loudest sound you can safely hear differ by a factor of 1,000,000,000,000!

50. The hair cells of the cochlea are responsible for sensing sound. These tiny hairs give our ears remarkable sensitivity. Motion by as little as .5 nm can produce an electrical response!