1 / 24

Simple control system for a Stepper and DC motor using a tachometer and the HC11

Simple control system for a Stepper and DC motor using a tachometer and the HC11. Damian Marks Rekha Vemuri Instructor: Dr. Wu. Presentation Outline. Objective Background Methodology Assembly language program Discussion Conclusion. Objective .

peregrine-palacios
Download Presentation

Simple control system for a Stepper and DC motor using a tachometer and the HC11

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Simple control system for a Stepper and DC motor using a tachometer and the HC11 Damian Marks Rekha Vemuri Instructor: Dr. Wu

  2. Presentation Outline • Objective • Background • Methodology • Assembly language program • Discussion • Conclusion

  3. Objective • The objective of the project is to control and measure the speed of a motor

  4. Background • This project effectively utilizes both software and hardware. • DC Motor • Stepper motor • Counter • SKAMP light sensor • HC11 Evaluation Board (EVB)

  5. Hardware Description • DC motor • Runs on Direct Current • Speed can be controlled by changing the voltage

  6. Hardware Description (cont) • DC Motor • The motor converts electrical energy to mechanical work as the output shaft turns • DC motors consist of one set of coils, called an armature, inside another set of coils or a set of permanent magnets, called the stator. • Applying a voltage to the coils produces a torque in the armature, resulting in motion.

  7. Hardware Description • Stepper Motor • Converts electrical pulses into discrete mechanical rotational movements. • Has no brushes, or contacts • Stepper motor receives a rectangular pulse train and responds by rotating its shaft.

  8. Hardware Description • Stepper Motor • Pulse train is controlled by means of a Microcontroller. • Requires no feed back loop and sensors in controlling a stepper motor.

  9. Hardware Description • Stepper Motor Applications • Film advance

  10. Hardware Description • Stepper Motor Applications • Conveyor

  11. Hardware Description • Stepper Motor Applications • Labeling Machine

  12. Hardware Description • Stepper Motor Applications • Window Blind Gluing

  13. Hardware Description • Stepper Motor Applications • Tube Cutter

  14. Hardware Description • Counter Port E PE0 PE1 PE2 PE3 PE4 PE5 PE6 PE7 Q0 Q1 Q2 Q3 Counter

  15. Hardware Description • Skan-A-Matic SKAMP light sensor

  16. Software • Buffallo – HC11 Monitor Program • AS11.exe – Compiler1 • Assembly – Programming Language • THR 68HC11 Sim V3.06 • Hyper Terminal – The serial communication program used to interface the HC11 with the PC.

  17. Software • Assembly Language Programming Modules • Real-time interrupt • Delay Loop • Counting Sub-routine • Stepper Routine • Hexadecimal to ASCII character conversion sub-routine

  18. Real-time Flow Chart

  19. Delay Sub-routine

  20. Rotate Sub- Routine Flow chart

  21. Counter Sub-Routine Flowchart

  22. Problems Faced • Limited Memory on EVB Board • Limited Ports on EVB Board • Real-time Interrupts

  23. Conclusions

  24. Questions?

More Related