1 / 40

Manufacturing Engineering Technology Cutting-Tool Materials and Cutting Fluids

授課教師: 楊宏智 教授. Manufacturing Engineering Technology Cutting-Tool Materials and Cutting Fluids. 【 本著作除另有註明外,採取 創用 CC 「姓名標示-非商業性-相同方式分享」台灣 3.0 版 授權釋出 】. 【 本著作除另有註明外,採取 創用 CC 「姓名標示-非商業性-相同方式分享」台灣 3.0 版 授權釋出 】. 【 本著作除另有註明外,採取 創用 CC 「姓名標示-非商業性-相同方式分享」台灣 3.0 版 授權釋出 】. 楊宏智(台大機械系教授).

Download Presentation

Manufacturing Engineering Technology Cutting-Tool Materials and Cutting Fluids

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 授課教師:楊宏智教授 Manufacturing Engineering Technology Cutting-Tool Materials and Cutting Fluids 【本著作除另有註明外,採取創用CC「姓名標示-非商業性-相同方式分享」台灣3.0版授權釋出】 【本著作除另有註明外,採取創用CC「姓名標示-非商業性-相同方式分享」台灣3.0版授權釋出】 【本著作除另有註明外,採取創用CC「姓名標示-非商業性-相同方式分享」台灣3.0版授權釋出】

  2. 楊宏智(台大機械系教授) Manufacturing Engineering Technology機械製造

  3. Chapter Outline Introduction High-speed Steels Cast-cobalt Alloys Carbides Coated Tools Alumina-based Ceramics Cubic Boron Nitride Silicon-nitride-based Ceramics Diamond Whisker-reinforced Materials and Nanomaterials Tool Costs and Reconditioning of Tools Cutting Fluids

  4. Introduction Cutting tool is subjected to: High temperatures, High contact stresses Rubbing along the tool–chip interface and along the machined surface Cutting-tool material must possess: Hot hardness Toughness and impact strength Thermal shock resistance Wear resistance Chemical stability and inertness

  5. Introduction Tool materials may not have all of the desired properties for a particular machining operation

  6. Introduction Materials are used for dies and molds in casting, forming, and shaping metallic and nonmetallic materials are: High-speed steels Cast-cobalt alloys Carbides Coated tools Alumina-based ceramics Cubic boron nitride Silicon-nitride-based ceramics Diamond Whisker-reinforced materials and nanomaterials

  7. High-speed Steels High-speed steel (HSS) tools were developed to machine at higher speeds than was previously possible They can be hardened to various depths, have good wear resistance and are inexpensive There are two basic types of high-speed steels: molybdenum (M-series) and tungsten (T-series) High-speed steel tools are available in wrought, cast and powder-metallurgy (sintered) forms They can be coated for improved performance

  8. High-speed Steels EXAMPLE 22.1 Alloying Elements in High-speed Steel Cutting Tools List the major alloying elements in high-speed steels and describe their effects in cutting tools. Solution The major alloying elements in HSS are chromium, vanadium, tungsten, cobalt, and molybdenum

  9. Cast-cobalt Alloys Cast-cobalt alloys have high hardness, good wear resistance and can maintain their hardness at elevated temperatures They are not as tough as high-speed steels and are sensitive to impact forces Less suitable than high-speed steels for interrupted cutting operations

  10. Carbides Also known as cemented or sintered carbides They have the following characteristics: High hardness over a wide range of temperatures High elastic modulus High thermal conductivity Thermal expansion Versatile Cost-effective tool and die materials for a wide range of applications

  11. Carbides: Tungsten Carbide Tungsten carbide (WC) consists of tungsten-carbide particles bonded together in a cobalt matrix As the cobalt content increases, the strength, hardness, and wear resistance of WC decrease Its toughness increases because of the higher toughness of cobalt

  12. Carbides: Titanium Carbide Consists of a nickel–molybdenum matrix Has higher wear resistance than tungsten carbide but is not as tough Suitable for machining hard materials and for cutting at speeds higher than tungsten carbide

  13. Carbides: Inserts High-speed steel tools are shaped for applications such as drill bits and milling and gear cutters Inserts are individual cutting tools with several cutting points Clamping is the preferred method of securing an insert and insert has indexed (rotated in its holder) to make another cutting point available

  14. Carbides: Inserts Available in a variety of shapes: square, triangle, diamond and round The smaller the included angle, the lower the strength of the edge

  15. Carbides: Inserts Chip-breaker features on inserts for the purposes of: Controlling chip flow during machining Eliminating long chips Reducing vibration and heat generated Stiffness of the machine tool is important Light feeds, low speeds, and chatter are crucial as they tend to damage the tool’s cutting edge

  16. Carbides: Classification of Carbides ISO standards for carbide grades are classified using the letters P, M, and K

  17. Coated Tools New alloys and engineered materials are being developed to have high strength and toughness, abrasive and chemically reactive with tool materials Coatings have unique properties: Lower friction Higher adhesion Higher resistance to wear and cracking Acting as a diffusion barrier Higher hot hardness and impact resistance

  18. Coated Tools:Coating Materials and Coating Methods Common coating materials are: Titanium nitride Titanium carbide Titanium carbonitride Aluminum oxide

  19. Coated Tools:Coating Materials and Coating Methods Coatings are applied on cutting tools and inserts by two techniques: Chemical-vapor deposition (CVD) Physical-vapor deposition (PVD) Coatings have the following characteristics: High hardness Chemical stability and inertness Low thermal conductivity Compatibility and good bonding Little or no porosity

  20. Coated Tools:Coating Materials and Coating Methods Titanium-nitride Coatings Have low friction coefficients, high hardness, resistance to high temperature and good adhesion to the substrate Improve the life of high-speed steel tools and improve the lives of carbide tools, drill bits, and cutters Perform well at higher cutting speeds and feeds

  21. Coated Tools:Coating Materials and Coating Methods Titanium-carbide Coatings Coatings have high flank-wear resistance in machining abrasive materials Ceramic Coatings Coatings have low thermal conductivity, resistance to high temperature, flank and crater wear

  22. Coated Tools:Coating Materials and Coating Methods Multiphase Coatings Desirable properties of the coatings can be combined and optimized with the use of multiphase coatings Coatings also available in alternating multiphase layers

  23. Coated Tools:Miscellaneous Coating Materials Titanium carbonitride and titanium-aluminum nitride are effective in cutting stainless steels Chromium carbide is effective in machining softer metals that tend to adhere to the cutting tool More recent developments are nanolayer coatings and composite coatings

  24. Coated Tools: Ion Implantation Ions are introduced into the surface of the cutting tool, improving its surface properties Process does not change the dimensions of tools Nitrogen-ion implanted carbide tools have been used successfully on alloy steels and stainless steels

  25. Alumina-based Ceramics Ceramic tool materials consist of fine-grained and high-purity aluminum oxide Additions of titanium carbide and zirconium oxide improve toughness and thermal shock resistance Alumina-based ceramic tools have very high abrasion resistance and hot hardness

  26. Alumina-based Ceramics Cermets Consist of ceramic particles in a metallic matrix They are chemical stability and resistance to built-up edge formation But they are brittle, expensive and limited usage

  27. Cubic Boron Nitride Cubic boron nitride is the hardest material available Carbide provides shock resistance, high wear resistance and cutting-edge strength At elevated temperatures, it is chemically inert to iron and nickel Its resistance to oxidation is high and suitable for cutting hardened ferrous and high-temperature alloys

  28. Silicon-nitride-based Ceramics Silicon-nitride (SiN) based ceramic tool materials consist of silicon nitride with various additions of aluminum oxide, yttrium oxide and titanium carbide Tools have high toughness, hot hardness and good thermal-shock resistance Due to chemical affinity to iron at elevated temperature, SiN-based tools are not suitable for machining steels

  29. Diamond The hardest substance is diamond They have low friction, high wear resistance and the ability to maintain a sharp cutting edge It is used when a good surface finish and dimensional accuracy are required Synthetic or industrial diamonds are used as natural diamond has flaws and performance can be unpredictable As diamond is brittle, tool shape and sharpness are important

  30. Whisker-reinforced Materials and Nanomaterials There is continuous effort of improving the performance and wear resistance of cutting tools New tool materials with enhanced properties are: High fracture toughness Resistance to thermal shock Cutting-edge strength Creep resistance Hot hardness The use of whiskers is for reinforcing fibers in composite cutting tool materials Nanomaterials are also becoming important in advanced cutting-tool materials

  31. Tool Costs and Reconditioning of Tools Tool costs depend on the tool material, size, shape, chip-breaker features and quality The cost of an individual insert is relatively insignificant Cutting tools can be reconditioned by resharpening them Reconditioning of coated tools also is done by recoating them

  32. Cutting Fluids Cutting fluids is used to: Reduce friction and wear Cool the cutting zone Reduce forces and energy consumption Flush away the chips from the cutting zone Protect the machined surface from environmental corrosion Depending on the type of machining operation, a coolant, a lubricant, or both are used Effectiveness of cutting fluids depends on type of machining operation, tool and workpiece materials and cutting speed

  33. Cutting Fluids Cutting-fluid Action Cutting fluid seep from the sides of the chip through the capillary action of the interlocking network of surface asperities in the interface Discontinuous cutting operations have more straightforward mechanisms for lubricant application, but the tools are more susceptible to thermal shock

  34. Cutting Fluids EXAMPLE 22.2 Effects of Cutting Fluids on Machining A machining operation is being carried out with a cutting fluid that is an effective lubricant. What will be the changes in the mechanics of the cutting operation if the fluid is shut off?

  35. Cutting Fluids Solution Effects of Cutting Fluids on Machining Chain of events taking place after the fluid is shut off: Friction at the tool–chip interface will increase The shear angle will decrease in accordance The shear strain will increase The chip will become thicker A built-up edge is likely to form

  36. Cutting Fluids Solution Effects of Cutting Fluids on Machining As a result: The shear energy in the primary zone will increase The frictional energy in the secondary zone will increase The total energy will increase The temperature in the cutting zone will rise Surface finish will to deteriorate and dimensional tolerances may be difficult to maintain

  37. Cutting Fluids Types of Cutting Fluids 4 general types: Oils - mineral, animal, vegetable, compounded, and synthetic oils, Emulsions - a mixture of oil and water and additives Semisynthetics - chemical emulsions containing little mineral oil Synthetics - chemicals with additives

  38. Cutting Fluids Methods of Cutting-fluid Application 4 basic methods: Flooding Mist High-pressure systems Through the cutting tool system

  39. Cutting Fluids Effects of Cutting Fluids Selection of a cutting fluid based on: Workpiece material and machine tools Biological considerations Environment Machine-tool operator is in close proximity to cutting fluids, thus health effects is a primary concern Progress has been made in ensuring the safe use of cutting fluids Recycling involves treatment of the fluids with various additives, agents, biocides, deodorizers and water treatment

  40. Cutting Fluids:Near-dry and Dry Machining Near-dry cutting is the application of a fine mist of an air–fluid mixture containing a very small amount of cutting fluid Dry machining is effective on steels, steel alloys, and cast irons, but not for aluminum alloys One of the functions of a metal-cutting fluid is to flush chips from the cutting zone Cryogenic Machining Using nitrogen or carbon dioxide as a coolant The chips are more brittle and machinability is increased

More Related