1 / 7

Prototype MIM Case Study – Lock Pawl

Prototype MIM Case Study – Lock Pawl. Application : Remote electronic locking system Competing Technology – Plastic (MIM was desired by customer marketing for higher strength at higher temperatures) Materia l – MIM 316L, part weight 0.8 grams. MIM Case Study – Lock Pawl.

philip-clements
Download Presentation

Prototype MIM Case Study – Lock Pawl

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Prototype MIM Case Study – Lock Pawl Application: Remote electronic locking system Competing Technology – Plastic (MIM was desired by customer marketing for higher strength at higher temperatures) Material – MIM 316L, part weight 0.8 grams

  2. MIM Case Study – Lock Pawl Straightforward design, no features created by slides. Customer desired low cost prototype, how to do it?

  3. MIM Case Study – Lock Pawl For prototyping, create a square pocket in an existing mold base to fit a hand-load insert for prototyping. Tooling approach suitable for low-volume usage only.

  4. MIM Case Study – Lock Pawl Part features as they will be tooled in production can be created in the blocks. Non-traditional materials (low carbon steel, brass, aluminum) are all possible tool materials since only low volumes will be produced.

  5. MIM Case Study – Lock Pawl No ejectors make tooling simpler. Gate run to the center of the block, then dropped to customer requested location.

  6. MIM Case Study – Lock Pawl Part is easily accessible after separating the cavity halves, making for easy part removal.

  7. Lock Pawl Conclusion • Prototyping approach a success • Leadtime to tooling was short & relatively inexpensive • The prototypes were created almost exactly the same way the production parts will be produced • Parts passed testing with no issues

More Related