1 / 7

Setup Guide Automated Redemption System

Setup Guide Automated Redemption System. Automate GROUPON Redemption. Fast. Real-time. Welcome to the GROUPON family. The package you have received is the GROUPON Automated Redemption System. With this system, you will be able to Electronically redeem GROUPONs right at the point of sale,

phillip-whitfield
Download Presentation

Setup Guide Automated Redemption System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Setup Guide Automated Redemption System

  2. Automate GROUPON Redemption. Fast. Real-time. • Welcome to the GROUPON family. The package you have received is the GROUPON Automated Redemption System. With this system, you will be able to • Electronically redeem GROUPONs right at the point of sale, • Eliminate manual processes, • Expedite payment for redeemed GROUPONS, and • Streamline payments and GROUPON redemption in one easy step. • GETTING STARTED: • Unpack contents • Connect Ethernet cable or Dial Cable • Connect Barcode Reader • Connect Power

  3. 1 Unpack Contents • Please take inventory of the package contents. You will need these for set up. • Contents: • GROUPON Device • RJ45 Ethernet Cable • RJ11 Dial Cable • Barcode Reader and Stand • Power Supply and Cord • Setup Guide

  4. 2a Connect Ethernet cable If you are processing via the Internet: Remove cover from the bottom of device. Plug the RJ-45 connector on one end of the blue cable into the port labeled ETH on the bottom of the device. Plug the RJ-45 connector on the other end of the cable to an open LAN port on the router.

  5. 2 And OR 2b Connect Dial Cable If you will be using dial access either for a primary method of communications or as a backup to the Ethernet connection, you can connect via a phone jack to the GROUPON device. Remove cover from the bottom of device. Plug the RJ-45 connector on one end of the phone line (gray) into the port labeled identified by the telco icon on the bottom of the device. Plug the other end of the phone line into the wall jack.

  6. 3 Connect Barcode Reader The barcode reader must be attached prior to powering up the GROUPON device. Insert the reader’s USB connector into the port identified by the USB icon: . 4 Connect Power Connect the power pin to the terminal and rotate counter-clockwise to lock in place. At this point you should have all necessary cables connected, so you can replace the cover. Now you can apply power to the system by plugging into a power strip. Surge protection is highly recommended. Before twist After twist Example of all cables connected:

  7. 5 Replace cable cover 2 1 Congratulations! You are now ready to process payments and GROUPON redemptions! If at any time in this process you encounter an issue, please call the set up hotline at 1-800-342-9080

More Related