1 / 6

How to Clear a Main Sewer Line Clog

If you are facing the main sewer line clog problem then, fortunately, you may be able to carry out the steps on how to clear a main sewer line clog on your own. The main sewer line then brings all these wastes to either the septic tank or the municipal sewer line.

plumbtimesc
Download Presentation

How to Clear a Main Sewer Line Clog

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Complete Guide to Clear a Main Sewer Line Clog

  2. How to Clear a Main Sewer Line Clog Whenever it comes to main sewer line problems or its Cleaning then we need to remember that main sewer line is a very important part of every home. If you are facing Main sewer line clog problem then fortunately, you may be able to carry out the steps on how to clear a main sewer line clog on your own. The main sewer line then brings all these wastes to either the septic tank or the municipal sewer line. So it have to clear every time because If it is not then you can big problems because of it.

  3. Find the Clean-Out Fitting Yes, this is the first you need to take when you are going to Clean a main sewer line clog. It is a pipe with a width of either 3, 4, or 6 inches and it is also a part of it should be visible above the ground, usually on the lowest floor of a home, or outside, on level ground. The visible section of the fitting is a plug that you should be able to unscrew with a wrench. Locating this clean-out fitting is hard process but if you want to locate it then you need to do work on it

  4. Slowly Loosen the Cover & Buildup Spill Out After find the fitting, you need to se a pipe wrench to loosen its cover first. Don’t pop it completely open, as doing so may lead to any waste buildup exploding out of the opening. You need to make a distance Between yourself and the fitting because you can also Open it from a distance. Secure your footing before removing the cap. All the waste that the main sewer line clog has caused should spill out of the fitting’s opening.

  5. Get Your Plumbing Snake In & Hose Down the Snake and the Fitting Yes, now you need to put your plumbing snake in it but you need to Be sure to follow the tool’s instructions so that you can remove as much of the clog as possible. You need To do for a few times because you should keep hitting dirt inside the pipe. When it comes to wind back the auger then first you need To hose it down with water first while it’s still inside the drain. This will help disintegrate any leftover debris or smaller clogs.

  6. 3513 Delree St West Columbia, SC 29170 Address: (803) 988-9202 Phone: Plumb Time Plumbing & Drain Services Fully South Carolina Licensed, Bonded, Insured https://www.plumbtimesc.com/

More Related