1 / 33

Hardware Development Methods and Tools

Hardware Development Methods and Tools. Design Methodologies Component Variations Misuse Extended TRIZ. Six Sigma. Six Sigma is a revolutionary business process geared toward dramatically reducing organizational inefficiencies that translate into bottom-line profitably. The steps are:

pomona
Download Presentation

Hardware Development Methods and Tools

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Hardware Development Methods and Tools Design Methodologies Component Variations Misuse Extended TRIZ

  2. Six Sigma Six Sigma is a revolutionary business process geared toward dramatically reducing organizational inefficiencies that translate into bottom-line profitably. The steps are: • Define • Measure • Analyze • Improve • Control.

  3. The basis of Six Sigma is measuring and improving processes re: defects • Six Sigma: 3.4 defects per million opportunities • Most current methodologies operate at 3 to 4 sigma, allowing ~ 25% loss of revenue because of failure rates due to defects • Result: unhappy, non-returning customers!

  4. Design for Six Sigma Design for Six Sigma (DFSS) is an approach to designing or re-designing product and/or services to meet or exceed customer requirements and expectations (VOC). It begins by conducting a “gap analysis” of your entire product development system. This analysis finds the gaps in your processes that are negatively affecting new product performance…

  5. Methodology 1: DMADV • Define – determine goals, VOC requirements • Measure – assess customer needs & specs. • Analyze- examine solution options • Design – develop to meet requirements • Verify – verify that you met requirements

  6. Other Methods: • DMADOV – prior + Optimize • IDEAS – Identify/Design/Evaluate/Affirm/Scale up • IDOV – Identify/Design/Optimize/Validate • DMEDI – Define/Measure/Explore/Develop/Implement • DCCDI – Define/Customer/Concepts/Design/Implement

  7. In General, Design for Six Sigma • Is a structured approach to responding to the voice of the customer • Is augmented by standard tools such as QFD, Failure Modes and Effects Analysis, Pareto Charts & analyses, Feather Diagrams, designsafe analyses, input from reliability groups, input from QA and customer complaint inputs, possible analyses from MAUDE data, etc.

  8. Some Six Sigma Tools: • Robust design – Taguchi Method • Quality Function Deployment – QFD (done) • Design Failure Modes and Effects Analysis • Axiomatic Design – Nam Suh

  9. Robust Design By considering the noise factors (variation & component deterioration) and the cost of failure this method helps ensure customer satisfaction. The focus is on improving the fundamental function of the product or process, facilitating flexible designs and concurrent engineering. It assists in reducing product cost, improving quality, while simultaneously reducing development interval.

  10. Your Circuit Choice? • Compensate the customers for their losses. • Screen out circuits having large offset voltage at the end of the production line (discard). • Institute tighter tolerances through process control on the manufacturing line (inspect). • Change the nominal values of critical circuit parameters such that the circuit's function becomes insensitive to the cause, namely, manufacturing variation.

  11. Parameter Diagram, aka P-Diagram

  12. Robust Design – Overview Step 1 Problem Formulation:This step consists of identifying the main function, developing the P-diagram, defining the ideal function and S/N ratio, and planning the experiments. The experiments involve changing the control, noise and signal factors systematically using orthogonal arrays.

  13. Robust Design – Overview Step 2 Data Collection/Simulation:The experiments may be conducted in hardware or through simulation. It is not necessary to have a full-scale model of the product for the purpose of experimentation. It is sufficient and more desirable to have an essential model of the product that adequately captures the design concept. Thus, the experiments can be done more economically.

  14. Robust Design – Overview Step 3 Factor Effects Analysis:The effects of the control factors are calculated in this step and the results are analyzed to select optimum setting of the control factors.

  15. Robust Design – Overview Step 4 Prediction/Confirmation:In order to validate the optimum conditions we predict the performance of the product design under baseline and optimum settings of the control factors. Then we perform confirmation experiments under these conditions and compare the results with the predictions. If the results of confirmation experiments agree with the predictions, then we implement else repeat.

  16. Design for Failure Modes Effect Analysis – Form Data & Process • Number (No.): • Item/Function: • Potential Failure Mode: • Potential Effect(s) of Failure: • Severity (S): • Potential Cause(s)/Mechanism(s) of Failure: • Occurrence (O):

  17. Design for Failure Modes Effect Analysis – Continued • Classification: • Current Mitigations: • Verification: • Detection (D): • Recommended actions: • Action Results:

  18. Axiomatic Design • CTS – “Critical To Satisfaction” (or CR, customer requirements) • FR – Functional Requirements • DP – Design Parameters • PV – Process Variable Matrix based, aim is to develop FR vectors that are independent wrt DPs and result in minimal complexity.

  19. Redundancy • Active redundancy: MTBF = 1/ => 3/2 • Standby redundancy: MTBF = 1/ => 2/ • Active – units are in parallel & always active • Standby – units “swap out” when bad

  20. Component Selection Considerations • Component reliability • Vendor assessment (Hx, failure, etc.) • Vendor audit (check facility) • Vendor evaluation (inspect incoming) • Vendor qualification (on-list?) • Component history • military & reliability groups • government info bases • Safety (FMEA, etc.)

  21. Hardware & Software Techniques ctd. • Component Derating • Practice of limiting the stresses • Use 2 watt R in 1 watt situation, decrease failure rate >30% (T, humidity, P, V, I, friction, vibration) • Usage ratio = max stress/stress rating (.5-.9) • Goal is reliability! • Pacemaker example

  22. Hardware & Software Techniques ctd. • Safety Margin • =(mean safety factor) - 1 =(mean strength/mean stress) - 1 • Elevator – safety margin~2 • Medical devices – Fries - .5 and up. • Load Protection • Environment • Product misuse • Design for variation (6 sigma)

  23. Product misuse: Plan for • excess application of cleaning solutions • physical abuse • spills • excess weight applied to certain parts • excess torque applied to controls or screws • improper voltages, frequencies or pressures • improper or interchangeable electrical or pneumatic connections.

  24. The Clean-Room Approach To Reverse-Engineering: “One person or group takes a device apart and describes what it does in as much detail as possible at a higher level of abstraction than the specific code. That description is then given to another group or person who has absolutely no knowledge of the specific device in question. This second party then builds a new device based on the description. The end result is a new device that works identically to the original but was created without any possibility of specifically copying the original. “ -Mathew Schwartz

  25. Extended TRIZ Design TechniquesExample: Effect of a grounding pad

  26. Problem Statement • Grounding pad is needed in order to conduct current from scalpel to ground • Grounding pad must adhere to the body, otherwise there might be hot spots or burns • Removal of the grounding pad causes injury, as seen in the photo. Injuries may include tearing of the skin, not just what is seen here.

  27. Concept Map for Skin Problem

  28. Ideation Process: Fill in the blanks - • Brief description of the problem … • Problem Formulation … build the diagram:

  29. Formulate … • » 1. Find an alternative way to obtain [the] (conducts electricity well) that does not require [the] (Adheres tightly to skin). • » 2. Consider transitioning to the next generation of the system that will provide [the] (conducts electricity well) in a more effective way and/or will be free of existing problems.

  30. Continued… • » 3. Find an alternative way to obtain [the] (Adheres tightly to skin) that offers the following: provides or enhances [the] (conducts electricity well), does not cause [the] (Tears skin). • » 4. Try to resolve the following contradiction: The useful factor [the] (Adheres tightly to skin) should be in place in order to provide or enhance [the] (conducts electricity well), and should not exist in order to avoid [the] (Tears skin).  • » 5. Find a way to eliminate, reduce, or prevent [the] (Tears skin) under the conditions of [the] (Adheres tightly to skin).

  31. Continued - • Select likely suggestions, • Expand upon • Select solution • …

  32. End of chapter -

More Related