1 / 14

OPTO Link

OPTO Link. using Altera Stratix GX transceiver. Jerzy Zieliński PERG group Warsaw. agenda. Stratix GX Short Introduction Transmission Basic Block Diagram Hardware-Only Based Optical link Internal Interface in Stratix GX FPGA Environment Implementation

pomona
Download Presentation

OPTO Link

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. OPTO Link using Altera Stratix GX transceiver Jerzy Zieliński PERG group Warsaw

  2. agenda • Stratix GX Short Introduction • Transmission Basic Block Diagram • Hardware-Only Based Optical link • Internal Interface in Stratix GX FPGA Environment Implementation • 2.5Gbps optical link, with Matlab based GUI using Internal Interface • Transmission parameters measurement

  3. Altera Stratix GX Introduction • Up to 20 channels for 3.125 Gbps transceiver blocks • Up to 41,250 Logic Elements, 3 Mb RAM and 638 I/O pins • High performance architecture • Build in source-synchronous transfer protocols • Serial light protocol ready

  4. Stratix/Stratix GX Development Board

  5. Transmission Basic Block Diagram

  6. Hardware-Only Couter Test • 8bit Word Basic Transmission • without 8b/10b coding • Errors on Differential Lines • Errors during Transmission • 8bit Word Transmission with 8b/10b coding • No Error in Hardware-Based-Visual-Only Test

  7. Only-Hardware Counter Test

  8. Internal Interface • FPGA Environment • Multi-Protocol External Communication • Command & Status Words • Internal Interface BUS • Internal Interface with Components Communication • Stratix GX OPTO component • Internal Interface Implementation Ready • Full Integration with Internal Interface Communication • Other Components Communication Possible

  9. Internal Interface Inside FPGA

  10. Matlab based GUI Connection Initialization I/O Read Transmission Control Transmission Initialization Bit-Error-Rate Measurement Latency Measurement

  11. Matlab based GUI • 2.5Gbps optical link, with Matlab based Graphical User Interface using Internal Interface • Transmision Initialization • Transmitted Word Control • Bit Error Rate Tests • Latency Measurement • GUI-to-HARDWARE Full Control

  12. Transmission Parameters • Transmission Rate 2.5Gbps • Word Length 8bit • Clock Frequency 156.25MHz • First Transmitted After 200ns • Latency 30 c.c. ~200ns

  13. Future Plans • 16bit Channel Mode • Multi-Channel Transmission Component • Link to Xilinx Virtex II PRO, using the same Transmission Protocol

  14. OPTO Link using Altera Stratix GX transceiver Jerzy Zieliński PERG group Warsaw

More Related