270 likes | 388 Views
Semester 1. 6. JEOPARDY. CHAPTER 6 REVIEW. Presented by: Terren L. Bichard. Ethernet Frames. Ethernet. Collisions. Domains. Errors. 100. 100. 100. 100. 100. 200. 200. 200. 200. 200. 300. 300. 300. 300. 300. 400. 400. 400. 400. 400. 500. 500. 500. 500. 500.
E N D
Semester 1 6 JEOPARDY CHAPTER 6 REVIEW Presented by: Terren L. Bichard
Ethernet Frames Ethernet Collisions Domains Errors 100 100 100 100 100 200 200 200 200 200 300 300 300 300 300 400 400 400 400 400 500 500 500 500 500
Ethernet Frames100 Name the 7 fields in an Ethernet Frame. What are Preamble, Start Frame Delimiter, Distribution Add., Source Add., Length/Type, Data and Pad and Frame Check Sequence.
Ethernet Frames 200 If the value is less than 1536 decimal (0x600 Hex) What is the value is Length?
Ethernet Frames 300 Specifies the upper-layer protocol to receive the data after Ethernet processing is complete. What is the Ethernet Frame “Type” field?
Ethernet Frames 400 The frame structure is nearly identical for all speeds of Ethernet at this layer. What is the Data Link Layer?
Ethernet Frames 500 Length/type field was listed only as _____ in the early IEEE versions and only as _____ in the DIX version. What is length and type?
Ethernet100 Ethernet’s success is a result of it’s: • What is simplicity, ease of maintenance, scalability, reliability and low cost of installation and upgrade?
Ethernet 200 The original idea for Ethernet was developed at…. What is the University of Hawaii?
Ethernet 300 Bandwidth of the network can be increased without changing the underlying Ethernet technology. T/F True
Ethernet 400 The word “base” in 10BaseT means It indicates that baseband signaling is being used?
Ethernet 500 Expressed as 12 hexadecimal digits What is the MAC address?
Collisions100 Slot time is NOT defined for which Ethernet speed? What is 10 Gbps Ethernet?
Collisions200 The MAC sublayer drops the data packet after how many attempts? What is 16 attempts?
Collisions300 Some causes of collisions are… What are extremely heavy network loads or physical problems on the network?
Collisions400 Local, Remote and Late What are three types of collisions?
CollisionsDaily Double The amplitude of the signal greatly increases. What is an indication of a collision?
Domains100 Hosts share the same media. • What is a collision domain?
Domains200 This is divided by Routers or VLANS. What is a broadcast domain?
Domains300 Repeaters increase/decrease the size of a broadcast domain? What is increase?
Domains400 Doing this process greatly reduces the size of the collision domains. What is segmenting the network?
Domains500 Section of a network that is bounded by bridges, routers, or switches. What is a Network Segment?
Errors 100 Long frames What is Jabber?
Errors 200 When a frame is longer than the maximum legal size. What is a long frame?
Errors 300 A short frame with a valid FCS Checksum. What is a runt?
Errors 400 Runts usually refer to these. What are collision fragments?
Errors 500 Energy or noise detected on the cable that appears to be a frame but lacks a valid SFD. What is a ghost error?