New C channel jig (It allows the variable stave width)

Aug 06, 2014

20 likes | 146 Views

New C channel jig (It allows the variable stave width). Gluing gap. New C channel jig exploded view.

Share Presentation

Embed Code

Link

channel jig
gluing gap
new c
variable stave width

quynh

Download Presentation

New C channel jig (It allows the variable stave width)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

New C channel jig (It allows the variable stave width) Gluing gap
New C channel jig exploded view

Using Visual C IDE

What's an IDE? What does it Do?. IDE stands for Integrated Development Environment"It allows you to create and edit a program packageIt allows you to build and compile the packageIt allows you to debug" the packageIt tells you how badly you messed up!. Visual C IDE Components (1). Workspace

232 views • 8 slides

Stave C channel side closeout gluing jig

Stave C channel side closeout gluing jig. S Yang WP4 monthly meeting at Liverpool University 26 th March 2014. C channel gluing jig assembly. Some design feature. Interface to the stave building vacuum jig. Interface to the co-cured face sheet. Main frame.

242 views • 7 slides

WP4 Face to face meeting Stave Core Assembly Status New Thicker Stave

WP4 Face to face meeting Stave Core Assembly Status New Thicker Stave. PS Liverpool 11 th July 2013. Thicker stave to Accommodate Electrical Break. E lectrical break is between the skins in the core Larger hole in the end closeout to accommodate the 3.5mm dia Ti cap

200 views • 7 slides

Stave130 Assembly Jig

Stave130 Assembly Jig. (Tim). Current Tooling. Components CF jig + ‘C’-channel jig & various face-sheet positioning aids It works! Seems to produce nice flat staves What needs to change? Geometry: 13 modules, width, thickness Are there any cosmetic/functional improvements?

155 views • 3 slides

Windmill Lab

Windmill Lab. HOW DOES THE WIDTH OF THE BLADE EFFECT THE LIFTING POWER OF THE WINDMILL?. VARIABLES. Independent Variable: Width of blades Dependent Variable: Mass/ lifting power Constant: Mass, fan, length from fan, material blade is made out of, angle of blade. PROCEDURE.

222 views • 6 slides

BNL Update and Issues

BNL Update and Issues. HV Multiplexing update DC-DC stave width SP Stave PPB replacement Trigger document. D. Lynn, May, 25 2012. HV Multiplexing. Quad HV switching box using commercial SiC JFETs built and tested at BNL. Each channel biased BNL module with no change in ENC and DTN noise.

258 views • 10 slides

Science Must Know Words

Science Must Know Words. Control. Something that is not changed in an experiment; it allows scientist to make comparisons after the experiment. Dependent variable. A variable that depends on the independent variable. Independent variable. A variable that the scientist controls. Evidence.

249 views • 13 slides

Channel Transitions

Channel Transitions. Channel transitions occur where there is a change in width, shape, slope, roughness, bottom elevation of the channel. For changes in slope and roughness we can use backwater curves to evaluate the effects of the changes.

827 views • 10 slides

What were the variables?

What were the variables? . The independent variable was…. The dependent variable was…. The control variable was…. What were the variables?. The independent variable was….width of the polymer strip The dependent variable was….force needed to tear The control variable was….same plastic bag.

350 views • 23 slides

Back up stave test program status

Back up stave test program status. Pre production status Assembling phase comments Geometrical control Stave Qualification Tube pressure tests Tube pressure cycles Stave thermal conduction Stave thermal distortion Stave thermal stability Stave connection Stave insulation

379 views • 21 slides

C# Continued

C# Continued. COMP 205 – Week 10 Chunbo Chu. Method. Local variables. The existence of a local variable is limited to the block in which it is created and the blocks nested within it. It comes into existence at the point at which it is declared.

642 views • 51 slides

English Channel

English Channel. Bodies of Water involved. Atlantic Ocean. North Sea. Countries Involved. France. England. Length and Width. Straight of Dover.

704 views • 11 slides

Stave 130 Geometry

Stave 130 Geometry. Peter Sutcliffe ATLAS Strips WP4 Meeting 26 th March 14 Liverpool. Stave Dimensions – Top view. Critical Dimensions: Overall Length 1277 Width 115 – Taking into Consideration the Bus Tape Width SMC area 100 x 50 EOS at Z=0 to Silicon Edge 0.1mm

276 views • 13 slides

A failed attempt to optimize variable ordering with tools for Constraints Solving

A failed attempt to optimize variable ordering with tools for Constraints Solving. Edmund Clarke Ofer Strichman Carnegie Mellon University. Outline. What is the minimal cut-width problem ? Why is it relevant to verification ? Modeling min cut-width as CSP Experimental results.

283 views • 17 slides

The Jig Borer and Jig Grinder

The Jig Borer and Jig Grinder. Section 13. Jig Borer. Developed primarily to overcome problem of accurately locating and producing holes in precise locations Very important tool before age of computer-controlled machining centers Repeatedly position holes to within 20 millionths of an inch

490 views • 15 slides

Jig Saw Safety Test

Jig Saw Safety Test. Switch. Foot. Blade. Unplug the Jig saw before making any adjustments. Firmly clamp all work before cutting!. Wait until the blade has stopped moving before removing it from a cut. Check the trigger before plugging the saw it. Make sure it is off!.

681 views • 7 slides

Open Channel Hydraulics

Open Channel Hydraulics. Environmental Hydrology Lecture 12. Winooski Falls, Photo by Jim Westphalen. Conditions of flow. In space Uniform flow – no change in velocity, width, depth with distance Non-uniform flow – velocity, width, depth can change ( gradually varying, rapidly varying )

657 views • 20 slides

Programming In C++

Programming In C++. Spring Semester 2013 Lecture 7. Pointers. A variable that holds an address value of the variable is called a pointer variable or simple pointer. Pointer does not have any data type, it only tells the compiler what kind of variable the pointer point to.

388 views • 23 slides

C Miscellaneous Programs Prabhat Kumar Padhy

C Miscellaneous Programs Prabhat Kumar Padhy. 1. C Variable Arguments. Variable length argument is a feature that allows a function to receive any number of arguments. Variable number of arguments are represented by three dotes (…)

89 views • 7 slides

C++ Pointers and Arrays

C++ Pointers and Arrays. CSCD 326. Variable Attributes. Attributes of a “variable”: Contents - the value stored in the memory location(s) used for the variable Address - each byte of memory has a unique address which allows the CPU to access that memory location

520 views • 40 slides

C Structures

C Structures. A first C Program. #include <stdio.h> void main ( void ) { float height, width, area, wood_length ; scanf ( "%f", &height ) ; scanf ( "%f", &width ) ; area = 2 * height * width ; wood_length = 2 * ( height + width ) * 3.25 ;

250 views • 21 slides

The Jig Borer and Jig Grinder

201 views • 15 slides

More Related