1 / 12

Airborne Atmospheric Measurement and Profiling System (AAMPS)

Airborne Atmospheric Measurement and Profiling System (AAMPS). Current P3 Data System. AAMPS Project Goals. Modernize and standardize the data systems on all AOC platforms – minimize dissimilarities. Make it scalable for use in both heavy and light aircraft applications.

raymond-rosario
Download Presentation

Airborne Atmospheric Measurement and Profiling System (AAMPS)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Airborne Atmospheric Measurement and Profiling System (AAMPS)

  2. Current P3 Data System

  3. AAMPS Project Goals • Modernize and standardize the data systems on all AOC platforms – minimize dissimilarities. • Make it scalable for use in both heavy and light aircraft applications. • Simplify routine maintenance, troubleshooting, and project preparations. • Support AOC standard instrumentation, third-party systems, and provide a solid growth path for future hardware and instrumentation. • Use commercially available off-the-shelf (COTS) hardware/software – minimize custom interfaces.

  4. (2) Lockheed Orion (WP-3D) Gulfstream G-IVSP (3) DeHavilland Twin Otter (DHC-6) Cessna Citation II (CE-550) (2) Rockwell Aero Commander (AC-500S) Gulfstream Turbo Commander (AC-690) Lake Seawolf (LA-27) MD-500 Bell 212

  5. Configurable AAMPS Module(CAM) • Real-time data acquisition computer • CompactPCI (6U) • RTLinux RTOS • Utilizes COTS hardware • Standard CAM (4U) and CAM-Lite (1U)

  6. Analog Inputs Up to 96 channels 16-bit resolution (+-)10v input range Up to 1KHz sampling Analog Outputs 4 channels minimum 16-bit DAC 0-10v output 1Hz data rate Synchro-to-Digital 2 channels minimum Course/fine 16-bit resolution 400Hz sampling Parallel Digital Counter/Discretes 32-bit word width TTL CAM I/O

  7. ARINC-429 Rx 2 Rx channels minimum 12.5/100 KHz ARINC-561 Tx 1 Tx channel minimum 11KHz MIL-1553 Bus Controller 2 channels mimimum Synchronous Serial 2 channels mimimum Up to 1Mbps Asynchronous Serial 8 channels mimimum RS-232/422/485 Up to 1Mbps Time Synchronization IRIG-B I/O HaveQuick/RS-422/1-PPS input CAM I/O (Cont’d)

More Related