Carbon Steel and its characteristic

1. Carbon Steel and its characteristic Carbon steel is the main product of the steels that are produced; estimating that 90% of the total production produced to carbon steels and the remaining 10% are alloy steels. These steels are also known as construction steels. The chemical composition of carbon steels is complex, in addition to iron and carbon that generally does not exceed 1%. There other elements which are necessary for their production in the alloy, such as silicon and manganese. The increase in carbon content in steel increases its tensile strength, increases the rate of cold brittleness and reduces toughness and ductility. In addition it should be noted that the carbon content raises the strength of the steel and increases the rate of brittleness to the cold, reducing the toughness and ductility. Based on the amount of carbon they contain, it can be divided into the following categories: Mild steel: It has a carbon percentage of 0.15%, mechanical resistance of 38-48 kg / mm2 and a hardness of 110-135 HB, which makes it easy to handle, weld and deform. Its applications are in materials with cold deformation, elements of machinery of great tenacity, fittings, folded, among others. The applications of this category are pieces of medium strength, drawing, folding, and hardware, among others which can be buy from Alloy Steel Flanges Manufacturers in India. Semi-mild steel: With a carbon percentage it is 0.35%, mechanical resistance of 55- 62 kg / mm2 and a hardness of 150-170 HB. This type of carbon steel from Alloy steel pipe fittings manufacturers in India is used in the elaboration of bolts, screws, resistant parts, machinery elements and more frequently used. Semi-hard steel: Its properties give it a good resistance; however it can be subjected to certain types of deformation. It contains a percentage of 0.45%, resistance of 62-70

2. kg / mm2 and hardness of 280 HB. It can be used for quite resistant parts, transmissions, engine cylinders as well as machinery elements. Hard steel: Its properties are 0.55% carbon percentage, 70-75 kg / mm2 strength and 200-220 HB hardness. Because of these properties it uses in regularly loaded parts, of not very high thicknesses, in transmissions, axles, pensioners, among others. Characteristics of carbon steel Carbon steel from stainless steel pipe fittings manufacturers in India has special characteristics that make it a material of great strength and hardness. Thanks to these properties it is widely used in the construction sector. It is a very little ductile material. It is also more prone to corrosion and less expensive than other materials used for cutting. Depending on the carbon content of steel, it is classified into three types. It may seem very little difference but even the slightest variation can completely change the behaviour of the material. Low carbon steel: It contains less than 0.3% carbon. These are relatively soft and not very resistant, but very ductile and malleable. Medium carbon steel: Contains between 0.3 and 0.5% carbon. They can be heat treated by tempering and tempering to improve mechanical properties. High carbon steel: The latter contains more than 0.5% carbon in its composition. This allows the steel to withstand much more extreme temperatures allowing heat treatments to be applied effectively. Mostly it is used for cutting tools; knives, knives, saw blades, cement bits, pipe cutters, etc. Address:- Mexico Business Phone Number:- 02267436857 Visit My Website:- https://www.redearthsteels.com/