180 likes | 337 Views
Electronic Flight Bags AAP7001.054 Sect 2 Chap 22. SQNLDR Derek Reinhardt Systems Certification and Integrity (SCI) Directorate of Aircraft Engineering (DAIRENG). Overview. EFBs are being used in more challenging and potentially hazardous ways
E N D
Electronic Flight BagsAAP7001.054 Sect 2 Chap 22 SQNLDR Derek Reinhardt Systems Certification and Integrity (SCI) Directorate of Aircraft Engineering (DAIRENG) Electronic Flight Bags
Overview • EFBs are being used in more challenging and potentially hazardous ways • host functions previously only available by dedicated aircraft instrumentation and systems • Increasing imperative to assure EFB systems are of an appropriate integrity for their intended function or application • AND relevant technical and operation considerations are addressed • New - AAP7001.054 Sect 2 Chap 22 Electronic Flight Bags
Scope of Chapter • Provides guidance for the technical approval, service release and management of EFBs on ADF aircraft • Primarily focuses on technical issues • Provides suggestions for operational management where necessary to complement the technical requirements • Based on the FAA approach to EFB approval • number of important differences Electronic Flight Bags
FAA Approach • FAA Documents on EFBs • AC120-76A – Guidelines for the Certification, Airworthiness, and Operational Approval of Electronic Flight Bags Computing Devices • AC20-159 – Obtaining Design and Production Approval of Airport Moving Map Display Applications Intended for Electronic Flight Bag Systems • Defines 3 Types of Software Applications • Type A, Type B, Type C • Defines 3 Classes of EFB Hardware • Class 1, Class 2, Class 3 Electronic Flight Bags
ADF Hardware Classes • Portable EFB Hardware • COTS hardware • considered a portable electronic device (PED) • may be connected to a mounting device, arm mounted, kneepad • designated means of storage when not mounted • connected to aircraft power through a SPO approved power interface, that may be also used to recharge internal batteries • read only data connectivity to other aircraft systems through SPO approved interface • requires quick disconnect from power and data for ground egress • compatible with ejection (if required) • may receive/transmit data connectivity • host Type A and B applications • host Type C applications under special circumstances only • SPO approval for hardware environmental and interface requirements to aircraft, applications and operating system Electronic Flight Bags
ADF Hardware Classes • Integrated EFB Hardware • installed aircraft system • requires design approval and acceptance as per any other flight display or aircraft instrument • must meet relevant aircraft standards • designed and built to a level of integrity commensurate with the system safety assessment findings • host Type C applications – flight displays and moving maps • co-host Type A and B applications • provided specific considerations are addressed Electronic Flight Bags
Software Applications • Type A • pre-composed manuals and procedures, references • forms, logs, training applications • Type B • calculations, charts, electronic checklists (non-interactive with aircraft systems), data services, video • Type C • primary flight displays, secondary flight displays, navigation displays, moving maps, airport moving maps, airborne collision avoidance, cockpit display of traffic information, electronic checklists (interactive with aircraft systems) • Refer to Annex A to the chapter Electronic Flight Bags
Type A Applications • Not required to meet software assurance ‘key issues’ of section 2 chapter 7 • Should be demonstrated to meet their intended function, be sufficiently robust and do not provide confusing or misleading information • As the majority of these applications will be COTS, the intended function and use of these applications on the EFB should be documented, and a verification program (functional and robustness) conducted. • The verification program should pay particular attention to opportunities for confusing or misleading information to be presented. • The verification program should seek to assess the accuracy, availability and timeliness of the EFB applications, and should address the following robustness criteria: • interaction with other applications and the COTS OS hosted on the EFB during worst case loading conditions (memory usage, disk usage, device driver interaction, etc.) should be analysed to determine the acceptability of potential interactions • displayed resolution, legibility, true representation (e.g. correct layout and positioning of document objects and text) and navigation of pre-composed static documents during worst case zoom and resize conditions should be analysed to determine the acceptability of information presentation • any other robustness criteria that the safety assessment determines may contribute to the accuracy, availability, and timeliness of information/functions provided should be analysed Electronic Flight Bags
Type B Applications • Should address the software assurance “Key Issues” identified in Section 2 Chapter 7 • Safety assessment is required to assess the required software assurance level • typically require assurance commensurate to DO-178B Level D • required flight information will be presented for each applicable phase of flight • operating system and hosted applications should be demonstrated to meet their intended function, be sufficiently robust and to not provide confusing or misleading information • Many Type B applications will be based on COTS applications • high level software requirements for the use of these applications on the EFB should be documented • verification program (functional and robustness) • pay particular attention to opportunities for confusing or misleading information to be presented • assess the accuracy, availability and timeliness of the EFB applications • robustness • Type B applications may be hosted on Portable or Integrated EFBs • Loading flight or mission data from a standard Mission Planning System onto the on-board system via the aircraft interface. • should be limited to Integrated EFBs - Portable EFB hardware should only have read-only data connectivity during flight to other aircraft systems through a SPO approved interface • should not include executable code • should ensure that there is a means to establish that the correct information is loaded into the FMS or MC • ensure the correct information has been entered into the MPS prior to upload • portable EFB hardware can be used to load flight or mission data from a MPS prior to flight • provided it can be demonstrated that this mode cannot be exercised during flight Electronic Flight Bags
Type C Applications • Address the software assurance “Key Issues” identified in Section 2 Chapter 7 • Safety assessment - to assess the required software assurance level • typically required assurance commensurate with DO-178B Level C through A • Safety program should ensure that the required flight information can be presented for each applicable phase of flight • Operating system and hosted applications should be demonstrated to meet their intended function, be sufficiently robust and to not provide false or hazardously misleading information • Type C applications are hosted on Integrated EFBs, and Portable EFBs only as specifically only in special circumstances. • Further advice should be sought from DGTA regarding hosting Type C applications on Portable EFBs, as these will be critically assessed on the basis of rigorous system and software safety assessments. Electronic Flight Bags
Co-hosting Type C with Type A & B • Hardware and/or software partitioning should be established • protect Type C applications from Type A and B applications, the COTS computing platform and COTS operating system • containment and mediation, including detection and fault handling • Preferred approach • dual microprocessor system • first microprocessor hosts the COTS OS and Type A and B applications, • second microprocessor hosting an appropriately assured DO-178B Real Time Operating System (RTOS) and Type C applications. • Numerous commercially available EFB systems • Other approaches using software partitioning are also possible, however DGTA should be engaged on any proposal to adopt a software partitioning approach • FAA partial TSO for AMMD software applications Electronic Flight Bags
EFB System Design Considerations • Use of Aircraft Electrical Power Sources • Batteries • Environmental Hazard Identification and Qualification Testing • EFB Mounting Device • Human Machine Interface (HMI) • COTS Operating Systems • Aeronautical Information Databases • Source Documents • Security • Additional System Safety Considerations • EFB Configuration Control • Instructions for Continued Airworthiness Electronic Flight Bags
Operational Considerations • Cockpit procedures, references, emergency checklists, etc. are typically developed during the initial development and certification of an aircraft, and in support of subsequent modifications. • Many implicit relationships to assumptions (e.g. availability, accuracy, and completeness of information) made in the system safety program accompanying aircraft development and/or modification • vital that they are captured • Operations Issues • training, human factors (HMI and workload), currency, procedures • Procedures Electronic Flight Bags
Transitioning to Paperless Cockpit • Operational Evaluation • minimum 6 month operational evaluation is recommended • SPO Obligations • all system safety assumptions (availability, accuracy, completeness) associated with all paper-based procedures and references used in the cockpit are identified and addressed by their EFB replacement • the design supports the required availability, accuracy and completeness of information • separate and backup power sources as necessary are provided to meet safety objectives • multiple redundant and/or diverse EFBs are provided to mitigate sources of common mode failures • factors relating to employment in single versus multi-crew aircraft, associated workload and availability of information have been assessed • if required as a mitigation for potential design related failure conditions, that paper products are carried by selected aircrew members, or a complete set of sealed paper backups stored within reach of the cockpit Electronic Flight Bags
Managing Deficiencies Against EFB Design Requirements • Issue Paper is the preferred means • an ADF application does not neatly fall into the defined application types • an ADF application does not meet the relevant software safety and assurance requirements for its type, but the OAA considers the improvement in operational safety or capability to be worth retaining the residual risk • any other circumstances where technical shortcomings of the EFB system against the criteria of this chapter require operational mitigations (usually procedures) to retain an acceptable level of safety • TAA’s firm expectation is that ADF engineers will strive to achieve the benchmark level of safety widely accepted in the civilian domain. • Only where significant technical issues or an urgent operational imperative prevent full compliance with the requirements of this chapter, will the TAA propose to the OAA that a lesser level of safety be accepted. • factors such as rapid acquisition and cost, would not normally be considered adequate justification for short cuts in engineering rigour Electronic Flight Bags
Summary • Provides guidance for the technical approval, service release and management of EFBs on ADF aircraft • Primarily focuses on technical issues • Provides suggestions for operational management where necessary to complement the technical requirements • Released ready for use – 054 amendment coming soon Electronic Flight Bags
Questions ? Electronic Flight Bags