1 / 19

BLUETHOOTH ARCHITECTURE

BLUETHOOTH ARCHITECTURE. Olena Hunsicker CS 555. WHAT IS BLUETOOTH WIRELESS TECHNOLOGY?. Bluetooth wireless technology is a short-range communications technology intended to replace the cables connecting portable and/or fixed devices while maintaining high security level.

renee-donaldson
Download Presentation

BLUETHOOTH ARCHITECTURE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BLUETHOOTH ARCHITECTURE Olena Hunsicker CS 555

  2. WHAT IS BLUETOOTH WIRELESS TECHNOLOGY? Bluetooth wireless technology is a short-range communications technology intended to replace the cables connecting portable and/or fixed devices while maintaining high security level. The key features of Bluetooth technology are: • Robustness • low power • low cost

  3. BLUETOOTH IS GLOBAL • One version for the world • Bluetooth technology operates in the unlicensed industrial, scientific and medical (ISM) band at 2.4 to 2.485 GHz. • The 2.4 GHz ISM band is available and unlicensed in most countries.

  4. BLUETOOTH TECHNOLOGY USE Landline Cable Replacement Data/Voice Access Points Personal Ad-hoc Networks

  5. Applications TCP/IP HID RFCOMM Data Control Audio L2CAP LMP Link Manager Baseband RF BLUETOOTH PROTOCOL ARCHITECTURE Application Framework and Support Host Controller Interface Link Manager and L2CAP Radio & Baseband

  6. Software Applications TCP/IP HID RFCOMM Data Control Audio L2CAP LMP Link Manager Baseband RF BLUETOOTH STRUCTURE Link Control Hardware

  7. Link Control Hardware Duties: • radio transmission and reception • digital signal processing • establishing connection • support for asynchronous (data) && synchronous (voice) links • error correction • authentication • provide Host Controller Interface as a standard interface for software

  8. Radio Layer (RF) • Operates in the unlicensed ISM (industrial, scientific, medical) band at 2.4 GHz • Responsible for transmitting and receiving packets of information on the physical channel • Transforms a stream of data to and from the physical channel into required formats. • Support data rate: 1Mbps (Basic Rate) / 3 Mbps (Enhanced Data Rate) • Bluetooth hops 1600 times/sec (uses frequency only for 625 microsecond) in order to avoid interference with other devices (frequency-hopping spread spectrum (FHSS)). Baseband RF

  9. Network Topology • Piconet • Master can connect to 7 simultaneous active slaves per piconet • Scatternet • High capacity system • Minimal impact with up to 10 piconets within range S P M M sb P S sb P S S

  10. The scatternet

  11. Baseband Layer • Provide transmission channels for voice and data • Synchronousconnection-oriented (SCO) links - used for voice transmission. • Slave device is always allowed to respond during the time-slot immediately following a SCO transmission from the master • No retransmission allowed • Asynchronous connectionless (ACL) links -used for data transmission. • After an ACL transmission from the master, only the addressed slave device may respond during the next time-slot, or if no device is addressed, the packet is considered a broadcast message. • Packet retransmission allowed.

  12. Frame Frame f f f f k k+1 k k+1 Master Master One One Slave Slave Slot Sot Packet Packet 625 us 625 us One Slot One Slot Basic Baseband Protocol • Spread spectrum frequency hopping radio • 79 or 23* one MHz channels (*country dependent) • Hops every packet • Packets are 1, 3, or 5 slots long • Frame consists of two packets • Transmit followed by receive • Nominally hops at 1600 times a second (1 slot packets)

  13. Baseband RF Baseband Layer • Single-slave communication (one slave in piconet): • Time divided into slots 625 msec • Master uses even-numbered slots, slave – odd-numbered • Multiple-slave communication (more than one slave in the piconet) • Master uses even-numbered slots • Slaves use odd-numbered slots if they have packet to send, or stay silent if none. • All slaves listen on even-numbered slots

  14. Audio L2CAP LMP Link Manager Baseband RF Link Manager • Link Manager duties: • Controls baseband state • Authentication and security services • QoS monitoring • Change slaves modes • Handling changes in master/slave roles • Communicate with each other using link management protocol (LMP)

  15. TCP/IP HID RFCOMM Control Data Audio L2CAP Link Manager Baseband RF L2CAP • The lowest layer of software protocols • Provide service for upper level protocols transmitting data over L2CAP channels • The L2CAP Specification is defined for only ACL links and no support for SCO links. • Logical link control and Adoption Protocol (LL=2L) Applications

  16. HOW TO ESTABLISH CONNECTION • The inquiry procedure enables a device to discover which devices are in range, and determine the addresses and clocks for the devices. (baseband layer). • Send out inquiry packets and then receiving the inquiry reply. inquiry packets inquiry reply

  17. HOW TO ESTABLISH CONNECTION (cont) 2. Paging : Paging procedure synchronize the device with access point (baseband layer). 3. Establish a link : LMP establish a link with access point 4. Discover services : LMP uses Service Discovery Protocol (SDP) to find which services are available. 5. Create L2CAP channel: LMP create L2CAP channel to access point/or can use RFCOMM (Radio Frequency protocol) to simulate serial line. 6. Authentication: input from the user. Authentication request -> PIN -> encryption -> Authentication reply. 7. Log in : if use PPP over RFCOMM – serial port is emulated, then log in 8. Send and Receive: use TSP/IP

  18. References: • R. Spaker, “ Bluetooth Basics” http://www.embedded.com/2000/0007/0007ia1.htm • Joe Decuir “Bluetooth™ Wireless System” • http://www.bluetooth.com/Bluetooth/

  19. THANK YOU!

More Related