1 / 11

Electronic Instrumentation & PLC DKT 314

Electronic Instrumentation & PLC DKT 314. Digital thermometer LCD display using LM35 Lecturer: En Mat Nor Mohamad B Ismail En Zulkifli Husin. SYNOPSIS. Digital thermometer designed for measuring temperature in three scales (Fahrenheit Celsius and Kelvin )

renee-donaldson
Download Presentation

Electronic Instrumentation & PLC DKT 314

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Electronic Instrumentation & PLCDKT 314 Digital thermometer LCD display using LM35 Lecturer: En Mat Nor Mohamad B Ismail En Zulkifli Husin

  2. SYNOPSIS • Digital thermometer designed for measuring temperature in three scales (Fahrenheit Celsius and Kelvin ) • Temperature was measured by LM35DZ • The 0804 analog to digital converter (ADC), convert the dc output provided by LM35D and sends to microcontroller (AT89S52) • The program write in C language • Microcontroller read binary output from the A/D converter, performs ASCII code, and sends to a 16x2 line LCD display

  3. OBJECTIVE • Ability to apply the basic concept of electronic instrumentation • Ability to under stand the basic concept of electronic instrumentation • Ability to integrate basic sensor temperature circuit and LCD display with 8051

  4. BLOG DIAGRAM LM35 FILTER AMP ADC 8051 Display

  5. PART 1 –LM35 Voltage increase 10mV/ ⁰C supply voltage 5V

  6. PART 2- FILTER LOW PASSFILTER Vout=1/2∏RC R=100kΩ,C=0.002mF Vout=795.77Hz

  7. PART 3- AMPLIFIER Gain = 1+(R2/R1) R1=10kΩ,R2=10Ω Gain= 1.001

  8. PART 4 –ADC 0804 Vref=not connected Step size=19.53mV Vout= Vin/ Step size

  9. Full Schematic Diagram

  10. PROBLEMS • Amplifier – the theoretical not equal to practical amplifier • Uneasy to stable the temperature value. • To find the best filter for the project.

  11. CONCLUTION • Objective for this project has archive. • Learn the basic of electronic instrumentation • This project can control anything that use this system.

More Related