1 / 6

QARTOD 2: Remote Currents Working Group Definitions: Level 1 – refers to radials

QARTOD 2: Remote Currents Working Group Definitions: Level 1 – refers to radials Level 2 – refers to total vectors Level 3 – refers to higher level data products. Question 1: What real-time quality control tests should be applied? Data evaluation parameters: Level 1

rex
Download Presentation

QARTOD 2: Remote Currents Working Group Definitions: Level 1 – refers to radials

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. QARTOD 2: Remote Currents Working Group Definitions: Level 1 – refers to radials Level 2 – refers to total vectors Level 3 – refers to higher level data products

  2. Question 1: What real-time quality control tests should be applied? Data evaluation parameters: Level 1 - signal to noise (s/n) - criteria to define 1st order peak (direction finding systems) - single or dual angle solution - sector-to-sector change in radial speed - standard deviation and number of vectors within each sector - eigenvalues for each vector (MUSIC specific) - % coverage for given time window - establish parameters for other equipment (e.g. radars) and processing methods Level 2 - radial misfit error (rms difference from back-calculating the radials) - GDOP - Geometric Dilution of Precision - thresholds - number of radials and which sites contribute radials to total vector - % coverage at grid points over given time interval

  3. Question 2: What categories of real-time quality descriptor flags should be required? - flag interpolated data (radial or total) - categories from QARTOD 1 are appropriate with potential additions (e.g. interpolated)

  4. Question 3: What real time metadata descriptors should be required? Level 1 - site location - hardware parameters (e.g. transmit frequency, range resolution, etc.) - software parameters (e.g. version no., averaging time, etc.) - antenna patterns and time of measurement - operating institution - equipment environmental parameters - data units Level 2 - number/identification of possible sites contributing radials to total vectors - parameters used for combining (e.g. averaging time, averaging area) - institution that conducted combining - grid parameters (e.g. spacing, domain) - data units

  5. Question 4: What real-time calibration flags should be required? - baseline consistency checks (2 sites) - total/radial consistency checks (3+ sites) - antenna amplitude and phase measured between sites - forward and reflected power - diagnostics (e.g. transmitter temperature sensor) - sea echo for phase determination and amplitude Question 5: What common data formats should be required? - NetCDF - ASCII (lat, lon, u, v) Question 6: Additional requirements associated with DMAC? - cross-walk between metadata provided in NetCDF and FGDC-compliant metadata

  6. Question 7: Next Steps and roadblocks to implementation of QA/QC? Need to: - establish consistency of QA/QC throughout national network; - develop data dictionary and establish timeline - define data parameters for manufacturers to deliver (developed from QARTOD2 and ROWG) - develop “best practices” procedures for new operators - discussion to be continued…

More Related