Heat 14 (01 of 32)

1. Heat Physics Lecture Notes Heat 14 (01 of 32)

2. Heat 1) Heat As Energy Transfer 2) Internal Energy 3) Specific Heat 4) Calorimetry 5) Latent Heat 6) Heat Transfer: Conduction Heat 14 (02 of 32)

3. Heat As Energy Transfer Heat is random thermal Energy Unit of heat: calorie (cal) 1 cal is the amount of heat necessary to raise the temperature of 1 g of water by 1 Celsius degree. 1 kcal is the amount of heat necessary to raise the temperature of 1 kg of water by 1 Celsius degree. Heat 14 (13 of 32)

4. The apparatus below is used to determine the mechanical equivalent of heat: Heat As Energy Transfer Heat is a form of energy and can be equated to mechanical energy. Heat 14 (13 of 32)

5. Heat As Energy Transfer Definition of heat: Heat is thermal energy transferred from one object to another because of a difference in temperature. The sum total of all the energy of all the molecules in a substance is its internal (or thermal) energy. Temperature: measures molecules’ average kinetic energy Internal energy: total energy of all molecules Heat: transfer of energy due to difference in temperature Heat 14 (13 of 32)

6. (c) Specific heat of the material (Q) Thermal energy added (DT) Change in temperature (m) Mass of the object Heat As Energy Transfer m Heat 14 (13 of 32)

7. Chapter 14 Page 387 Heat 14 (13 of 32)

8. Heat As Energy Transfer Problem: A 50 g piece of cadmium is at 20 oC. If 400 J of heat is added to the cadmium, what is its final temperature Heat 14 (13 of 32)

9. Heat As Energy Transfer Problem: A 100 g lead bullet traveling at 300 m/s is stopped by a large tree. Half the kinetic energy of the bullet is transformed into heat energy and remains with the the bullet while the other half is transmitted to the tree. What is the increase in temperature of the bullet? Heat 14 (13 of 32)

10. Heat As Energy Transfer Problem: A 3.0 kg block of iron is dropped from rest from the top of a cliff. When the block hits the ground it is observed that its temperature increases by 0.50 oC. Assume that all the potential energy is used to heat the block. How high is the cliff? Heat 14 (13 of 32)

11. Heat As Energy Transfer Problem: A 1.5 kg copper block is given an initial speed of 30 m/s on a rough horizontal surface Because of friction, the block finally comes to rest. If the block absorbs 85% of its initial kinetic energy in the form of heat, Calculate its increase in temperature? Heat 14 (13 of 32)

12. Calorimetry Problem: A 0.40 kg iron horseshoe that is initially at 500 oC is dropped into a bucket containing 20 kg of water at 22 oC. What is the final equilibrium temperature? Neglect any heat transfer to for from the surroundings. Heat 14 (13 of 32)

13. Calorimetry Problem: A 200 g block of copper at a temperature of 90 oC is dropped into 400 g of water at 27 oC. The water is contained in a 300 g glass container. What is the final temperature of the mixture Heat 14 (13 of 32)

14. Mug massmm = 0.500 kg Coffee massmc = 0.200 kg Initial temperature of coffee and mug:t0 = 200C Final temperature of coffee and mug:tf = 960C Total heat to raise temperature of coffee (water) and mug to 960C. Example 1:A500-g copper coffee mug is filled with 200-g of coffee. How much heat was required to heat cup and coffee from 20 to 960C? 1. Draw sketch of problem. 2. List given information. 3. List what is to be found:

15. Heat Gain or Loss: Q = mc Dt Copper: cm = 390 J/kg C0 Coffee (water): cw = 4186 J/kg C0 Example 1(Cont.):How much heat needed to heat cup and coffee from 20 to 960C?mm = 0.2 kg; mw = 0.5 kg. 4. Recall applicable formula or law: 5. Decide that TOTAL heat is that required to raise temperature of mug and water (coffee). Write equation. QT =mmcmDt + mwcw Dt 6. Look up specific heats in tables:

16. QT =mmcmDt + mwcw Dt Copper: cm = 390 J/kg C0 Coffee (water): cw = 4186 J/kg C0 Example 1(Cont.):How much heat needed to heat cup and coffee from 20 to 960C?mc = 0.2 kg; mw = 0.5 kg. 7. Substitute info / solve problem: Water: (0.20 kg)(4186 J/kgC0)(76 C0) Dt = 960C - 200C = 76 C0 Cup: (0.50 kg)(390 J/kgC0)(76 C0) QT = 78.4 kJ QT= 63,600 J + 14,800 J

17. Calorimetry m1 m2 TH TL Conservation of thermal energy: Final Temperature: Heat 14 (13 of 32)

18. (m) Mass of the object (L) Latent heat of the fusion or vaporization (Q) Thermal energy added Latent Heat - Stored / Hidden Energy is required for a material to change phase, Even though its temperature is not changing. Heat 14 (13 of 32)

19. The water problem

20. Table of latent heats The following table shows the latent heats and change of phase temperatures of some common fluids and gases.

21. Latent Heat Heat of fusion, Lf: heat required to change 1.0 kg of material from solid to liquid Heat of vaporization, Lv: heat required to change 1.0kg of material from liquid to vapor Chapter 14 - Page 392 Heat 14 (13 of 32)

22. Latent Heat Q2= mLf Q4= mLv 3.33 x 105 J 22.6 x 105 J 1 kg Ice -50 oC 150 100 50 0 -50 Q1= mcIDt Q3= mcWDt Q5= mcSDt 1.05 x 105 J 4.19 x 105 J 1.01 x 105 J Heat 14 (13 of 32)

23. Latent Heat Heat required to convert 1 kg of ice at -50 oC to steam at 150 oC Q1 = 1.05 x 105 J Q2 = 3.33 x 105 J Q3 = 4.19 x 105 J Q4 = 22.6 x 105 J Q5 = 1.01 x 105 J 3.22 x 106 J Heat 14 (13 of 32)

24. Latent Heat Problem: A large block of ice at 0 oC has a hole chipped in it, and 400 g of aluminum pellets at a temperature of 30 oC are poured into the hole. How much of the ice melts? Heat 14 (13 of 32)

25. Conduction x Heat conduction can be visualized as occurring through molecular collisions. The heat flow per unit time is given by: Heat 14 (13 of 32)

26. Conduction Chapter 14 Page 396 The constant k is called the thermal conductivity. Materials with large k are called conductors; those with small k are called insulators. Heat 14 (13 of 32)

27. Conduction Problem: A window has a glass surface of 1.6 x 103 cm2 and a thickness of 3.0 mm. Find the rate of heat transfer by conduction through this pane when the temperature of the inside surface of the glass is 20 oC and the outside temperature is 40 oC. Heat 14 (13 of 32)

28. Conduction Problem: A glass window pane has an area of 3.0 m2 and a thickness of 0.60 cm. If the temperature difference between its faces is 25 oC, how much heat flows through the window per hour? Heat 14 (13 of 32)

29. Conduction Chapter 14 Page 397 Building materials are measured using R−values rather than thermal conductivity: Where, L is the thickness of the material. Heat 14 (13 of 32)

30. Summary Internal energy U refers to the total energy of all molecules in an object. For an ideal monatomic gas, Heat is the transfer of energy from one object to another due to a temperature difference. Heat can be measured in joules or in calories. Specific heat of a substance is the energy required to change the temperature of a fixed amount of matter by 1° C. Heat 14 (13 of 32)

31. Summary In an isolated system, heat gained by one part of the system must be lost by another. Calorimetry measures heat exchange quantitatively. Energy in involved in phase changes even though the temperature does not change. Heat of fusion: amount of energy required to melt 1 kg of material. Heat of vaporization: amount of energy required to change 1 kg of material from liquid to vapor. Heat 14 (13 of 32)

32. Summary Heat transfer takes place by conduction, convection, and radiation. In conduction, energy is transferred through the collisions of molecules in the substance. Heat 14 (13 of 32)

33. Internal energy of an ideal (monatomic) gas: kinetic energy in terms of the temperature Internal Energy Heat 14 (13 of 32)

34. END