1 / 13

There are no FREE lunches

There are no FREE lunches. Anti-reflective coating. A anti-reflective coating is deposited on the top side to help transmit more of the incident sunlight.

riley-baldwin
Download Presentation

There are no FREE lunches

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. There are no FREE lunches

  2. Anti-reflective coating A anti-reflective coating is deposited on the top side to help transmit more of the incident sunlight

  3. Because the top side conductor has been already fabricated and only low temperature process can be used, the typical process to deposit anti-reflective coating is PECVD

  4. PECVD Plasma Enhanced Chemical Vapor Deposition PECVD is used extensively in the manufacture of microelectronic devices because it allows for lower temperature processes

  5. Just like in sputtering, a plasma is formed in an electric field The plasma allows for the deposition or growth of films at lower temperature than would normally be required in just a CVD process

  6. Trion ORION III PECVD tool

  7. Typical PECVD Process The wafer is loaded in into the vacuum chamber The chamber is pumped to vacuum conditions The wafer is heated to deposition temperatures (300oC typical) Gas are introduced that will acts as precursors to the film growth

  8. Typical PECVD Process (continued) Chamber pressure is regulated to provide an equilibrium pressure ( gas in, pumping out) RF power is applied to the chamber creating a plasma A film is grown based on the gases introduced

  9. For our solar cell We will be using SiO2 as the antireflective coating There are better anti-reflective coatings but not available in the Cameron clean room such as SiN or ITO

  10. Trion ORION III PECVDChamber lid open Heated substrate stage Can accommodate up to 8” wafers

  11. Trion ORION III water chiller and dry (no oil) chemical vacuum pump

  12. Trion ORION III process gas cabinet TEOS (tetraethylorthosilicon) SiO2 precursor

  13. The blue tint to the solar cell is the anti-reflective coating

More Related