1 / 6

Microcontroller kit

Microcontroller kit contains AVR Controller Board, AVR/8051 USB Programmer, 16X2 LCD, EEPROM 24C08 (IC), Temperature Sensor, F/F Jumper Wire etc.

robomart
Download Presentation

Microcontroller kit

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MICROCONTROLLER KIT

  2. PARTS OF MICROCONTROLLER KIT • 1X EEPROM 24C08(IC) • Temperature Sensor • HC-04 Ultrasonic Sensor • USB to TTL • 1x Sound Sensor • PIR Motion Detection Sensor HC-SR501 • AVR Controller Board

  3. Micrcontroller kit is a complete starter kit and development system for the AVR Atmega16/32/8535 microcontrollers from ATMEL ® Corporation. It is designed to give designers a quick start to develop code on the AVR. This kit is an easy and low cost way to get started with microcontrollers. Included on board is an Atmega16/32/8535 microcontroller, external crystal with supporting capacitors, AVCC filter parts, Power supply parts and more.  The Controller used is an 8-bit microcontroller.

  4. The AVR Atmega board has 32 I/O lines, one programmable full duplex USART, 4 PWM channels and 8 channel 10-bit ADC Converter. The board create a perfect platform for operating dual 8-bit Timers each having separate prescalers and compare modes. Additionally, a single 16-bit timer with a separate prescaler, compare and capture mode can be used. The Atmega16/32 is a feature packed and very versatile microcontroller. The board takes Input which can be either Analog or Digital in nature. On board we have PIN extensions of all the parallel I/O line available with the micro controller to make the peripherals plug n play.

  5. One L293D ICs are also available in Atmega-16/32 development board to run 2 dc motors simultaneously also one ULN2803/2003 stepper motor driver. There is 1 DB-9 female connecter also mounted on board for PC connection. There is one 16 pins LCD connector(female) also available. There  are four PWM channels also available by which we can control stepper/servo motors. Master/Slave SPI serial interface availability make use of USBASP programmer to flash program in controller.8 keypad switch and pattern of 8 different led’s are also available on Atmega-16 board. There are  two different option to provide power supply (DC battery/adapter)to the development board. It also has 4 Interrupt switches to create interrupts.

  6. Thanks C4/100, C-Block, Above IOB Bank, Sec-31,  Noida-201301(UP) India

More Related