1 / 27

Virtual Links: VLANs and Tunneling

Virtual Links: VLANs and Tunneling. CS 4251: Computer Networking II Nick Feamster Spring 2008. Why VLANs?. Layer 2: devices on one VLAN cannot communicate with users on another VLAN without the use of routers and network layer addresses Advantages

rocco
Download Presentation

Virtual Links: VLANs and Tunneling

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Virtual Links: VLANs and Tunneling CS 4251: Computer Networking IINick FeamsterSpring 2008

  2. Why VLANs? • Layer 2: devices on one VLAN cannot communicate with users on another VLAN without the use of routers and network layer addresses • Advantages • Help control broadcasts (primarily MAC-layer broadcasts) • Switch table entry scaling • Improve network security • Help logically group network users • Key feature: Divorced from physical network topology

  3. VLAN basics • VLAN configuration issues: • A switch creates a broadcast domain • VLANs help manage broadcast domains • VLANs can be defined on port groups, users or protocols • LAN switches and network management software provide a mechanism to create VLANs • VLANs help control the size of broadcast domains and localize traffic. • VLANs are associated with individual networks. • Devices in different VLANs cannot directly communicate without the intervention of a Layer 3 routing device.

  4. VLAN Trunking Protocol • VLAN trunking: many VLANs throughout an organization by adding special tags to frames to identify the VLAN to which they belong. • This tagging allows many VLANs to be carried across a common backbone, or trunk. • IEEE 802.1Q trunking protocol is the standard, widely implemented trunking protocol

  5. Trunking: History • An example of this in a communications network is a backbone link between an MDF and an IDF • A backbone is composed of a number of trunks.

  6. VLAN Trunking • Conserve ports when creating a link between two devices implementing VLANs • Trunking will bundle multiple virtual links over one physical link by allowing the traffic for several VLANs to travel over a single cable between the switches.

  7. Trunking Operation • Manages the transfer of frames from different VLANs on a single physical line • Trunking protocols establish agreement for the distribution of frames to the associated ports at both ends of the trunk • Two mechanisms • frame filtering • frame tagging

  8. Frame Filtering

  9. Frame Tagging • A frame tagging mechanism assigns an identifier, VLAN ID, to the frames • Easier management • Faster delivery of frames

  10. Frame Tagging • Each frame sent on the link is tagged to identify which VLAN it belongs to. • Different tagging schemes exist • Two common schemes for Ethernet frames • 802.1Q:IEEE standard • Encapsulates packet in an additional 4-byte header • ISL –Cisco proprietary Inter-Switch Link protocol • Tagging occurs within the frame itself

  11. VLANs and trunking • VLAN frame tagging is an approach that has been specifically developed for switched communications. • Frame tagging places a unique identifier in the header of each frame as it is forwarded throughout the network backbone. • The identifier is understood and examined by each switch before any broadcasts or transmissions are made to other switches, routers, or end-station devices. • When the frame exits the network backbone, the switch removes the identifier before the frame is transmitted to the target end station. • Frame tagging functions at Layer 2 and requires little processing or administrative overhead.

  12. Inter-VLAN Routing • If a VLAN spans across multiple devices a trunk is used to interconnect the devices. • A trunk carries traffic for multiple VLANs. • For example, a trunk can connect a switch to another switch, a switch to the inter-VLAN router, or a switch to a server with a special NIC installed that supports trunking. • Remember that when a host on one VLAN wants to communicate with a host on another, a router must be involved.

  13. Inter-VLAN Issues and Solutions • Hosts on different VLANs must communicate • Logical connectivity: a single connection, or trunk, from the switch to the router • That trunk can support multiple VLANs • This topology is called a router on a stick because there is a single connection to the router

  14. Physical and logical interfaces • The primary advantage of using a trunk link is a reduction in the number of router and switch ports used. • Not only can this save money, it can also reduce configuration complexity. • Consequently, the trunk-connected router approach can scale to a much larger number of VLANs than a one-link-per-VLAN design.

  15. Why Tunnel? • Security • E.g., VPNs • Flexibility • Topology • Protocol • Bypassing local network engineers • Oppressive regimes: China, Pakistan, TS… • Compatibility/Interoperability • Dispersion/Logical grouping/Organization • Reliability • Fast Reroute, Resilient Overlay Networks (Akamai SureRoute) • Stability (“path pinning”) • E.g., for performance guarantees

  16. MPLS Overview • Main idea: Virtual circuit • Packets forwarded based only on circuit identifier Source 1 Destination Source 2 Router can forward traffic to the same destination on different interfaces/paths.

  17. Circuit Abstraction: Label Swapping D • Label-switched paths (LSPs): Paths are “named” by the label at the path’s entry point • At each hop, label determines: • Outgoing interface • New label to attach • Label distribution protocol: responsible for disseminating signalling information 2 A 1 Tag Out New 3 A 2 D

  18. Layer 3 Virtual Private Networks • Private communications over a public network • A set of sites that are allowed to communicate with each other • Defined by a set of administrative policies • determine both connectivity and QoS among sites • established by VPN customers • One way to implement: BGP/MPLS VPN mechanisms (RFC 2547)

  19. Building Private Networks • Separate physical network • Good security properties • Expensive! • Secure VPNs • Encryption of entire network stack between endpoints • Layer 2 Tunneling Protocol (L2TP) • “PPP over IP” • No encryption • Layer 3 VPNs Privacy and interconnectivity (not confidentiality, integrity, etc.)

  20. Layer 2 vs. Layer 3 VPNs • Layer 2 VPNs can carry traffic for many different protocols, whereas Layer 3 is “IP only” • More complicated to provision a Layer 2 VPN • Layer 3 VPNs: potentially more flexibility, fewer configuration headaches

  21. VPN A/Site 2 10.2/16 VPN B/Site 1 10.2/16 CEA2 CE1B1 10.1/16 CEB2 VPN B/Site 2 P1 PE2 CE2B1 P2 PE1 PE3 CEA3 CEA1 P3 10.3/16 CEB3 10.1/16 VPN A/Site 3 10.4/16 VPN A/Site 1 VPN B/Site 3 Layer 3 BGP/MPLS VPNs • Isolation: Multiple logical networks over a single, shared physical infrastructure • Tunneling:Keeping routes out of the core BGP to exchange routes MPLS to forward traffic

  22. High-Level Overview of Operation • IP packets arrive at PE • Destination IP address is looked up in forwarding table • Datagram sent to customer’s network using tunneling (i.e., an MPLS label-switched path)

  23. BGP/MPLS VPN key components • Forwarding in the core:MPLS • Distributing routes between PEs:BGP • Isolation:Keeping different VPNs from routing traffic over one another • Constrained distribution of routing information • Multiple “virtual” forwarding tables • Unique addresses: VPN-IP4 Address extension

  24. Virtual Routing and Forwarding • Separate tables per customer at each router Customer 1 10.0.1.0/24 10.0.1.0/24RD: Green Customer 1 Customer 2 10.0.1.0/24 Customer 2 10.0.1.0/24RD: Blue

  25. Site 2 Site 1 Site 3 Routing: Constraining Distribution • Performed by Service Provider using route filtering based on BGP Extended Community attribute • BGP Community is attached by ingress PE route filtering based on BGP Community is performed by egress PE BGP Static route, RIP, etc. RD:10.0.1.0/24Route target: GreenNext-hop: A A 10.0.1.0/24

  26. Forwarding • PE and P routers have BGP next-hop reachability through the backbone IGP • Labels are distributed through LDP (hop-by-hop) corresponding to BGP Next-Hops • Two-Label Stack is used for packet forwarding • Top label indicates Next-Hop (interior label) • Second level label indicates outgoing interface or VRF (exterior label) Corresponds to VRF/interface at exit Corresponds to LSP ofBGP next-hop (PE) Layer 2 Header Label1 Label2 IP Datagram

  27. Forwarding in BGP/MPLS VPNs • Step 1: Packet arrives at incoming interface • Site VRF determines BGP next-hop and Label #2 Label2 IP Datagram • Step 2: BGP next-hop lookup, add corresponding LSP (also at site VRF) Label1 Label2 IP Datagram

More Related