1 / 15

Workshop 6.1 Steady State Thermal Analysis

Workshop 6.1 Steady State Thermal Analysis. Workshop 6.1 - Goals. In this workshop we will analyze the pump housing shown below for its heat transfer characteristics. Specifically a plastic and an aluminum version of the housing will be analyzed using the same boundary conditions.

rodd
Download Presentation

Workshop 6.1 Steady State Thermal Analysis

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Workshop 6.1Steady State Thermal Analysis

  2. Workshop 6.1 - Goals In this workshop we will analyze the pump housing shown below for its heat transfer characteristics. Specifically a plastic and an aluminum version of the housing will be analyzed using the same boundary conditions. Our goal is to compare the thermal results for each configuration.

  3. Workshop 6.1 - Assumptions Assumptions: The pump housing is mounted to a pump which is held at a constant 60 °C. We assume the mating face on the pump is also held at this temperature. The interior surfaces of the pump are held at a constant temperature of 90 °C by the fluid. The exterior surfaces are modeled using a simplified convection correlation for stagnant air at 20 °C.

  4. Workshop 6.1 – Project Schematic • Open the Project page. • From the Units menu verify: • Project units are set to “Metric (kg, mm, s, C, mA, mV). • “Display Values in Project Units” is checked (on).

  5. … Workshop 6.1 – Project Schematic • From the Toolbox, double click “Steady-State Thermal” to create a new Steady State Thermal system. • RMB the Geometry cell and “Import Geometry” – browse to the file: “Pump_housing.x_t” 1. 2.

  6. … Workshop 6.1 – Project Schematic • Double click “Engineering Data” to access material properties. • With “General Materials” highlighted click the ‘+’ next to “Aluminum Alloy” and “Polyethylene” properties to add them to the project. • “Return to Project”. 3. 4. 5.

  7. … Workshop 6.1 – Project Schematic • Drag/drop a “Steady State Thermal” system onto the “Geometry” cell in the first system. • Prior to releasing the new system the drop box should indicate cells A2 and A3 will be shared • When complete the schematic should graphically indicate this data sharing as shown here (we now have 2 “systems”, A and B). 6.

  8. … Workshop 6.1 – Project Schematic • Double click the “Model” cell in the first (A) system to open the Mechanical application. • From the Units menu choose: • “Metric (mm, kg, N, s, mV, mA)” • “Celsius (For Metric Systems)” 7. 8.

  9. Workshop 6.1 – Preprocessing Change the material and mesh on the pump housing (“Part 1”): Highlight “Part 1” under geometry. From details import the material “polyethylene”. Highlight the Mesh branch and set the mesh relevance = 100. a. b. c.

  10. Workshop 6.1 - Environment Apply temperatures (highlight the Steady State Thermal branch): Select the interior surfaces (13 faces) of the pump housing (hint: use “Extend To Limits” selection feature). RMB > Insert > Temperature. Set “Magnitude” field to 90 °C. a. b. • Select the mating surface of the pump housing. • “RMB > Insert > Temperature”. • Set “Magnitude” field to 60 °C. c. e. d. f.

  11. . . . Workshop 6.1 - Environment Apply Convection: Select the exterior (32) surfaces of the pump housing (hint: use extend to limits). “RMB > Insert > Convection”. In the “Details of Convection” click in the “Film Coefficient” field and choose “Import . . . ”. Be sure to choose import for convections. “Import” the correlation “Stagnant Air – Simplified Case”. Set the “Ambient Temperature” field to 20 °C. b. a. c. d. e.

  12. Workshop 6.1 – Solution – Model A 12. • Solve the model. • When the solution is complete insert Temperature and Total Heat Flux results (solve to evaluate results). • Results for polyethylene model. 13.

  13. Workshop 6.1 – Model B Setup • From the project schematic double click the “Model” branch in system “B” to open a second Mechanical application window. • Repeat steps 9 (a thru c) choosing “Aluminum Alloy”. • Repeat steps 10 and 11 to apply the same boundary conditions on Model B. • Repeat steps 12 and 13 to solve and view results for model B. 14.

  14. Workshop 6.1 – Solution – Model B • Results for aluminum alloy model.

  15. . . . Workshop 6.1 – Postprocessing Compare Heat Flux: Highlight the “Total Heat Flux” results from each model and switch to vector display mode. Activate vector display Control vector density Polyethylene Aluminum

More Related