1 / 38

Graphic Communication

CAD Commands. Graphic Communication. Technology Department. 2D & 3D CAD Commands. There are a number of common commands that are used in 2D and 3D CAD packages. You have to know what these are and what they do. The 2D CAD package used in this presentation is 2D Design.

rogan-sharp
Download Presentation

Graphic Communication

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CAD Commands Graphic Communication

  2. Technology Department 2D & 3D CAD Commands • There are a number of common commands that are used in 2D and 3D CAD packages. • You have to know what these are and what they do. • The 2D CAD package used in this presentation is 2D Design. • The 3D software used is Rhino 3D, as used in industry.

  3. Technology Department 2D CAD Commands - Grids Orthographic projection grid Iso top Isometric projection grid Iso left Iso right

  4. Technology Department 2D CAD Commands – Grid Snap • Grid snap only allows the cursor to follow the corners of the squares on the box. • This allows drawings to be produced quickly and accurately.

  5. Technology Department 2D CAD Commands - Library • A CAD library allows frequently used symbols like sockets or doors to be selected from a pre-drawn catalogue and placed anywhere on the drawing. • This saves the user time and effort.

  6. Technology Department 2D CAD Commands - Layers • Layers can be used to draw different parts of a drawing. • For example the room layouts could be drawn on one layer, the furniture layouts on another and the electrical fittings on another. • These layers can be viewed all together or one by one. • It is like drawing these parts on tracing paper and placing them on top of each other. • This allows the user to view different parts of a building plan individually to look at parts of particular interest.

  7. Technology Department 2D CAD Commands - Zoom • Zooming in allows you to see smaller parts of a drawing in greater detail. • Zooming out allows you to see the whole of a larger drawing or can be used after you have zoomed in. Zooming in Zooming out

  8. Technology Department 2D CAD Commands – Line Types • You can draw the different line types needed for your drawing simply by selecting the line and selecting a line type for it. By clicking on line type a menu of available lines appears. You simply select the type you require.

  9. Technology Department 2D CAD Commands - Box/Circle/Arc • You can draw common shapes quickly and easily by selecting tools. • You can also choose how you want to configure these shapes. E.g. in the case of circle you can drag its size out or set it by typing in either its diameter or radius.

  10. Technology Department 2D CAD Commands – Automatic Dimensioning • The computer calculates how long a line is or the diameter of a circle or the radius of a curve and automatically places this size on the dimension line.

  11. Technology Department 2D CAD Commands – Copy & Paste • You can copy parts of a drawing that will be repeated and paste these parts elsewhere. • This is more suitable for either irregularly spaced copies or 1 copy of the same shape.

  12. Technology Department 2D CAD Commands – Box Arrays • This allows shapes to be repeated in a predetermined order. • The user chooses how many shapes are to be repeated along the x-axis and the y-axis. • A box type shape is formed with the repeated parts hence the name box array. An example of a box array with 2 repetitions along the x-axis and 3 repetitions along y-axis

  13. Technology Department 2D CAD Commands – Ring Arrays • This allows shapes to be repeated in a circular pattern. • The user chooses how many shapes are to be repeated and the angle at which they are to be repeated. • The user can also control how many shapes are to be repeated going out from the centre of the revolution. • The user must then select the centre point of the ring array either by clicking on the drawing or typing a co-ordinate into the ring array instruction box.

  14. Technology Department 2D CAD Commands – Ring Arrays This is an example of a ring array with the instruction box shown alongside.

  15. Technology Department 2D CAD Commands - Fillet • This is when the user adds a curve to a corner. • In AutoSketch 6 this command is called Trim Round.

  16. Technology Department 2D CAD Commands - Chamfer • This is when the user adds a 45° line to a corner.

  17. Technology Department 2D CAD Commands - Tangent • This command allows the user to draw a line at a tangent to a circle. • This makes this type of line very easy and quick to produce. An example of lines of tangency drawn between 2 circles.

  18. Technology Department 2D CAD Commands - Break • This command lets the user delete a part of a line without having to delete all of it and redraw what is needed to be kept. • This is quicker and easier to do than redrawing a whole line. Line broken between these 2 points

  19. Technology Department 2D CAD Commands - Trim • This allows the user to either extend a line to meet the edge of another shape or shorten a line to meet the edge of a shape.

  20. Technology Department 2D CAD Commands - Trim We will trim these 2 lines to the box, one will extend to reach the edge and one will be shortened to meet the edge. Extended line Shortened line

  21. Technology Department 2D CAD Commands - Extend • Extending a line is how we make it longer Drag the handles on the ends of the line to make it longer or shorter.

  22. Technology Department 2D CAD Commands - Rotate • This allows the user to turn an object around any angle based on a centre point of rotation. This box has been rotated by 45° with its rotation basepoint the centre of the rectangle.

  23. Technology Department 2D CAD Commands - Scale • This command allows the user to say how much bigger or smaller they want to make a drawing they have done. • This makes scaled drawings much quicker and easier to do as a number of different scales can be produced using the 1 drawing.

  24. Technology Department 2D CAD Commands - Mirror • This command gives you a mirror image of the shape you have drawn. • The user has to set where the mirror would be placed then the image is created. The purple shape has been mirrored vertically along the left hand side.

  25. Technology Department 3D CAD Drawing types - Wireframe • These types of drawings only show the structure of the object drawn. • No other details are shown.

  26. Technology Department 3D CAD Drawing types – Surface Rendered • These types of drawings show the objects as solid shapes.

  27. Technology Department 3D CAD Drawing types – Surface Rendered • You can view surface detail as a rendered block. • It looks realistic due to the highlights and shading generated by the package. • Some packages like Rhino3D also allow you to add material to the shape. • This allows high quality drawings to be produced very quickly.

  28. Technology Department 3D CAD Drawing types – Surface Rendered • An Example is shown below.

  29. Technology Department 3D CAD Drawing types – Surface Rendered • This allows high quality drawings to be produced very quickly. • It also means that very realistic models of a design can be produced without having to manufacture them, saving design firms time and money.

  30. Technology Department 3D CAD Drawings • As all 3D packages use different commands to produce shapes so you will not be asked to name any of these commands in your exam. • You should however, be aware of some of the things that can be done using these packages.

  31. Technology Department 3D CAD Drawings • There are certain things common to all 3D packages and this is how the shapes are produced. • You can: • combine shapes • subtract them from each other • add them together • obtain the orthographic views of the 3D object using one command.

  32. Technology Department 3D CAD Drawings – Combining Shapes • Shapes can be combined.

  33. Technology Department 3D CAD Drawings – Subtracting Shapes • Shapes can be subtracted from each other.

  34. Technology Department 3D CAD Drawings – Adding Shapes • You can add shapes to each other.

  35. Technology Department 3D CAD Drawings - Orthographic Views • You can use one command to obtain the 3 orthographic views of the object. Plan Elevation End Elevation

  36. Technology Department 3D CAD Drawings • There are a huge number of other things you can do with 3D CAD packages. • It is because of the speed that these very realistic drawings can be produced at that design companies have moved to using these type of drawing packages.

  37. Technology Department 3D CAD Drawings - Advantages • An orthographic drawing of an object can be produced by the software by clicking a button. • Very realistic objects can be designed very quickly. • Because these designs are so realistic and can be made to look like the actual material they will be made from, clients can see exactly what is being made so a physical model is not required, reducing costs and the time it takes to design a new product.

More Related