1 / 27

Machine tools ( 工具機 )

Machine tools ( 工具機 ). 車床. CNC 車 床. 手動三 軸工具機. Z 軸. Y 軸. X 軸. CNC 三軸工具機. Z 軸. Y 軸. a 軸. X 軸. b 軸. 龍門式. 雙軸同動技術. 史都華六軸平台. Section A Introduction. 1 、 SHOP SAFETY ◎ Identify and use common shop safety equipment. (eye, foot, ear protection)

ronald
Download Presentation

Machine tools ( 工具機 )

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Machine tools (工具機)

  2. 車床

  3. CNC車床

  4. 手動三軸工具機 Z軸 Y軸 X軸

  5. CNC三軸工具機

  6. Z軸 Y軸 a軸 X軸 b軸

  7. 龍門式

  8. 雙軸同動技術

  9. 史都華六軸平台

  10. Section A Introduction 1、SHOP SAFETY ◎ Identify and use common shop safety equipment. (eye, foot, ear protection) ◎ Identify common shop hazards.

  11. 2、MECHANICAL HARDWARE THREADS(螺紋) Fig：A-16(螺桿、螺紋) ◎ major diameter、pitch diameter minor diameter、pitch、thread angle ◎功用：machine tool… ◎三總種類(UNC UNF UNS) 1/2in.－13UNC in(英吋)

  12. FIT(匹配) 1/2in.－13UNC 2A in(英制) 1A、2A、3A A：external thread 1B、2B、3B B：internal thread ◎1A and 1B have the greatest manufacturing tolerance. (Table：A-3) ISO mm(公制) M10×1.5 (Table：A-3) ◎ Has 25 thread sizes with major diameter ranging from 1.6mm to 100mm.

  13. Bolts(公螺絲)、nut(母螺絲)、 screws (螺絲釘) Fig：A-17 ◎The strength of an assembly of parts depends to a large extent on the diameter of the screw or bolts used. ◎The minimum thread engagement should be a distance equal to the diameter of the screw used；preferably it would be1.5 time the screw diameter.

  14. Machine bolts： Fig：A-18 ◎With hexagonal or square heads. These bolts are often used in the assembly of parts that do not require a precision bolt. Common bolts： Class 2A (UNC UNF) ◎ hexagonal heads：1/4 in~4in square heads.1/4in~1.5in

  15. Stud bolts： ◎The end of the stud bolt screwed into the tapped hold has a class 3A thread, while the nut end is a class 2A thread. Carriage bolts： ◎used to fasten wood and metal parts together.

  16. Machine screws： ◎Made with either coarse or fine thread and are used for general assembly works. ◎are slotted to be driven by screwdrivers. Fig：A-22 ◎diameter from 1/4in to 3/4in, Below 1/4 in screw has identified by numbers from 0 to 12. ◎EXAMPLE Setscrews： ◎Are used to lock pulleys or collars or shafts.

  17. Square head setscrews： ◎toolholders or as jackscrews. NUTS： ◎most nuts are either hex or square A thin hex nut is called a jam nut. It is used where space is limited. Fig：A-34 Internal thread insert：(螺紋襯套) Fig：A-35

  18. Washers(墊片) ◎Distribute the pressure over a larger area, prevent the marring of a finished surface. Fig：A-40(多種墊片) Pins, Retaining Rings, Keys： ◎Dowel pins、Taper pins：are heat treated and precision ground. ◎Retaining Rings：internally and externally. ◎Keys

  19. 3、READING DRAWINGS Communication between the designer and the people who produce the final product.

  20. Section B Hand Tools 1. ARBOR AND SHOP PRESSES ◎two basic types：hydraulic and mechanical. ◎the major uses are bushing(襯套) installation and removal. Fig：B-1 Fig：B-2 Installing Bushings(襯套、軸承結合) ◎interference fit(干涉) or press fit ◎bronze and hardened stell ◎bushing should have chamfer Fig：B-5 ◎Fig：B-6、B-7、B-8、B-9、B-11

  21. Keyseat (Keyway) Broaching 1.choose the bushing that fits the bore and the broach. 2.correct-size into the bushing slot. 3.place this assembly in the arbor press. 4.lubricate 5.push the broach through 6.lean the broach 7.place second-pass shim in place 8.repeat 4~7

  22. 2.Hacksaws鋼鋸 ◎1/2in-wide and 0.25in thick ◎ set(變形)：鋸齒在每一側偏某一距離， 已讓齒背存在有一些間隙Fig：B-69 ◎可分為：straight set、wavy set(common use) ◎pitches are 14,18,24,32 teeth per inch 3.Files 銼刀 Fig：B-74 different length。

  23. 4.Hand Reamers手鉸刀 ◎ fig B-101 ◎用處(定位pins) ◎ 0.001~0.005 Removal amount ◎ high-carbon ,or high –speed steel ◎ taper help 保持垂直、對準 ◎ 手鉸刀可視為刮刀，not cutting tool 通常是zero radial on the cutting face. fig B-102 ◎ Straight flute Helical flute 對於有keyseat（smooth cutting） ◎ The right-hand cut with a left-hand helix is considered standard for hand reamer.

  24. 膨脹鉸刀（Fig 105） （0.006/~1/2in, 0.01/1/2~1in, 0.012/Φ1~1.5in） ：錐形螺絲來控制；可膨脹0.006in鉸刀本體 中心開一錐孔（0.015mm）刀槽並製有削槽， 插入錐度栓可使錐度部擴張。 可調整鉸刀(Fig106) 本體製有螺紋，留有taped槽，將有錐度的blade 置入slot中，調二端螺帽，以變化刀直徑 Φ =1/4~3 in，調整範圍1/32 in~5/16 in

  25. Taper pin reamers(Fig B-107,B-108) ◎ straight flute and spiral flute taper pin hand reamer. Morse taper socket reamer (Fig B-109,B-110) 5.Use of Hand Reamed (Fig B-111, B-112) ◎對小而輕功件則固定reamer，轉動工件 ◎鉸孔前,去毛邊 以獲得較佳的孔位對齊 ◎鉸孔利用切削液，增加表面精度但 鑄鐵、黃銅 不需要

More Related