1 / 6

Preventive Maintenance Steps Taken In a Car Servicing Schedule

The engine oil level has to be maintained to ensure proper lubrication of the engine and prevent it from premature damage. Checking the engine oil level should be done 5 minutes after the fully warmed-up engine is turned 'off'. This checking can also be done before starting the engine after it has sat for a long time. https://www.garrysauto.com.au/<br><br>

ronniematt
Download Presentation

Preventive Maintenance Steps Taken In a Car Servicing Schedule

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Why Should You Need To Change The Filter And Oil Of The Vehicle?  garrysauto.com.au

  2. Regular car owners need to get car servicing done regularly. • This will ensure that the vehicle runs fine without consuming too much fuel. • Regular car maintenance should not be neglected at all. • Some essential steps are needed, like changing the oil, topping up the coolant and so on. • Ignoring them can lead to poor fuel economy and unpredicted breakdowns. • Several steps are there to take in both petrol and diesel services. garrysauto.com.au

  3. CHANGING THE ENGINE OIL • The engine oil level has to be maintained to ensure proper lubrication of the engine and prevent it from premature damage. • Checking the engine oil level should be done 5 minutes after the fully warmed-up engine is turned 'off'. • This checking can also be done before starting the engine after it has sat for a long time. garrysauto.com.au

  4. BRAKE FLUID • The braking mechanism performs when the correct amount of oil is in the master cylinder. • You must inspect the condition and amount of brake oil on the master cylinder and remove the lid. • If some topping up is required, you can consult the car servicing professional, or even a bar fitter can do this job for you. garrysauto.com.au

  5. POWER STEERING FLUID • This fluid has to be checked by removing and checking the dipstick. • This dipstick is attached to the cap of the power steering fluid tank. • If some topping up is required, it can be done under the guidance of a car servicing professional. garrysauto.com.au

  6. Contact 5/2 Gladstone Road, Address: Castle Hill, NSW 02 9899 2522 Phone: http://www.garrysauto.com.au/ Website:

More Related