1 / 9

AATC PRESENTATION - COMPANY (1 OF 3 – PRESENTATIONS – REVISION 2013_1031)

AATC PRESENTATION - COMPANY (1 OF 3 – PRESENTATIONS – REVISION 2013_1031). Investment Casting ’ s. Investment castings reduce or eliminate alternate manufacturing processes such as hog-outs and are designed for multiple quantities of same size parts.

ronny
Download Presentation

AATC PRESENTATION - COMPANY (1 OF 3 – PRESENTATIONS – REVISION 2013_1031)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. AATC PRESENTATION - COMPANY (1 OF 3 – PRESENTATIONS – REVISION 2013_1031)

  2. Investment Casting’s Investment castings reduce or eliminate alternate manufacturing processes such as hog-outs and are designed for multiple quantities of same size parts. We are located in Phoenix, Arizona and have been in business for 24 years as an established company in manufacturing of investment castings. We have new; modern facilities for casting, heat treating, non-destructive testing, machining and assembly processes. We have local customer approved vendors for special processing and finishing. Our parts are used in many industries; primarily in the commercial and military aerospace aircraft industry. We are a low overhead; low cost manufacturing facility, with no bank loans and a strong balance sheet. We have a large loyal customer base with long-term contracts through 2017. Quality We are committed to quality. Our commitment is understood by Management and Employees and is measured through regular customer performance and on time delivery ratings. About AATC We are committed to supporting our customers from manufacturing through on time delivery and provide “safety stock” to eliminate lead-time. Commitment Our Management Team and Employees are committed to growth and continuous improvement of our company. Management and Employees with 5 years of service, own 30% of the company. Management Now that you are ready to Request a Quotation! Please call our President. Arthur A. Abbey on his Mobile +1-602-670-5872 Please visit our user friendly website: www.aatcinc.com We want your business

  3. Investment Casting Process; Flow Chart Shell Removal After the metal solidifies and cools, the ceramic shell is removed. Firing the Mold Finishing Operation Shell Building Wax Injection Remaining gate protrusions are removed by belt grinding. The now hallow ceramic shell is fired to burn out residual wax material. The hollow mold is then prepared for casting by firing it to 2000 degrees F (1100 ̊C). The shell building involves dipping the pattern assembly into a ceramic slurry, then into fine sand. After that dries, the process is repeated multiple times. The process begins with a wax pattern. This wax pattern is made by injecting molten wax into an aluminum mold or pattern. 5 10 7 9 1 2 3 4 6 8 Raw Casting Complete Casting Pattern Assembly The wax pattern receives gates and is attached by the gates to a central wax runner system which is called a tree or setup. The preheated shell is filled with molten metal by gravity pouring. De-wax Operation Cutoff The completed shell is placed into a steam autoclave where the wax pattern material is melted out. Individual castings are then removed from the setup by friction saw/cut off wheel.

  4. Investment Casting Process; Flow Chart Surface Finish Final surface finishing is now applied such as paint, prime or cad plate. Machining Finial Inspect & Part Marking Straightening Heat Treat (A) Any dimensions that cannot be cast into the parts are now manufactured at this step. Parts are visual inspected, dimensionally inspected and all part marking is applied. Investment casting’s (all alloy’s) typically require this process step to insure dimensions meet all drawing requirements. The individual castings are heated to a desired range to soften their properties. 15 20 19 11 13 14 16 17 18 12 Completed Part NDT (Final) Nondestructive Testing (NDT) Parts to “Safety Stock” ready for delivery to the customer. After straightening, heat treat and machining, part require final NDT Depending on part requirement. Penetrant, Magnetic Particle and Radiographic inspections may be performed. Heat Treat (B) Assembly The individual castings are heated to a desired range to harden their properties. As required, the installation of bushings or bearings will be installed at this step.

  5. Primary Alloy Listing Note: AATC, Inc. only has air melting capabilities, we do not have vacuum casting capabilities.

  6. Accreditations

  7. Certifications

  8. ITAR Registration Certificate

  9. Contact AATC, Inc. 2950 W. Catalina Drive Phoenix, AZ. 85017 – USA Arthur A. Abbey; President Email: arthura@aatcinc.com Phone: 1-602-268-1467 x 237 Fax: 1-866-792-2814 International Phone: +1-602-268-1467 Fax: +1-866-792-2814 Website: www.aatcinc.com AATC Business Hours M-F 6:00 A.M. – 2:30 P.M.

More Related