1 / 9

Series and Parallel Circuits

Series and Parallel Circuits. Simple electrical circuits can be made using an energy source and resistors. We can measure current intensity using an ammeter . Potential difference is measured using a voltmeter . Symbols used in circuit diagrams: Resistor:

ronny
Download Presentation

Series and Parallel Circuits

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Series and Parallel Circuits

  2. Simple electrical circuits can be made using an energy source and resistors. We can measure current intensity using an ammeter. Potential difference is measured using a voltmeter. Symbols used in circuit diagrams: Resistor: Switch: Power source (battery): Ammeter: Voltmeter:

  3. There are two main types of electrical circuits. The way the elements are connected to one another determines the type of circuit. If the elements (power source and resistors) are connected in one loop (one path) this is called a series circuit.

  4. If the elements are connected to one another using multiple branches (more than one path) then this is called a parallel circuit.

  5. Ammeters and Voltmeters When measuring the current intensity, the ammeter is always attached in series to the rest of the circuit. The voltmeter is attached in parallel.

  6. Kirchhoff’s Laws (EST) Series circuit: When resistors are connected in series all current travels through each resistor. The disadvantage of such a circuit is the fact that if one of the appliance burns out, the current flow is broken, as a result the circuit is broken.

  7. The equivalent Resistance: RT = R1 + R2 + R3 The disadvantage is that the total resistance increases as you add on resistors Total Voltage: VT = V1 + V2 + V3 The voltage drops as you add resistors. The current: IT = I1 = I2 = I3 The current is the same at every point in the circuit

  8. Parallel Circuit A parallel circuit is when the elements (resistors, light bulbs, fan, etc.) are connected side by side to each other. This connection allows the current to flow along different paths at the same time. The current intensity through any path will be a fraction of the total current. The advantage of such circuit is that if one resistor burns out there is still current flowing through the rest.

  9. The equivalent Resistance: The equivalent resistance is smaller than the resistance value of any individual resistor. RT = (1/R1 + 1/R2 + 1/R3 )-1 Total Voltage All devices in parallel experience the same potential difference (voltage) VT = V1 = V2 = V3 The current The current from the battery equals the sum of the current intensities through each the resistors. IT = I1 + I2 + I3 ……

More Related