230 likes | 552 Views
IPmux-216 General Availability. IPmux-216 TDM Pseudowire Access Gateway. IPmux-216. Supports TDM, HDLC-based and Ethernet services over Ethernet, MPLS or IP networks with pseudowire technology Ideal solution for Cellular backhaul, PSTN access and TDM trunking
E N D
IPmux-216TDM Pseudowire Access Gateway IPmux-216 • Supports TDM, HDLC-based and Ethernet services over Ethernet, MPLS or IP networks with pseudowire technology • Ideal solution for Cellular backhaul, PSTN access and TDM trunking • Provides cost effective solution for converging new and legacy services over packet infrastructure Compact 1 U, 19” enclosure IPmux-216 16 x E1/T1 ports 3xFast Ethernet Ports (3xSFP/UTP) External Clock Port Terminal craft port, Alarm relay 2xAC, 2xDC, AC/DC PSU
TDM Pseudowire Gateway Family • 4 BRI or Analog Ports • 1,2 or 4 E1/T1 Ports • Up to 16xTDM ports • PSU redundancy • High capacity • Fully Redundant • Modular Gmux-2000 IPmux-24 IPmux-216 Gigabit Ethernet IPmux-14 Fast Ethernet IPmux-1E CPE/CLE Access/Aggregation PoP/CO/Hub
IPmux Updated Product Line Product
IPmux-216 v1.0 Applications
Leased Line IPmux-216 IPmux-216 Private Line/Leased Line over Packet Building 1 Building 2 Beneficial to: • Businesses: Small, medium and enterprises • Alternative carriers looking to increase service offering • Incumbents in migration or outside their network reach Benefits • Customer does not need to replace HW • Reduced leased line costs by using a single line for voice and data • Reduced OpEx by using Ethernet vs. TDM network Ethernet/MPLS/IP TDM Pseudowire GbETH GbETH PBX PBX LAN LAN
TDM Backhaul/Trunking over Packets Gmux-2000 Gmux-2000 GbE GbE SDH Ethernet/MPLS/IP Beneficial to: • Alternative Carriers save on leased capacity from incumbent • Large enterprises looking to save on leased line costs Benefits • Small foot print with high capacity: 196xE1/T1 for a 6U chassis • Grooming of E1/T1 into lower cost STM-1/OC-3 ports • Under $500 per E1/T1 link – best price/performance E1/T1 STM-1/OC-3 E1/T1 STM-1/OC-3 PABX PBX Class 5 Switch
Cellular Backhaul over Packet 3G RNC Node B IPmux Beneficial to: • Cellular service providers who own their network • Telecoms, incumbent and alternative, selling services to cellular service providers Benefits • Provides reliable replacement for cellular backhaul with jitter and wander conforming to G.823 syn and 16ppb clock accuracy • CapEx savings Eliminates the need for accurate clock source at every base station E1/T1 C.STM-1 FE Gmux-2000 Clock GbE 2G BSC Ethernet/MPLS/IP BTS 196 E1/T1 C.T3, C.STM-1 E1/T1
PSTN Access over packet E1/T1 IPmux-216 Gmux-2000 Fiber Ethernet Cable HFC Infrastructure Ethernet / IP / MPLS Beneficial to: • Alternative Carriers • Incumbents in migration or out of their network reach Benefits • Unified TDM over packet solution regardless of access technology • Enables Ethernet and TDM service on the same infrastructure. • Alternative carriers can increase revenue by selling lucrative TDM services GbE nxT1/E1 Or C.OC-3/C.STM-1 FT1/T1/n*T1 FE1/E1/n*E1 CMTS Cablemodem IPmux-24 PSTN Fixed Wireless FT1/T1/n*T1 FE1/E1/n*E1 DSLmodem IPmux-1E IPmux-24
IPmux-216 Features
Legacy and Ethernet services • TDM Service • Up to 16 framed or Unframed E1/T1 with CAS*/CCS signaling and DS0 level bundles • Fully transparent emulation of TDM circuit • Conforms to G.823/4 jitter and wander requirements • HDLC Service • nx64Kbps bandwidth assignment • Port support for HDLC-based data: Frame Relay, X.25, PPP • Bandwidth is optimized by suppressing idle flags • Ethernet Service • Up to 3 GE or FE service ports • Ingress and Egress rate limiting per user port and net port • VLAN stacking (q-in-q) *CAS supported in TDMoIP mode only
Pseudowire technology • Complies with the leading Pseudowire standards • TDMoIP and CESoPSN – for structured TDM service • SAToP/RFC4553 – for unstructured TDM service • HDLCoPSN – for HDLC based services • Supports packet networks as transport • Ethernet – Each Pseudowire is assigned a specific VLAN ID • MPLS – Each Pseudowire is statically assigned an MPLS label • IP – Each Pseudowire is assigned a destination IP address • Performance and flexibility • Minimum of intrinsic delay with ASIC based architecture • Up to 256 concurrent Pseudowires with TDM DS0 level grooming • Each Pseudowire can be assigned any number of time slots (bundles) • Pseudowires are individually configured for TDMoIP, CESoPSN, SAToP or HDLCoPSN
Clock Recovery and Timing • Timing • TDM ports can be configured for timing as any standard TDM device • LBT – Loopback Timing • Internal – Using the IPmux internal oscillator • External – Using a dedicated clock port with external clock source • System clock with failover support from one source to another • Compensates for packet delay variation (PDV) with configurable jitter buffer from 0.5 to 180 msec • Overcomes lost or mis-ordered packets up to 5% of traffic • Adaptive Clock Recovery • The remote IPmux-216 can recover the original transmitting clock over the packet network with great accuracy • Independent clock recovery mechanism per TDM port • 16 ppb frequency accuracy with 1ppb/day holdover for cellular backhaul • G.823 synchronization mask for high quality E1 circuit • G.8261 synchronization over packet networks conformant
Ethernet Services and QoS • Ethernet capabilities • Support Ethernet Private Line (EPL) Services via 2 network ports • VLAN aware and unaware bridge with VLAN stacking support (802.1Q) • Egress and ingress rate limiting with CIR/CBS bandwidth profile • CIR Granularity • CBS size • MEF9 and MEF14 Certified for EPL services* • Quality of Service / Class of Service • 4 Queues implementing strict priority with highest priority for TDM Pseudowire traffic • Supports priority according to VLAN tag, 802.3p bit or TOS/DSCP bits • Egress network traffic marking, P bit assignment per user port Customer Premises TDM IPmux-216 FE/GE FE/GE Premium data Best Effort data * Version 3.5
Management and Security • Management • DB-9 Craft port • SNMPv1 agent with trap notification • Device configuration via web based, telnet • Alarm dry contacts • Security • Centralized authentication by RADIUS Client • Secure access with telnet via SSHv2 • Secure Web access via SSL *Supported in version 1.5
Fault Management & Troubleshooting • Alarm Propagation • The IPmux propagates TDM Alarms across the PSN: LOS, RDI and AIS (Trail Extension mode) • Diagnostic Loopbacks • IPmux gateway can be remotely set to loopback traffic towards PSN or towards TDM device • T1 facility loopback activate by code
Performance Monitoring & Statistics • TDM Statistics are collected in 15 minute intervals that are written to memory holding 96 intervals covering 24 hours • Per Pseudowire statistics • Connectivity Status • Sequence Errors • Jitter overflow and underflow and maximum deviation • Per TDM physical port statistics comply with • G.826 and • RFC 2495 • Ethernet Statistics per physical port • RFC 2819 e.g. Rx Frames, Tx Frames, dropped frames etc.
Limitations • IPmux-216 Gigabit Ethernet ports are available as SFP ports only. Gigabit Ethernet copper is supported using RAD’s SFP-9G (1000 only, 100/1000 will be supported in future version). • 1st and 2nd Ethernet ports rate (FE or GbE) must be the same. • Downloading SW can be done using TFTP from the main menu only (not from the boot menu) • HDLCoPSN is supported with no performance monitoring (PM).
IPmux-216 Product Range
IPmux-216 Summary • Multi-service CLE Providing TDM voice or data and Ethernet Private Line (EPL) services compliant to MEF 9 & 14 • Up to 3 FE/GE auto-detect ports with network protection • Complete Pseudowire support for TDM and HDLC services with TDMoIP, CESoPSN, SAToP and HDLCoPSN • Support for Ethernet, MPLS and IP transport networks • Highly Accurate Clock Recovery with 16ppb and holdover for cellular backhaul deployments • Redundant hot swappable power supplies • Alarm port