1 / 18

Rotating Compost Barrel Construction

Rotating Compost Barrel Construction. Materials Needed. Treated 4 - 2x4s 4ft long 2 - 4x4s 4ft long. 55 Gallon Barrel. 5 foot metal pole/fencepost. Handle/Rope. Materials Needed (cont.). 2 Corner Brackets 1x6x12” piece of Hardwood for mixing paddle. Furring strips 3 – 10” 2 – 3”.

rubino
Download Presentation

Rotating Compost Barrel Construction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Rotating Compost Barrel Construction

  2. Materials Needed Treated 4 - 2x4s 4ft long 2 - 4x4s 4ft long 55 Gallon Barrel 5 foot metal pole/fencepost Handle/Rope

  3. Materials Needed (cont.) 2 Corner Brackets 1x6x12” piece of Hardwood for mixing paddle Furring strips 3 – 10” 2 – 3” 16 - 3” screws Hinges Hasp Lock

  4. Recommended Tools Drill Jigsaw Circular Saw Hammer Measuring tape Framing square Flexible ruler ¾” and 1” Drill Bits Hole Saw

  5. Step 1: Drill Holes in barrel for Post Find the center of the barrel on each end and mark it Drill a hole slightly larger than the diameter of your metal pole centered on each mark

  6. Step 2: Drill Aeration Holes in Barrel Drill 15-20 holes with a 1 inch bit on each side of the barrel Should have 30-40 holes for aeration when finished

  7. Step 3: Attach mixing paddle Inside the barrel screw the corner brackets into the plastic To attach paddle to the barrel screws will have to go trough barrel into (1) 10” furring stripe on the outside of barrel. • Attach mixing paddle to corner brackets using screws

  8. Step 4: Drill Holes in 4x4 for post Measure 6” down on both 4x4 posts, and mark the center of each post On the mark drill a hole slightly larger than the diameter of your metal pole (do this on both 4x4s)

  9. Step 5: Assemble Stand Stand 4x4s up with holes at the top and place a 2x4 on each side Use screws to secure 2x4s to the 4x4s

  10. Step 5: Assemble Stand Part 2 Find the middle of the remaining 2x4s and center them on the end of the 4x4 perpendicular to the other 2x4s Place one screw into each of the 2x4 ends and one into the 4x4 Make sure you don’t hit the screws going the other direction

  11. Step 6: Place barrel on stand Slide post through holes on barrel Put one end of post through the 4x4, slide post through until the other end will slide into the other 4x4

  12. Step 7: Drill Holes to cut out door Measure and draw a 12” x 12” section for the door Drill a small hole in each corner for the jigsaw to get started Start the jigsaw in each corner and cut out the door

  13. Step 8: Attach door with hinges Drill a hole through the plastic on your marks • Hold the hinges up to the door and mark where the screws will go

  14. Step 8: Attach door with hinges (cont.) Repeat process to attach door to barrel Holding (1) 10” furring strip underneath the holes attach the hinge with the screws provided

  15. Step 9: Attach Hasp Lock Mark drill holes on the handle side Drill pilot holes as before Holding (1) 3” furring strip underneath the holes attach the top part of the hasp with the screws provided Repeat for the latch on the barrel

  16. Step 10: Attach Handle Drill holes through door Thread rope through holes Tie a knot in both ends of the rope to achieve a handle of your desired length • Completed door with handle and hasp attached

  17. Enjoy your finished rotating composting barrel

  18. Thank you to our Sponsors! • Department of Environmental Protection Environmental Education Grants Program • Bee Kind Winery • Hoyt Plumbing and Heating

More Related