6 useful benefits of outsourcing point cloud to BIM Services - Offshore Outsourcing India

1. 6 useful benefits of outsourcing point cloud to bim services Created By:

2. Introduction • Point cloud to BIM modeling outsourcingis the service that has achieved a rapid growth within the AEC industry. These are the services that are undertaken by the survey companies, construction companies, and architectural firms globally. • The process here is to convert laser scans into highly detailed and accurate 3D models. • There are three important phases of Point cloud modeling services. • The listing for the same is scanning and surveying phase, registration phase, and conversion phase. It is going to help the process of the scan to 3D models or CAD drawings. Usually, the demand for this scanning and registration is done only by the survey companies locally.

3. These companies have a device that helps in laser scanning that helps in deeply scanning the building design. With the help of this software, even a detailed and the deepest of building components are captured in the form of point clouds. This is then later been put together in the form of a registered point cloud image. Later on, these raw formats are converted into a user-friendly format that can easily be accessed through various BIM software such as Revit, AutoCAD, and ArchiCAD, etc. • Now let us proceed further and find some of the valid benefits that share the details of utilization of point cloud modeling services. Below mentioned are 6 benefits of using scan to BIM conversion services. We at Offshore outsourcing India is one of the leading organizations that deliver the services as per the expectation of the clients by adhering to all the necessary tools and software that are required.

4. 1 Save surveying Time • In the era of the 21st century, the use of the laser scan technique is very much in demand. It is because it saves a lot of time in surveying the design and drawings of an old building or any existing site that requires renovation. It can be the survey company who can invest in a good laser scan equipment that will help them to scan the building into different phases. This process is an easier process rather than having 3 to 4 technicians on-site just for taking the measurements.

5. The overall cost and effort here are reduced by approximately 40% in total. With this process, the data can easily be captured and with their 3D geometry using laser scan beams which can later be converted into scan images. This eventually also reduces the time for visiting the field to a great extent.

6. 2 Accurate Results • One of the most important advantages of using Point cloud to BIM outsourcing services is that it gives information that is true of high precision as well as having an accurate data collection. Moving further if the collection of the data is correct, accurate, and precise the conversion of the scan to BIM models will give a great result. • The entire process is very much dependent on the understanding of the technicians, the reviews, judgments, and other factors too. Using the service of scanning is proven to be an improved option as it gives the visibility of the deepest and the smallest information of the building components such as beams, pipes, and other details.

7. 3 Detailed Building analysis • To have a detailed review and analysis of any typical building the process of converting laser scans to BIM models has bought a great transformation. There was a time where the building was put up for renovation or restructuring, and this entire process was consuming a lot of time and energy. At the time of building projects, there are many issues that do arise and with this, the building components are not visible and thus this surveying is needed, and with this, the actual process of demolition is checked and viewed. • Indeed this process has changed for good and all because of laser scanning. All the critical issues are easily visible along with the visibility of the building components during the scanning process, because based on these details the renovation process can begin.

8. The process of building analysis is working hand in hand with a scan to the BIM modeling process. It is the laser scans that are first converted into detailed BIM models with all the building data that are incorporated in it. Later on, these models are been analyzed so as to verify to check the damaged building components, re-designing and restructuring the building, implementation of BIM compliances prior to construction, and a lot many things that need to be taken care of.

9. 4 Design Assessment for renovation • Design validation or its assessment is one of the most effective works that has completely changed the working pattern for the construction industry. This is all because of the effective use of scans to BIM modeling. For the renovation and refurbishment of the old and existing building structures, the demand for the scan to BIM conversion is very much in demand. • Thus, before proposing the new design for construction it is necessary to validate the details of the design. We all are very well aware that scanning a building into different laser images and then processing them for a seamless scan image is the very first stage as well as a step. • Moving further, these scanned images are transformed and used to develop a 3D model with all the details, levels, and components. These are related to beams, columns, slabs, doors, windows, or any of the MEP components that matter the projects. This model will provide a very comprehensive detail and the picture of the current building design and also can assist in developing the new design of the building.

10. 5 Seamless Collaboration between multiple teams • For establishing collaboration between the design engineers, architects, contractors and the end-user Point cloud to BIM service play a vital role. By developing 3D models from scans one can easily understand the current design and with that can proceed further for the discussion of the design too. It becomes easier and convenient to understand the design flaws. • Also, the updations that are required in the new proposal can also be discussed in it. Well, it is the BIM engineer who can easily integrate the architectural, structural, and MEP models that are developed from scans and that also in a properly coordinated 3D model to identify further details. These are related to the potential threats, interferences, and the design issues that are or can arise in the existing structure also with the required solutions to correct them.

11. 6 Reducing overall Cost • It is the fact that scan to BIM modeling helps in reducing the overall cost of the construction along with the survey cost. The traditional method survey in the past was termed to be extremely costly as well as time-consuming. • But now as compared to laser scan surveying, this cost has reduced to a great extent. When it comes to as-built modeling, we should not forget that point cloud BIM modeling has proven to be a great savior in construction planning and budgeting. • The best part with this is since we have the virtual construction modeling, errors, and the issues that can be identified and rectified at the early stage and this will, in the end, reduce an overall cost of construction.

12. Thanks You • Contact Us: • Name: Offshore outsourcing India • URL:http://www.offshoreoutsourcing-india.com/ • Email id: info@offshoreoutsourcing-india.com • Contact No: USA : + 1 - 408 - 216 - 7636UK  : + 44 - 208 - 819 - 5832Aus : +61 - 283 - 073 - 843India : +91 - 79 - 2685 - 2558