1 / 34

What is the Basic Signature Command

What is the Basic Signature Command Electronic ignition system with an optional cold climate pilot setting from the push of a button A/C 6 volt powered with instantaneous battery back-up If no A/C power is present it will run up to a season on 4 AA batteries 3 step flame height control

rusty
Download Presentation

What is the Basic Signature Command

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. What is the Basic Signature Command • Electronic ignition system with an optional cold climate pilot setting from the push of a button • A/C 6 volt powered with instantaneous battery back-up • If no A/C power is present it will run up to a season on 4 AA batteries • 3 step flame height control • Push button Command Center • Self diagnostic indicator • Memory setting • On/off and thermostatic with “Smart Mode” remote controls available

  2. What is Total Signature Command • Electronic ignition system with an optional cold climate pilot setting from the push of a button • A/C Module with 3 A/C accessory ports and instantaneous battery back-up • Full function touch screen remote include • Remote “Smart Mode” setting lets the remote control the flame and fan for optimal performance. • Push button Command Center • 3 step flame height control • 3 speed fan control with adjustable delay timer • 3 step intensity light control • 120 volt on/off auxiliary port for additional appliance control • Self diagnostic indicator

  3. Signature Command Components

  4. Connector to Command Center Connector to Stepper motor Connector to Solenoid and ground on valve Control Module Igniter Connection Flame Sensor Connection Thermopile Connection Gas type conversion cover Remote receiver on/off switch A/C adaptor connection

  5. Control Module • The Igniter and Sensor terminals are different sizes and labeled with an “I” and an “S” • The Thermopile connection is polarized and important to have the Red wire lead connected to the positive terminal.

  6. Pilot Assembly Igniter Wire Pilot Hood Flame Sensor Thermopile Pilot Bracket Air Shutter

  7. Command Center On/Flame Up Button Diagnostic light Off/ Flame Down & Memory Off Button Master Switch Battery Cover

  8. Control Valve Stepper Motor/ Regulator Solenoid wire harness connector Main Valve Solenoid Connection Pilot Solenoid Gas Flow

  9. Control Valve Pilot Adjustment Screw Outlet Pressure Port Inlet Pressure Port Pilot tube connection

  10. Wiring Diagram Signature Command

  11. Wiring Diagram A/C Module for KHLDV/VHLDV

  12. Wiring Diagram A/C Module

More Related