1 / 23

Engineering Physics : Lecture 10 (Chapter 7 Halliday )

Engineering Physics : Lecture 10 (Chapter 7 Halliday ). Work done by variable force Spring Problem involving spring & friction Work done by variable force in 3-D Newton’s gravitational force. Review: Constant Force. W = F  d No work done if  = 90 o . No work done by T .

rvelasquez
Download Presentation

Engineering Physics : Lecture 10 (Chapter 7 Halliday )

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Engineering Physics : Lecture 10(Chapter 7 Halliday) • Work done by variable force • Spring • Problem involving spring & friction • Work done by variable force in 3-D • Newton’s gravitational force

  2. Review: Constant Force... W = Fd • No work done if = 90o. • No work done by T. • No work done by N. T v v N

  3. v1 v2 F x Review: Work/Kinetic Energy Theorem: {NetWork done on object} = {change in kinetic energy of object} WF = K = 1/2mv22 - 1/2mv12 WF = Fx m

  4. F(x) x1 x2 dx Work done by Variable Force: (1D) • When the force was constant, we wrote W = F x • area under F vs. x plot: • For variable force, we find the areaby integrating: • dW = F(x) dx. F Wg x x

  5. dv Work/Kinetic Energy Theorem for a Variable Force dv F dx F dx dv dv dv v (chain rule) dx = = dx dt dx dt dv dx v dx v dv v22 v12 v22 v12

  6. 1-D Variable Force Example: Spring • For a spring we know that Fx = -kx. F(x) x1 x2 x relaxed position -kx F= - k x1 F= - k x2

  7. Spring... • The work done by the spring Wsduring a displacement from x1to x2 is the area under the F(x) vs x plot between x1and x2. F(x) x1 x2 x Ws relaxed position -kx

  8. Spring... • The work done by the spring Wsduring a displacement from x1to x2 is the area under the F(x) vs x plot between x1and x2. F(x) x1 x2 x Ws -kx

  9. Work & Energy • A box sliding on a horizontal frictionless surface runs into a fixed spring, compressing it a distance x1 from its relaxed position while momentarily coming to rest. • If the initial speed of the box were doubled and its mass were halved, how far x2 would the spring compress ? (a)(b) (c) x

  10. In the case of x1 Solution • Again, use the fact that WNET = DK. In this case, WNET =WSPRING = -1/2 kx2 and K = -1/2 mv2 so kx2 = mv2 x1 v1 m1 m1

  11. Solution So if v2 = 2v1 and m2 = m1/2 x2 v2 m2 m2

  12. Problem: Spring pulls on mass. • A spring (constant k) is stretched a distance d, and a mass m is hooked to its end. The mass is released (from rest). What is the speed of the mass when it returns to the relaxed position if it slides without friction? m relaxed position stretched position (at rest) m d after release m v back at relaxed position m vr

  13. Problem: Spring pulls on mass. • First find the net work done on the mass during the motion from x = d to x = 0 (only due to the spring): stretched position (at rest) m d relaxed position m i vr

  14. Problem: Spring pulls on mass. • Now find the change in kinetic energy of the mass: stretched position (at rest) m d relaxed position m i vr

  15. Problem: Spring pulls on mass. • Now use work kinetic-energy theorem: Wnet = WS = K. stretched position (at rest) m d relaxed position m i vr

  16. Problem: Spring pulls on mass. • Now suppose there is a coefficient of friction  between the block and the floor • The total work done on the block is now the sum of the work done by the spring WS (same as before) and the work done by friction Wf.Wf = f.Δr = -mgd r stretched position (at rest) m d relaxed position f= mg m i vr

  17. Problem: Spring pulls on mass. • Again use Wnet = WS + Wf = KWf = -mgd r stretched position (at rest) m d relaxed position f= mg m i vr

  18. F dr Work by variable force in 3-D: • Work dWF of a force F acting • through an infinitesimal • displacement dris: • dW = F.dr • The work of a big displacement through a variable force will be the integral of a set of infinitesimal displacements: • WTOT = F.dr ò

  19. m Work by variable force in 3-D:Newton’s Gravitational Force • Work dWg done on an object by gravity in a displacement drisgiven by: • dWg = Fg.dr= (-GMm / R2r).(dR r + Rd)dWg = (-GMm / R2)dR (sincer.= 0, r.r = 1) ^ ^ ^ ^ ^ ^ ^ ^ dR  ^ r dr Rd Fg d R M

  20. R2 R2 R1 R1 m Work by variable force in 3-D:Newton’s Gravitational Force • Integrate dWg to find the total work done by gravity in a “big”displacement: • Wg = dWg= (-GMm / R2)dR = GMm (1/R2 - 1/R1) Fg(R2) R2 Fg(R1) R1 M

  21. Work by variable force in 3-D:Newton’s Gravitational Force • Work done depends only on R1 and R2, not on the path taken. m R2 R1 M

  22. Newton’s Gravitational ForceNear the Earth’s Surface: • Suppose R1 = REand R2 = RE + ybut we have learned thatSo: Wg = -mgy m RE+ y RE M

  23. Recap of today’s lecture • Review • Work done by gravity near the Earth’s surface • Examples: • pendulum, inclined plane, free fall • Work done by variable force • Spring • Problem involving spring & friction • Work done by variable force in 3-D • Newton’s gravitational force • Look at textbook problems

More Related