1 / 7

Energy Conservation(cont.)

Energy Conservation(cont.). Example: Superheated water vapor is entering the steam turbine with a mass flow rate of 1 kg/s and exhausting as saturated steamas shown. Heat loss from the turbine is 10 kW under the following operating condition. Determine the power output of the turbine.

ryo
Download Presentation

Energy Conservation(cont.)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Energy Conservation(cont.) Example: Superheated water vapor is entering the steam turbine with a mass flow rate of 1 kg/s and exhausting as saturated steamas shown. Heat loss from the turbine is 10 kW under the following operating condition. Determine the power output of the turbine. From superheated vapor table: hin=3149.5 kJ/kg P=1.4 Mpa T=350 C V=80 m/s z=10 m 10 kw P=0.5 Mpa 100% saturated steam V=50 m/s z=5 m From saturated steam table: hout=2748.7 kJ/kg

  2. Saturated Steam f-liquid phase g-vapor phase • At saturation, these properties are all dependent: specify one to determine all • When Liquid and vapor phases coexist, the total mass of the mixture, m, is the sum of the liquid mass and the vapor mass: mt = mf+mg • The ratio of the mass of vapor to the total mass is called the quality of the mixture denoted by x, where x = mg / mt

  3. Note that for a liquid-vapor phase mixture, the quality, x, of the mixture is an independent property. Using the quality, x, to determine mixture porperties I. Volume: Total volume is the sum of liquid volume and vapor volume: V = Vf + Vg = mfvf + mgvg, where v is the specific volume or 1/r. [V = m(1/r) = mv] V/m = v = Vf/m + Vg/m = (mf/m)vf + (mg/m)vg = [(m-mg)/m]vf + (mg/m)vg = (1-x)vf+xvg= vf + x(vg-vf) = vf + xvfg, where vfg = vg-vf II. Internal Energy: Similarly, all other saturated thermodynamic properties, such as internal energy, u can be expressed in the same manner: internal energy: u = (1-x)uf+xug= uf + x(ug-uf) = uf + xufg since U = Uf + Ug = mfuf + mgug

  4. Saturated Steam Table hfg (kJ/kg) hg (kJ/Kg) p (Mpa) hf (kJ/kg) hg(p=0.5 Mpa) = 2746.4 + (2758.1-2746.4)/(0.6178-0.4758)*(0.5-0.4758) =2748.4 kJ/kg for 100% quality saturated vapor Example: If the quality is 50% and the temperature is 150 C hf = 632.2, hfg = 2114.2, hg = 2746.4 h = (1-x) hf + x hg = (1-0.5)(632.2) + 0.5(2746.4) = 1689.3 (kJ/kg)

  5. Superheated Steam h(p=1MPa, T=350C)=3157.7 kJ/kg h(p=1.5MPa, T=350C)=3147.4 kJ/kg h(p=1.4MPa, T=350C)=3157.7+(3147.7-3157.7)*(0.4/0.5) =3149.7 (kJ/kg)

  6. Compressed Liquids • Similar to the format of the superheated vapor table • In general, thermodynamic properties are not sensitive to pressure, therefore, one can • treat compressed liquids as a saturated liquid at the given TEMPERATURE. • Given: p and T: • However, the same does not usually apply to enthalpy, h. • Since h=u+pv, it depends more strongly on p. It can be approximated as:

  7. Compressed Liquid (contd) Example: Internal Energy, T = 100 C u5 MPA = 417.52, u10 MPA = 416.52, uf = 418.94 where Psat = 0.1MPa A pressure change by a factor of 100, leads to a change in u of less than 0.5% Enthalpy, T = 100 C h5 MPA = 422.72, h10 MPA = 426.12, hf = 419.04 where Psat = 0.1MPa A change of 1.7%

More Related