1 / 8

Liquid Phase Properties from VLE Data SVNA 12.1

Liquid Phase Properties from VLE Data SVNA 12.1. Purpose of this lecture : To illustrate how activity coefficients can be calculated from experimental VLE data obtained at low pressures Highlights

sabine
Download Presentation

Liquid Phase Properties from VLE Data SVNA 12.1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Liquid Phase Properties from VLE Data SVNA 12.1 • Purpose of this lecture: • To illustrate how activity coefficients can be calculated from experimental VLE data obtained at low pressures • Highlights • For our calculations we take advantage of the fact that as P->0 the vapour phase molecular interactions in a mixture at VLE become very weak, hence the vapour behaves as an ideal gas. In thermodynamic terms this can be written as • The modified form of Raoult’s law can then be used for the estimation of the activity coefficients from experimental low P VLE • Reading assignment: Section 12.1 (pp. 430-432) Lecture 15

  2. 7. Liquid Phase Properties from VLE Data SVNA 12.1 • The mixture fugacity of a component in non-ideal liquid solution is defined by: • (11.46) • We also define the activity coefficient: • (11.91) • which is a measure of the departure of the component behaviour from an ideal solution. • Using the activity coefficient, equation 11.46 becomes: • How do we calculate/measure these properties? Lecture 15

  3. Liquid Phase Properties from VLE Data • Suppose we conduct VLE experiments on our system of interest. • At a given temperature, we vary the system pressure by changing the cell volume. • Wait until equilibrium is established (usually hours) • Measure the compositions of the liquid and vapour Lecture 15

  4. Liquid Solution Fugacity from VLE Data • Our understanding of molecular dynamics does not permit us to predict non-ideal solution fugacities, fil . We must measure them by experiment, often by studies of vapour-liquid equilibria. • Suppose we need liquid solution fugacity data for a binary mixture of A+B at P,T. At equilibrium, • The vapour mixture fugacity for component i is given by, • (11.52) • If we conduct VLE experiments at low pressure, but at the required temperature, we can use • by assuming that iv = 1. Lecture 15

  5. Table 12.1 Liquid Solution Fugacity from Low P VLE Data • Since our experimental measurements are taken at equilibrium, • What we need is VLE data at various pressures (all relatively low) Lecture 15

  6. Activity Coefficients from Low P VLE Data • With a knowledge of the liquid solution fugacity, we can derive activity coefficients. Actual fugacity • Ideal solution fugacity • Our low pressure vapour fugacity simplifies fil to give: • and if P is close to Pisat: • leaving us with Lecture 15

  7. Table 12.2 Activity Coefficients from Low P VLE Data • Our low pressure VLE data can now be processed to yield experimental activity coefficient data: Lecture 15

  8. Activity Coefficients from Low P VLE Data Lecture 15

More Related