wink™

1. wink™ Lubricant and Release Agent For Professional Dental Use PULPDENT CORPORATION

2. WINK Water soluble lubricating solution and release agent in a convenient pump dispenser. Not a spray. PULPDENT

3. Greaseless , water soluble formula goes on smoothly and easily and washes off quickly with water. • Replaces petroleum jelly and other greasy, lumpy, hard to remove materials. • Apply with a cotton pellet. • Thins easily with air.

4. WINKEnsures accuracy and patient comfort. Saves time. INDICATIONS Lubricant for: • Outside surface of restorations to facilitate cement removal • Build ups, teeth and preps when making temporary restorations • Rubber dam to facilitate placement without tearing PULPDENT

5. WINKEnsures accuracy and patient comfort. Saves time. INDICATIONS Lubricant for: • Tight fitting implant abutments during try-in phase • Face and lips to prevent drying during long procedures • Hands when handling sticky materials PULPDENT

6. WINKEnsures accuracy and patient comfort. Saves time. INDICATIONS Quick release agent for: • All impression materials, even polyethers • Set cement from outside surfaces of restorations • Cement and impression material from face and tissue PULPDENT

7. WINKEnsures accuracy and patient comfort. Saves time. INDICATIONS Quick release agent for: • Temporary materials from resin crown build ups • Alginate impressions for diagnostic models • Buccal surfaces of dentures during reline procedures PULPDENT

8. WINKEnsures accuracy and patient comfort. Saves time. Easy release of set impressions prevents the distortion caused by torque and stresses during removal from the mouth. Even a small distortion can result in inaccurate models and restorations that do not fit properly. PULPDENT

9. WINK Have you ever struggled to remove an impression? Or remove set impression material from face and lips? Remove them in a blink with WINK. Just place a small amount of WINK on a cotton pellet or suitable applicator, and you’re ready to go. PULPDENT

10. WINK For easy removal of rigid final impressions, place a thin coat of Wink on facial and lingual tooth surfaces and on mucosa (but not the tooth prep when making final impressions). Impressions come off in a blink with WINK Apply a thin coat of WINK before making impressions PULPDENT

11. WINK NOTE: Do not place WINK on the tooth prep when making final impressions forpermanent restorations.

12. WINK A thin coat of WINK on face and lips makes removing set impression material from face and soft tissue a breeze. Set impression material peels off effortlessly Apply WINK to face and lips PULPDENT

13. For superior temporary restorations, lubricate preps and adjacent teeth with WINK and air thin. The set temporary material releases with ease from the teeth. Margins are crisp and easily readable. Perfect temporary with crisp margins is shown in the impression Apply WINK with a cotton pellet Air thin WINK

14. WINK Figure 1 shows WINK being placed into the inlay preparation prior to making a temporary inlay. Figure 2 shows the temporary inlay being easily removed from the preparation. Figure 1 Figure 2

15. WINK Place a thin coat of WINK on the outside of temporary restorations and removal of set cement is quick and effortless. PULPDENT

16. WINK Note: Avoid getting WINK under the margin of temporary or permanent restorations during cementation. PULPDENT

17. WINK Figure 1 shows a partial core build up. Figure 2 shows WINK being applied to the core prior to placement of the temporary material. After setting, the temporary will release easily. Figure 1 Figure 2

18. WINK Figure 1 shows the custom tray with provisional material in place after WINK was applied to the four anterior teeth. Figure 2 shows the custom tray and temporary after it was easily removed. Note that the provisional material released from the mouth and stayed in the tray. Figure 3 shows the finished temporary in place. Figure 1 Figure 2 Figure 3

19. WINK WINK is being placed on a natural tooth core and a partial core preparation prior to placement of provisional material. WINK is water soluble, washes off easily, and will not interfere with cementation.

20. WINK NOTE: Apply WINK on the tooth prep prior to making a temporary restoration. But do not apply WINK on the tooth prep when making final impressions for permanent restorations.

21. WINK During the try-in phase for tight fitting implants, place WINK on the implant abutment prior to try-in. Even tight fitting CAD/CAM implants release with ease.

22. WINK A thin coat of WINK lubricates rubber dam and facilitates placement without tearing. PULPDENT

23. WINK Instructions for Use • Dispense a small amount of WINK into a dappen dish or mixing well. • Apply a thin coat of WINK on the teeth, soft tissue or the outside of the restoration. Air thin if desired. • WINK easily washes off with water. Note: Avoid getting WINK under the margin of a restoration during cementation or on the tooth prep when a final impression is being made for a permanent restoration. When making an impression for a temporary restoration, applying WINK to the tooth prep is indicated. PULPDENT

24. WINK Code Description _ WINK 50mL Dispenser Bottle PULPDENT PULPDENT