100 likes | 134 Views
Fire Training. Fire Marshals. Fire Marshals. What to do when the Fire Alarm sounds. Step 1- Assemble at the reception area. Step 2- Open the Fire Box and hand out Fire Cards and Hi-Vis vests. Step 3- Fire Card 1 – Take charge of the evacuation (You are now the Fire Manager).
E N D
Fire Training Fire Marshals
Fire Marshals What to do when the Fire Alarm sounds
Step 2- Open the Fire Box and hand out Fire Cards and Hi-Vis vests
Step 3- Fire Card 1 – Take charge of the evacuation (You are now the Fire Manager) • Check Fire panel, make note of alarm zone and time of activation • Hand out Fire Cards and give clear instructions on what to do • Record all Report Back information • Meet Fire department and hand over all information collected
Step 4- Fire Card 2 –Take sign-in book to assembly pointand perform a roll call (Report back to the Fire Manager) • Ensure you do a complete Roll Call including Employees, Volunteers, Riders, Carers, Visitors and Contractors • If someone is missing, ask about where they were last seen • Report back to Fire Manager
Step 5- Fire Card 3 –Sweep the viewing area, if safe to do so ( Report back to Fire manager) • Only Sweep a area if instructed to do so by the Fire Manager • Do not fully enter the viewing area but rather call out from the entrance • Close all doors behind you as you leave • Report back to the Fire Manager
Step 6- Assemble at the designated Fire Assembly Point and await further instructions