1 / 20

SolidWorks Session 5

SolidWorks Session 5. Ferdowsi University of Mashhad Behnam Moetakef Imani. Draft. Draft tapers faces using a specified angle to selected faces in the model. You can specify the following types of draft : Neutral plane Parting line Step draft. Draft : Neutral Plane.

sadiek
Download Presentation

SolidWorks Session 5

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SolidWorks Session 5 Ferdowsi University of Mashhad Behnam Moetakef Imani

  2. Draft Draft tapers faces using a specified angle to selected faces in the model You can specify the following types of draft: Neutral plane Parting line Step draft

  3. Draft : Neutral Plane a. None : Drafts only the selected faces b. Along Tangent : Extends the draft to all faces that are tangent to the selected face

  4. Draft : Neutral Plane c. All Faces. Drafts all faces extruded from the neutral plane d. Inner Faces. Drafts all inner faces extruded from the neutral plane

  5. Draft : Neutral Plane e. Outer Faces. Drafts all outer faces next to the neutral plane

  6. Drafts : Parting Line The parting line option lets you draft surfaces around a parting line 3D Parting line

  7. Allow Reduced Angle • only with Parting Line • some portions of the drafted face may be smaller than the specified draft angle.

  8. Draft : Parting Line with Step Draft The step draft creates one face rotated about the plane used as the Direction of Pull

  9. Draft : Parting Line with Step Draft • Tapered and perpendicular steps in draft

  10. Draft Analysis • You can check the draft angles on your model using the draft analysis tool. Draft analysis creates a color-coded rendition of the model faces based on the angle and the direction of pull criteria that you specify • examine angle changes within a face

  11. Draft Analysis

  12. Draft Analysis Draft analysis

  13. Sweep 1 -Profile2 -Path

  14. Sweep with Guide Curves

  15. Sweep with Multiple Profiles

  16. Sweep with thin Feature

  17. Orientation/Twist Control Option

  18. Orientation/Twist Control Option

  19. Orientation/Twist Control Option

More Related