ISTFA 2013 A/V Guide for a Podium Presentation

1. Sample Title Slide Company Logo Company Logo allowed on title slide ONLY (optional) ISTFA 2013A/V Guide for a PodiumPresentation Im N. Engineer Sandy Nation Labs Desert, NM USA Authors and affiliations

2. Purpose Sample Purpose Slide (required) • Review the standards for preparing presentation visuals for ISTFA • Demonstrate the standards in a sample PowerPoint file • Provide the sample PowerPoint file as a model for creating your presentation Use Bold text on white (clear) background. Minimum font size is 20pt. Arial, Helvetica and Symbol US default fonts ONLY. Page numbers in lower right corner Starting on page 2

3. Outline Sample Outline Slide (required) • Introduction • Page Layout • Slide/Text Formatting • Good example • Bad example • Preparing Figures • Animation/Video • Using the “Presenter View” • Ideas for reducing the file size • Exceptions/Revisions • Summary

4. Introduction: Electronic Presentation at ISTFA • Software to use: • Microsoft PowerPoint • Motion effects or transitions can be effectively used to clearly state data • Do not use transitions gratuitously • Can be distracting to the audience • The AV committee determines if motion effects and transitions are excessive Minimum font size is 20pt.

5. Page Layout • File  Page Setup: • Slides sized for On-screen Show • Landscape mode • Maximum of 20 slides • Unless authorized by session chair • Page number at lower right • Four required slides: • Title, Purpose (#2), Outline (#3), Summary • No slide transitions or “custom animation" (motion effects) • Unless clearly beneficial to technical communication, e.g. figure overlays Page numbers in lower right corner

6. Slide/Text Formatting • Arial, Helvetica or Symbol fonts are easy to read • Math and Greek symbols are found in the Symbol font • Bold font, minimum of 20pt • Applies to text imported from other applications such as figure captions, legends, axis labels, etc. • Minimum size of 18pt acceptable for axis labels • Black or high-contrast color text on white (clear) background, or white/high-contrast text on dark background • Use color text carefully (View next 2 slides in viewer mode for examples)

7. Example – Good Slide Formatting (high contrast text & background combination) • Text is written in Arial, Helvetica or Symbol fonts Q = 90o l = 1064 nm • Bold font, minimum of 20pt • Applies to text imported from other applications such as figure captions, legends, axis labels, etc. • Minimum size of 18pt acceptable for axis labels. • Black or high-contrast color text on white/light background or white/light text on dark background • Use color text carefully (Good imported graph, line width and font size are visible) 7

8. Example – Bad Slide Formatting (low contrast text & background combination) • Small font size is hard to read across a crowded room • No bold makes lines thin and difficult to read (not everyone in the audience wears glasses) • Note • Bullet • Transitions • Can • Be • Distracting (Poor imported schematic, line width and font size not visible, text is to small) • This slide has too much information and too many colors on it making it difficult to read causing the audience to focus on what you have written on your slide versus what you are communicating. The audience would like to hear what you have to say instead of struggling to read it on your slide. A slide with this much information and/or bullets on it should be broken into 2 slides and made easier to read and convey data for the audience. The above schematic would be better broken into 2 pieces to demonstrate the key points of the layout. Bullet transitions if technically relevant should not be distracting. Color blind people can not distinguish between red & green.

9. Preparing Figures Imported curves must be thick and clear Imported text must conform to text guidelines

10. Temp. Sense Preparing Figures Imported images must be clearly labeled 2 INV. to Stress 4 AC 1 Current Controlled Oscillator (ICO) 2 NMOS Stress 3 3 1 4 Heater

11. Preparing Figures • Figures must be large and easy to read • Figures must take up at least 25% of the slide • Labeling within a figure must comply with presentation font guidelines (20 pt minimum) An example of a properly sized figure

12. Preparing Figures • Text in figures must be considered carefully • The example at the right is illegible • The figure itself is too small and of little value to audience members An example of a poorly sized figure, if you expect the audience to readdata in the figure

13. Animation/Video • Animation/Video can be used to clearly convey technical information • Animation and Video will be approved by the A/V chair when important for conveying technical content • Animation/Video used must be compatible with PowerPoint • Can not exit presentation to play animation/video • Files can be embedded into a presentation • Video files must be included with power point presentation for easy linking • .mpg or .avi format only

14. Using the Presenter View • New at ISTFA 2013 • “Presenter View” is a feature of MS PowerPoint • It allows 2 different views of the same slide set • One for the presenter • One for the audience • Note: All subsequent explanations and screen shots are using PowerPoint Version 2010

15. Using the Presenter View • Among other data, the presenter can • see all slide notes • see the several of the upcoming slides • see the time • easily go forward and backward to any chosen slide • More details at Microsoft:http://office.microsoft.com/en-us/powerpoint-help/what-is-presenter-view-HA010360603.aspx

16. Taking Advantage of thePresenter View • First, gain access to the notes pane • In case your window looks like the left one, click on View (1), then Normal (2) • Your window should now look like the one on the right (2) (1)

17. Taking Advantage of thePresenter View • Then add notes to each slide Add noteshere

18. Using the Presenter View • During the presentation you will see a screen like this one • The audience is still seeing only the full-screen slide Notes showup here Time & StatusInformation Next slides

19. Training with the Presenter View • To use the presenter view, you need 2 monitors • To activate, click the Slide Show menu (1) • Make selections in the ‘Monitors’ section (2) • Then start the presentation as normal (3) (3) (1) (2)

20. Reducing the File Sizeof your Presentation • Smaller file size helps in faster upload and download • MS PowerPoint has options to help you • Delete picture editing data • Compress figures • There are general options entries • Not recommended • The options also become accessible when you save the presentation

21. Reducing the File Size • In the ‘File’ Menu, select ‘Save As’ • Pull down ‘Tools’ (1), then select ‘Compress Pictures’ • Select 150dpi or 96dpi. • Double check that the presentation quality is still acceptable to you (1)

22. Reducing the File Size (cont.) • In the ‘Tools’ pull down from the previous slide, use ‘Save Options’, then select the ‘Advanced’ option • Find the ‘Image Size and Quality’ section Select “Discard editing data”

23. Exceptions/Revisions • Exceptions to the A/V Standards must be approved by the A/V Chair IN ADVANCE • The standards are meant to ensure high quality presentations that can be seen by everyone attending, not restrict technical expression • Send questions to your paper mentor, session chair or the A/V chair • NO CORRECTIONS to the presentation files will be allowed after the presentation has been accepted • NO CORRECTIONS to the presentation files are possible at ISTFA

24. Conclusions Sample Conclusions Slide (required) • When preparing your ISTFA PowerPoint presentation, follow the A/V Standards from the start • Remember: Corrections to the slides will NOT be possible at the Symposium • Ask questions early in the process to avoid complications. Contact your session chairs for questions • We are here to help you make a great presentation. Thank you for your participation and see you at ISTFA 2013