1 / 4

Mixer Settings for SHS Band Room

Mixer Settings for SHS Band Room. Connect powered speakers To Main Out. Plug mics in Bal/Unbal Starting with mic 1. Plug RCA cables in Tape Output to connect To Computer input. Low cut button Should be UP. Use these controls to adjust the Starting volume of each mic. These controls

salena
Download Presentation

Mixer Settings for SHS Band Room

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Mixer Settings for SHS Band Room Connect powered speakers To Main Out Plug mics in Bal/Unbal Starting with mic 1 Plug RCA cables in Tape Output to connect To Computer input

  2. Low cut button Should be UP Use these controls to adjust the Starting volume of each mic These controls are not used These controls are used to control Feedback if needed MUTE should be UP PAN is used to control if this mic is in left or right channel 1 - 2 should be DOWN The fader (slider) is used to control the volume of this mic 3 - 4 should be UP SOLO PFL should be UP

  3. All other controls are not used. Equalizer can change the balance of the frequencies of the music Phantom Power should be DOWN BREAK SWITCH should be UP Sub 3 & 4 are not used • SUB 2 • Left should be UP • Right should be DOWN Lights indicate how loud each channel is • SUB 1 • Left should be DOWN • Right should be UP Main mix is used to control all the volume for powered speakers Sub 1 is used to control the volume of the left channel Sub 2 is used to control the volume of the right channel

  4. In from the mixer Out to the stereo

More Related