1 / 13

Use of the Tephigram

Use of the Tephigram. Path of air parcel on tephigram. Consider a parcel of air lifted from the surface, e.g. by flow over a hill. Parcel initially at: 25 °C, dew point 8.5°, pressure 1000 mb. We can see that this corresponds to w = 7 g kg -1 As parcel ascends: T follows dry adiabatic

salena
Download Presentation

Use of the Tephigram

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Use of the Tephigram

  2. Path of air parcel on tephigram Consider a parcel of air lifted from the surface, e.g. by flow over a hill Parcel initially at: 25°C, dew point 8.5°, pressure 1000 mb. We can see that this corresponds to w = 7 g kg-1 As parcel ascends: T follows dry adiabatic Mixing ratio is constant until saturation (T = TD) Then parcel follows saturated adiabatic Cloud Lifting condensation level, LCL = 780 mb

  3. “Normand’s Theorem” Wet bulb potential temperature, θW is used to label saturated adiabats (value of T where adiabat crosses 1000 mb) Project the saturated adiabatic to 1000 mb. It is colder than the (unsaturated) temperature because water is evaporated into the air to keep it saturated, and the energy comes from the air. This is the definition of the wet bulb temperature. Cloud LCL TW T TD Dry adiabatic through the temperature, the mixing ratio line through the dew point, and the saturated adiabatic through the wet bulb temperature, all meet at the LCL

  4. Early morning tephigram over land No cloud Tropopause Boundary layer top Lifting Condensation Level = 930 mb Radiation inversion

  5. Mixing out of radiation inversion – solar heating at the ground Cloud top Cumulus layer LCL in the afternoon Surface warms from 18°C to 23°C

  6. Energy = area on tephigram. What happens if something pushes air parcel upwards? Convective available potential energy = area where Tparcel>Tenvironment Level of free convection Convective inhibition = area where Tparcel<Tenvironment

  7. Deep convection • Develops when CIN is small and CAPE is large • Need some CIN otherwise there is no ‘build-up’ of energy in the boundary layer • Mechanical forcing often needed to overcome CIN – e.g. flow over mountain, sea breeze, cold front • At other times large-scale forcing e.g. trough provides lift.

  8. Orographic uplift – lift each point on tephigram by 50 mb Initial profile. We will use the four coloured altitudes as examples

  9. Orographic uplift – lift each point on tephigram by 50 mb Lift the bottom point through 50 mb. It does not reach the LCL and remains unsaturated 50 mb

  10. Orographic uplift – lift each point on tephigram by 50 mb Lift the next point through 50 mb. It does reach saturation 50 mb

  11. Orographic uplift – lift each point on tephigram by 50 mb Lift the next two points through 50 mb. 50 mb

  12. Orographic uplift – lift each point on tephigram by 50 mb Join up the dots to get the new temperature profile. Hill Cloud

  13. Potential Instability Grey line: temperature profile lifted 50 mb Orange line: SALR from uplifted surface air Slope of grey line > SALR so convectively unstable where saturated: deep thunderstorms would occur on this day over a small hill Saturation

More Related