1 / 25

Wire Figures

Wire Figures. 7.5 heads tall Shoulders are 3 heads wide Arms: “ wingspan ” is equal to the height of the figure (7.5 heads) Torso and neck: 2 heads Waist & Pelvis: 1 head. Designing your figures is like doing a gesture drawing The essential elements of a pose Props can help

salim
Download Presentation

Wire Figures

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wire Figures

  2. 7.5 heads tall • Shoulders are 3 heads wide • Arms: “wingspan” is equal to the height of the figure (7.5 heads) • Torso and neck: 2 heads • Waist & Pelvis: 1 head

  3. Designing your figures is like doing a gesture drawing • The essential elements of a pose • Props can help • Your figure should tell a story

  4. Angelina Carter

  5. Jason Pinkerton

  6. Cody Shrope 2010

  7. Conductor Bass Player Professional Artist Rudy Kehkla @ rudykehkla.com

  8. Leonardo Da Vinci Picasso Professional Artist Rudy Kehkla @ rudykehkla.com

  9. What is Required of Your Sculpture: • Construct a humanoid figure using correct proportions • At least 2 parts of the figure must enclose volume • You may build your figure using a skeletal structure, contour structure, or any combination • Tell a story with your figure • The figure must be able to stand up on its own

  10. Sketch: • Two views of your proposed sculpture • Demonstrates volume in at least two places • Tells a story • Shows how it will be supported • This is a formative grade. • As soon as your sketch is approved we can start your sculpture!

  11. Starting the Figure Day 2

  12. Steps: • Start with the sketch. • Next, construct the head, spine, and shoulders of the figure – everything else attaches to this. • From there you will work constructing the figure however your logic dictates. • The last step will be to make sure the figure can securely stand on its own.

  13. Safety Concerns: • Be aware of where the end of wire is at all times. • Place a small loop on the end of the wire to prevent harm.

  14. Tool Use: • Needle-nose pliers have two parts: • A cutter, located where the round circle or indent is • Pincers, used to grab and bend the metal • Watch the pliers as you use them, they can pinch or cut

  15. Braiding • The best way to join two pieces of wire is to braid them • It makes a strong connection • It does not make a clump or knot which is unattractive • This is done by twisting or twining two piece of wire together over a length

  16. Crimping • Most of the time the wire can be bent by hand • Crimping is using the pliers to squeeze wire together, to create a smaller space between two ends of the wire • This can be used to create small details, like ribs or fingers

  17. Limb Styles and Attachment Day 3

  18. Outline w/twist Stick Figure

  19. Outline w/bones Wrapped Leg

More Related