1 / 14

Rectifier Concepts

Rectifier Concepts. Basic Concepts Pure resistive load Inductive load Load with an internal DC voltage. TexPoint fonts used in EMF. Read the TexPoint manual before you delete this box.: A A A A A A A. Single-phase bridge rectifiers. Idealised circuit with.

salvador-stanton
Download Presentation

Rectifier Concepts

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Rectifier Concepts Basic Concepts Pure resistive load Inductive load Load with an internal DC voltage TexPoint fonts used in EMF. Read the TexPoint manual before you delete this box.: AAAAAAA

  2. Single-phase bridge rectifiers Idealised circuit with

  3. When the source voltage is zero and increasing, we call it t = 0. Just prior to that instant, diode D3 is conducting and the voltage at the top of the diode is approximately zero volts. Let i(t) be the inductor current; load current Id. When D3 is conducting. Note that i(0) is zero and when D2 turns off the inductor current is Id.

  4. Single-phase bridge rectifiers Idealised circuit with Effect of on current commutation

  5. Single-phase bridge rectifiers This equation gives the final time.

  6. Three-phase, full-bridge rectifiers Idealised circuit with

  7. Three-phase, full-bridge rectifiers Effect of on current commutation Tutorial problems – 5-1, 5-3, 5-4, 5-11, 5-23, 5-25.

  8. Maple Script is: restart; currentdir("C:\\wattle\\courses\\PowerElectronics\\maple\\"); read "scrPracticalPage133.ma"; scrfw1phase-2.cir has the pSpice script to simulate it.

  9. Tutorial Problems • 6-1 • 6-3 • 6-5 (b) DPF = 0.707, PF = 0.636, THD = 48.55%. (c) DPF = 0.5, PF = 0.45, THD = 48.43%. • 6-9 • 6-12 • 6-18

More Related