1 / 15

ELECTRONIC NOTICE BOARD WITH MULTIPOINT RECEIVERS

Presented by Vineeth Menon Shyama Pradeep Geethu Gopakumar Roshan B.S. ELECTRONIC NOTICE BOARD WITH MULTIPOINT RECEIVERS. INTRODUCTION. To develop a new display system in school/colleges classrooms, which can be manipulated from administrator’s room

salvarez
Download Presentation

ELECTRONIC NOTICE BOARD WITH MULTIPOINT RECEIVERS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Presented by Vineeth Menon Shyama Pradeep Geethu Gopakumar Roshan B.S ELECTRONIC NOTICE BOARD WITH MULTIPOINT RECEIVERS

  2. INTRODUCTION • To develop a new display system in school/colleges classrooms, which can be manipulated from administrator’s room • Deals about an advanced electronic notice board with several receivers

  3. PROJECT DESCRIPTION • This project is designed with microcontroller (PIC),16 x 2 LCD, RS232, Buzzer, and Visual Basic • At receiver side,ie, at each classroom a display unit is mounted

  4. BLOCK DIAGRAM POWER SUPPLY LCD PIC 16F877 LCD PC MAX232 LCD

  5. BLOCK DIAGRAM DESCRIPTION POWER SUPPLY • The project requires regulated 5v supply • LM7805 is used as voltage regulator • Provides supply to MAX232,PIC and LCD

  6. MAX 232 • RS232 is an asynchronous serial communications protocol, widely used on computers • MAX 232 is used as a level shifter • Connected to serial port of PC

  7. PERIPHERAL INTERFACE CONTROLLER (PIC) • 16F877 is an 8-bit microcontroller • 8KB flash memory • 3KB data memory • RISC machine • 35 set of instructions • 5 I/O ports

  8. LIQUID CRYSTAL DISPLAY • LCD or Liquid Crystal Display is used in this system for display purpose • LCD used here is 16 X 2 LCD • Each class has its own display

  9. FEATURES • It is very reliable and saves time • Can store the message in the memory • It eliminates the use of a printer • It is user friendly

  10. GANTT CHART

  11. ENHANCEMENTS • Can be used to cover a wider range by the use of BLUETOOTH • Can increase the size of LCD so that it will be more practical • Wireless communication using WI-FI • Remote controlled LCD display • Multiplexing

  12. CONCLUSION • It eliminates the use of a printer • It is user friendly • Messages can be sent anytime

  13. THANK YOU

More Related